Digital Projection Showlite 5000sx+ Lcd Projector Users Manual

8-17
Enabling Last Memory [Last Memory]
The projector stores the last signal data in memory for each
input (RGB1, RGB2, DVI DIGITAL, Video, S-Video and Slot 1/
2).
This feature will reduce switching time between sources. If a
commercially available switcher is connected, turning on this
feature may cause the image to appear incorrectly.
Should this happen, turn this feature off to mute the screen
during switching.
Enabling Idle Mode [Idle Mode]
The projector has two standby modes: Standby and Idle....

8-18
Disabling the Cabinet Buttons [Control Panel Key Lock]
This option turns on or off the Control Panel Key Lock function.
NOTE:
* This Control Panel Key Lock does not affect the remote control functions.
* When the cabinet buttons are disabled, pressing and holding the CANCEL button
for about 10 seconds will change the setting to enable.
Lamp Settings
The projector is designed to accept two lamps (dual lamp sys-
tem). This dual lamp system provides prolong lamp life or high
brightness or extra lamp...

8-19
Status
Displaying Current Status of Link Mode
When selecting the tab Status, you will get the following dia-
log box.
Master ID ................. Indicates the Master projector
Status ...................... Indicates the status of the master pro-
jector
Connected PJ ..........Indicates number of connected slave
projectors
Slave  No .................. Indicates serial number of the slave pro-
jector
ID ............................. Indicates ID of a slave projector
Status .........................

8-20
Advanced
IP Address
An IP address can be automatically assigned to this projector
by your DHCP server. If your network does not automatically
assign IP address, ask your network administrator for an ad-
dress, and then register it manually.
Automatic .... Automatically assigns an IP address to the pro-
jector from a DHCP server.
Manual ........ Provides a space for you to register the IP ad-
dress or subnet mask number obtained from your
network administrator.
IP Address ... Set your IP address....

8-21
WEP (for Wireless only)
Select this option whether using the WEP (Wired Equivalent Pri-
vacy) key for encryption or not. To use encryption, specify WEP
key.
Disable ........ Will not turn on the encryption feature. Your com-
munications may be monitored by someone.
64bit ............ Uses 64-bit datalength for secure transmission.
128bit .......... Uses 128-bit datalength for secure transmission.
This option will increase privacy and security
when compared to use of 64bit datalength en-
cryption....

8-22
Mail
NOTE: To the Mail Alert feature on wireless LAN connection, select Infrastructurefor Mode in Network Type. .
Alert Mail:
Checking this box enables Alert Mail feature.
This option notifies your computer of an error message via e-
mail when using wireless or wired LAN. The error message
will be notified when the projector lamp has reached the end
of its usable life or an error occurs in the projector.
Sample of a message sent from the projector:
The lamp is at the end of its usable life. Please...

8-23
8. Using On-Screen Menu
Setting a Password
A password can be set for your projector to avoid operation by an
unauthorized person.
There are two password options: one for menu and the other for
logo.
When a password is set, doing any one of the following four op-
erations will display the Password input screen.
For Menu:
*Changing the menu to Advanced
*Editing the custom menu
For Logo:*Changing the background
*Changing the logo data in PC Card Files
Procedures for Password setting apply to both Menu...

8-24
Enable/Disable ........ This turns the Security function on or off.
Keyword .................. Enter an appropriate keyword when you
use the Security function.
(Up to 10 characters can be used.)
The Security function is available only
when your keyword is entered.
Use Protect key .......Check this box to lock your projector
when using a PC card. To use a key-
word without a PC card, do not check
this box.
Drive ........................ Switches between PC Card slots.
Read ...........................

8-25
To delete PC card data you registered.
1. Use the SELECT 
 button to select Delete and use the SELECT button to select the list window.
2. Use the SELECT 

 button to select the PC card data you wish to
delete.
3. Press the SELECT 
 button to select Delete and press the ENTER
button.
The PC card data will be deleted.
If youve lost your registered PC card, proceed as follows:
NOTE: Digital Projection or your dealer will provide you with your Release Code inexchange for your registered keyword and...

8-26
8. Using On-Screen Menu
3. Select “Edit” and press the ENTER button to open the Edit window.
4. Set the Day, Time (24 hours format), On-Time and Off-Time using the
SELECT buttons and the Software keyboard (1 thru 10).
5. Select On Timer or Off Timer
6. Repeat the Timer
To repeat the On Timer or Off Timer program every week, place a check
mark in “Repeat”.
7. Select “OK” and press the ENTER button on the remote control to com-
plete the setting. To cancel this and return to its previous screen,...