Digital Projection Projector M Vision Cine 230 User Manual

Rev A December 2010 Page 4.21
Digital Projection M-Vision Cine 230, Cine 260, Cine 400 User Manual 4. Controlling the projector

Source Enable
Press ENTER or SELECT.
The Source Enable submenu will appear:
Use the  and  keys to select from:
HDMI 1
HDMI 2
RGB
Component 1
Component 2
Video
S-Video
For each source, use the  and  keys to select from:
On the selected source will be included in an automatic input source 
search
Off the selected source will not be included in an automatic input 
source search...

Page 4.22 Rev A December 2010
4. Controlling the projector Digital Projection M-Vision Cine 230, Cine 260, Cine 400 User Manual

Menu Position
Use the  and  keys to select from:
Top left
Top right
Bottom left
Bottom right
Centre
Blank Screen
This option determines what appears on screen when the projector is sear\
ching for 
a valid input source.
Use the  and  keys to select from:
Digital Projection logo
Black screen
Blue screen
White screen
Auto Power On
Use the  and  keys to select from:
On    When...

Rev A December 2010 Page 4.23
Digital Projection M-Vision Cine 230, Cine 260, Cine 400 User Manual 4. Controlling the projector

Rear Projection
Use the  and  keys to select from:
On   Projected image is reversed, left to right
Off
Ceiling Mode
Use the  and  keys to select from:
On   Projected image is reversed, top to bottom
Off
Logo Display
Use the  and  keys to select from:
On   The Digital Projection logo is displayed during power up
Off
•
•
•
Notes
 To exit from the menus 
completely, you may need...

Page 4.24 Rev A December 2010
4. Controlling the projector Digital Projection M-Vision Cine 230, Cine 260, Cine 400 User Manual

Notes
 To select a different menu, 
press MENU  once or 
twice, so that no items are 
highlighted, then use the 
 and  keys to select a 
different page.
 To exit from the menus 
completely, you may need to 
press  up to three times.
 For more information about 
the trigger output, see Control 
connections in section 
6.  Appendix. 
 For more information about 
RS232 commands,...

Rev A December 2010 Page 4.25
Digital Projection M-Vision Cine 230, Cine 260, Cine 400 User Manual 4. Controlling the projector

Notes
 To set what a ‘blank’ screen 
looks like, use the Blank 
Screen setting in the System 
menu.
 To select a different menu, 
press MENU  once or 
twice, so that no items are 
highlighted, then use the 
 and  keys to select a 
different page.
 To exit from the menus 
completely, you may need to 
press  up to three times.
 If a source has been disabled in 
the System menu,...

Page 4.26 Rev A December 2010
4. Controlling the projector Digital Projection M-Vision Cine 230, Cine 260, Cine 400 User Manual

Notes
 To select a different menu, 
press MENU  once or 
twice, so that no items are 
highlighted, then use the 
 and  keys to select a 
different page.
 To exit from the menus 
completely, you may need to 
press  up to three times.
 Restore Defaults will restore 
all settings to factory 
defaults.
  If you are not sure this is 
what you want to do, then 
either:
 make a...

Rev A December 2010 Page 4.27
Digital Projection M-Vision Cine 230, Cine 260, Cine 400 User Manual 4. Controlling the projector

Blue Only
This is useful for color-calibrating the projector or other video compon\
ents.
Use the  and  keys to select from:
On only the blue signal is displayed - green and red are turned off
Off    all three signals - red, green and blue - are displayed
Test Patterns
Use the  and  keys to select from:
Test Pattern Off
White
Black
Red
Green
Blue
Cyan
Magenta
Yellow...

Page 4.28 Rev A December 2010
4. Controlling the projector Digital Projection M-Vision Cine 230, Cine 260, Cine 400 User Manual 

Rev A December 2010  Page 5.1
5. Maintenance
Contents
Changing the lamp module ........................................................................\
......................................5.2
Cleaning the fans ........................................................................\
........................................................5.3 

Page 5.2 Rev A December 2010
5. Maintenance Digital Projection M-Vision Cine 230, Cine 260, Cine 400 User Manual

Changing the lamp module
Turn the power OFF and allow the lamp to cool for 5 minutes.
Unscrew the captive finger screw securing the lamp door, and remove the door.
Unscrew the two cross-head screws securing the lamp module to the projec\
tor
Lift the wire handle up and use it to pull out the lamp module.
Fit a new lamp module, pushing it firmly into place.
Tighten the two cross-head screws....