Digital Projection Projector M Vision Cine 230 User Manual

Rev A December 2010 Page 4.11
Digital Projection M-Vision Cine 230, Cine 260, Cine 400 User Manual 4. Controlling the projector

Brightness
Press  or  once. 
After the first press, the Brightness adjustment bar will appear:
Use the  and  keys to adjust the Brightness from 0 to 200:
To return to the Main menu, press  once.
Contrast
Press  or  once. 
After the first press, the Contrast adjustment bar will appear.
Use the  and  keys to adjust the Contrast from 0 to 200:
To return to the Main menu, press...

Page 4.12 Rev A December 2010
4. Controlling the projector Digital Projection M-Vision Cine 230, Cine 260, Cine 400 User Manual

Notes
 To exit from the menus 
completely, you may need to 
press  up to three times.
 Image changes made using 
the menus will take effect 
immediately.
 Some menu items may be 
greyed out - unavailable due to 
the effect of settings made in 
other menus, or due to the type 
of input signal.
 When the Aspect Ratio is set 
to Native, Overscan can only 
be set to Off or Crop...

Rev A December 2010 Page 4.13
Digital Projection M-Vision Cine 230, Cine 260, Cine 400 User Manual 4. Controlling the projector

Input Select
Press ENTER or SELECT.
The Input select submenu will appear:
Use the  and  keys to select from:
HDMI 1
HDMI 2
RGB
Component 1
Component 2
Video
S-Video
Press ENTER or SELECT, to select a different input source.
To return to the Main menu, press  once.
Resync
If the image has become unstable or degraded, it may be possible to impr\
ove the 
display:
Press ENTER or...

Page 4.14 Rev A December 2010
4. Controlling the projector Digital Projection M-Vision Cine 230, Cine 260, Cine 400 User Manual

Notes
 To select a different menu, 
press MENU  once or 
twice, so that no items are 
highlighted, then use the 
 and  keys to select a 
different page.
 To exit from the menus 
completely, you may need to 
press  up to three times.
 The Color Mode feature 
applies only to the MVision 
Cine 400.
  Image changes made using 
the menus will take effect 
immediately.
 Some menu...

Rev A December 2010 Page 4.15
Digital Projection M-Vision Cine 230, Cine 260, Cine 400 User Manual 4. Controlling the projector

Video Standard
In most cases, the Auto setting will determine the correct video standard to use. If it 
does not, you can select the appropriate setting manually.
Use the  and  keys to select from:
Auto 
NTSC used mainly in the United States and Japan
PAL  used in Europe, Australia and many other parts of the world, 
typically with a 50Hz frame rate
SECAM used mainly in France...

Page 4.16 Rev A December 2010
4. Controlling the projector Digital Projection M-Vision Cine 230, Cine 260, Cine 400 User Manual

Colour Gamut
In most cases, the Auto setting will determine the correct colour gamut to use. If it 
does not, you can select the appropriate setting manually. 
Each setting defines the precise hue of each primary (red, green and bl\
ue) and 
secondary (yellow, cyan and magenta) color component used to generate the 
image.
Use the  and  keys to select from:
Auto
SMPTE-C for...

Rev A December 2010 Page 4.17
Digital Projection M-Vision Cine 230, Cine 260, Cine 400 User Manual 4. Controlling the projector

RGB Adjust
Press ENTER or SELECT.
The RGB Adjust submenu will appear:
Use the Gain controls to correct color imbalances in the bright areas of\
 the image. 
Use the Offset controls in the RGB Adjust sub-menu to correct color imbalances in 
the dark areas of the image.
Use the  and  keys to select from:
Red Offset
Blue Offset
Green Offset
Red Gain
Blue Gain
Green Gain
Offsets...

Page 4.18 Rev A December 2010
4. Controlling the projector Digital Projection M-Vision Cine 230, Cine 260, Cine 400 User Manual

Fine Sync
Press ENTER or SELECT.
The Fine Sync submenu will appear:
Use the  and  keys to select from:
V Position fine tunes the vertical position of the image
H Position fine tunes the horizontal position of the image
Tracking  adjusts the frequency of the pixel sampling clock, so that all pixels 
generated by the video source are sampled. Steady flickering 
or several soft...

Rev A December 2010 Page 4.19
Digital Projection M-Vision Cine 230, Cine 260, Cine 400 User Manual 4. Controlling the projector

Notes
 To select a different menu, 
press MENU  once or 
twice, so that no items are 
highlighted, then use the 
 and  keys to select a 
different page.
 To exit from the menus 
completely, you may need to 
press  up to three times.
 Image changes made using 
the menus will take effect 
immediately.
 Some menu items may be 
greyed out - unavailable due to 
the effect of...

Page 4.20 Rev A December 2010
4. Controlling the projector Digital Projection M-Vision Cine 230, Cine 260, Cine 400 User Manual

System menu
To display the menus, press MENU  on the remote control or the projector 
control panel.
Use the  and  keys to select the System menu page,
To select a menu item, use the  and  keys until the item is highlighted.
Language
This product is available only in English at present.
•
•
•
Notes
 To select a different menu, 
press MENU  once or 
twice, so that no items are...