Digital Projection Projector M Vision Cine 230 User Manual

Rev A December 2010 Page 5.3
Digital Projection M-Vision Cine 230, Cine 260, Cine 400 User Manual 5. Maintenance

Cleaning the fans
Turn the power OFF and wait until the fans stop.
Use a vacuum cleaner to clean the inlet and outlet fans, as shown below.
•
•
Notes
 Always switch the projector 
OFF before cleaning the fans.
 Always allow the lamp to cool 
for 5 minutes before: 
- disconnecting the power 
- moving the projector 
- changing the lamp
  The fans should be cleaned 
regularly:
In a clean...

Page 5.4 Rev A December 2010
5. Maintenance Digital Projection M-Vision Cine 230, Cine 260, Cine 400 User Manual 

Rev A December 2010  Page 6.1
6. Appendix
Contents
Troubleshooting ........................................................................\
..........................................................6.2
Error codes ........................................................................\
..............................................................6.4
Specifications ........................................................................\...

Page 6.2 Rev A December 2010
6. Appendix Digital Projection M-Vision Cine 230, Cine 260, Cine 400 User Manual

Troubleshooting
ProblemPossible solutions
The red ISSUE indicator is illuminated 
continuously or flashing.
Check the Error codes detailed on the next page.
The projector will not power up.Check that the mains plug is plugged in and that the mains supply is swi\
tched on.
Check that the lamp door is closed properly.
Check any external fuses or breakers.
The projector will not power up shortly...

Rev A December 2010 Page 6.3
Digital Projection M-Vision Cine 230, Cine 260, Cine 400 User Manual 6. Appendix

ProblemPossible solutions
Image is split or otherwise scrambled.Check that the image source is not set to progressive scan.
Image is blurred.Check that the lens is focussed correctly.
Image is too bright, and lacks 
definition in the bright areas.
Decrease the contrast setting.
See section 4. Controlling the projector, Using the control keys and Main 
menu
Image appears ‘washed out’ and is too...

Page 6.4 Rev A December 2010
6. Appendix Digital Projection M-Vision Cine 230, Cine 260, Cine 400 User Manual

Error codes
If the projector detects an error, the red Issue indicator will flash, as shown in the 
chart below.
For example, if the lamp door is left open, the red indicator will flash\
 twice followed 
by a pause, then the sequence will repeat until the error condition is c\
orrected.
Notes 

Rev A December 2010 Page 6.5
Digital Projection M-Vision Cine 230, Cine 260, Cine 400 User Manual 6. Appendix

Specifications
Part numbers
Projector  Cine 230 Cine 260 HC  Cine 260 HB Cine 400
0.73:1 fixed lens      ---     ---  110-508 111-147
1.56–1.86:1 lens  111-144 110-005  110-506 111-148
1.85–2.40:1 lens 111-145 110-006 110-507 111-149
0.8x converter lens  109-727
1.25x converter lens 109-735
Power cable 10A, Europe 102-163
Power cable 13A, North America 102-165
Power cable 10A, United Kingdom...

Page 6.6 Rev A December 2010
6. Appendix Digital Projection M-Vision Cine 230, Cine 260, Cine 400 User Manual

Focus range
0.73:1 Fixed lens to be confirmed
1.56–1.86:1 zoom lens  2–7m (6.6 - 23ft)
1.85–2.40:1 zoom lens 2.5–10m (8.2 - 32.8ft)
Image width
0.73:1 fixed lens to be confirmed
1.56–1.86:1 zoom lens 0.86 to 5.6m (2.8 - 18.4ft) depending on lens converter
1.85–2.40:1 zoom lens 0.81 to 6.86m (2.7 - 22.2ft) depending on lens converter
Lens shift (zoom lenses only) Vertical  Horizontal
1.56 - 1.86...

Rev A December 2010 Page 6.7
Digital Projection M-Vision Cine 230, Cine 260, Cine 400 User Manual 6. Appendix

Dimensions
Cine 230, Cine 260
All dimensions in mm unless otherwise stated 

Page 6.8 Rev A December 2010
6. Appendix Digital Projection M-Vision Cine 230, Cine 260, Cine 400 User Manual

Cine 400
All dimensions in mm unless otherwise stated