Digital Projection Projector HIGHlite Laser II 3D Series User Manual

page 143
Reference Guide
APPENDIX F: GLOSSARY OF TERMS
TheaterScope
An aspect ratio used in conjunction with a special anamorphic lens to display 2.35:1 images packed into a 16:9 frame.
Throw distance
The distance between the screen and the projector.
Throw ratio
The ratio of the throw distance to the screen width.
TRC (Throw ratio correction)
A special number used in calculating throw distances and throw ratios when the image does not fill the width of the DMD™.
TRC is the ratio of the DMD™ aspect ratio...

page 144
Reference Guide
APPENDIX F: GLOSSARY OF TERMS
Vista
An aspect ratio of 1.66:1.
WUXGA
A display resolution of 1920 x 1200 pixels with a 16:10 screen aspect ratio. (Stands for Widescreen Ultra Extended Graphics Array.)
Y
This is the luminance input (brightness) from a Component Video signal.
YUV
See Pr, Pb.
ZScreen
A special kind of light modulator which polarizes the projected image for 3D viewing. It normally requires that images are projected onto a 
silver screen. The ZScreen is placed between...

page 145
Reference Guide
TECHNICAL SPECIFICATIONS
Technical Specifications
Digital Projection reserves the right to change product specifications without prior notice.
Models
The specifications on these pages refer to the following projector:
Series name
HIGHlite Laser II 3D
Color system: 3-chip DLP®
Display type: 3 x 0.67” DarkChip™ DMD™
DMD™	specification	(native):	1920 x 1200 pixels, +/- 12° tilt angle
Fast transit pixels for smooth grayscale and improved contrast.
Notes 
Digital Projection HIGHlite...

page 146
Reference Guide
TECHNICAL SPECIFICATIONS
Inputs and outputs
TypeConnectorQtyTypeConnectorQty
Video & ComputerCommunication & Control
HDMI 1.4HDMI23D Sync OutBNC1
DisplayPort 1.1aDisplayPort13D Sync InBNC1
HDBaseT/LANRJ451LAN (shared with HDBaseT)RJ451
3G-SDI InBNC1RS2329-pin D-Sub1
3G-SDI OutBNC1Wired Remote3.5 mm Stereo Jack1
VGA15-pin D-Sub112V Trigger3.5 mm Stereo Jack2
Component Video3 x BNC1Service PortUSB Type A1
Bandwidth
• 170 MHz on analog RGB
• 165 Megapixels per second on HDMI
• 295...

page 147
Reference Guide
TECHNICAL SPECIFICATIONS
Lenses
Detailed information about available lenses can be found in Appendix A: Lens Part Numbers.
Further information about lens offsets can be found in Positioning The Image > Maximum offset range.
Lens mount
• Motorised shift, zoom and focus.
Mechanical mounting
• Front/Rear Table
• Front/Rear Ceiling
• Adjustable Front/Rear Feet
Orientation
• Table Top or Inverted: Yes 
• Pointing Up:   Ye s
• Pointing Down:  Yes 
• Roll (Portrait):   Ye s
Notes...

page 148
Reference Guide
TECHNICAL SPECIFICATIONS
Electrical and physical specifications
• Power requirements110-240 VAC, 50-60 Hz (single phase)
• Power Consumption1700 W
• Thermal Dissipation5800 BTU/hr
• Fan Noise52 dBA
• Operating Temperature0°C to 35°C (32 to 95F)
• Storage Temperature-20°C to 60°C (-4 to 140F)
• Operating Humidity20% to 90% non-condensing
• Weight55 kg (121.3 lbs)
• DimensionsH: 26.5 cm W: 58.5 cm L: 71.0 cm (without lens hood)
H: 10.4 in W: 23.0 in L: 28.0 in (without lens hood)...

Reference Guide 
Digital Projection HIGHlite Laser II 3D Series  
This page is intentionally left blank.  

Digital Projection Limited
Greenside Way, Middleton Manchester M24 1XX, UK
Registered in England No. 2207264 Registered Office: as above
Tel (+44) 161 947 3300 Fax (+44) 161 684 7674
[email protected] [email protected]
www.digitalprojection.co.uk
Digital Projection Inc.
55 Chastain Road, Suite 115 Kennesaw, GA 30144, USA
Tel (+1) 770 420 1350 Fax (+1) 770 420 1360
[email protected] www.digitalprojection.com
Digital Projection China
中国 北京市  朝阳区 芍药居北里101号...