Digital Projection Projector HIGHlite Laser 3D Series User Manual

							page 103
Reference Guide
APPENDIX B: LENS CHARTS
1.33:1 images
10.77	:	1	fixed	lens
21.16	:	1	fixed	lens
31.45 - 1.74 : 1 zoom lens
41.74 - 2.17 : 1 zoom lens
52.17 - 2.90 : 1 zoom lens
62.90 - 4.34 : 1 zoom lens
74.34 - 6.76 : 1 zoom lens
Notes
 This chart has a TRC of 1.2, for use 
with the following images:
 For information about individual 
lens part numbers, see  Appendix A 
earlier in this document.
  Do not use the short lens hood 
with the long throw lens.
  For further information about using 
the right lens and hood, see  The 
lens hood  in the Installation and 
Quick-Start Guide .
1.33:1 (4:3)
Throw distance
Screen width
6 m 
(19.7 ft) 12 m 
(39.3 ft) 18 m 
(59 ft) 24 m 
(78.7 ft) 36 m 
(118.1 ft)
30 m 
(98.4 ft)
123456
1 m (3.3 ft) 2 m (6.6 ft) 3 m (9.8 ft)
4 m (13.1 ft) 5 m (16.4 ft) 6 m (19.7 ft)
   
Digital Projection HIGHlite Laser 3D Series 
Rev C Februar y 2015  
						

							page 104
Reference Guide
APPENDIX C: SUPPORTED SIGNAL INPUT MODES
Appendix C: Suppor ted Signal Input Modes
2D input modes
StandardResolutionVertical Frequency (Hz)Total number of linesHorizontal  Frequency (kHz)Component 1 & 2VGAHDMI 1 & 2 / HDBaseTDVI (DVI-D)3GSDI
SDTV480i720 x 48059.9452515.73üü
576i720 x 57650.0062515.63üü
EDTV480p59720 x 48059.9452531.47üüü
480p60720 x 48060.0052531.50üüü
576p50720 x 57650.0062531.25üüü
HDTV720p501280 x 72050.0075037.50üüüü
720p591280 x 72059.9475044.96üüü
720p601280 x 72060.0075045.00üüü
1080p231920 x 108023.98112526.97üüü
1080p241920 x 108024.00112527.00üüü
1080p251920 x 108025.00112528.13üüü
1080p291920 x 108029.97112533.72üüü
1080p301920 x 108030.00112533.75üüü
1080i501920 x 108050.00112528.13üüü
1080p501920 x 108050.00112556.25üüüü
1080i591920 x 108059.94112533.72üüü
1080p591920 x 108059.94112567.43üüüü
1080i601920 x 108060.00112533.75üüü
1080p601920 x 108060.00112567.50üüü
COMPUTERVGA59640 x 48059.9452531.47üüü
VGA60640 x 48060.0052531.50üüü
MACI640 x 48066.6752535.00üü
VGA75640 x 48075.0050037.50üüü
Notes
   
Digital Projection HIGHlite Laser 3D Series 
Rev C Februar y 2015  
						

							page 105
Reference Guide
APPENDIX C: SUPPORTED SIGNAL INPUT MODES
StandardResolutionVertical Frequency (Hz)Total number of linesHorizontal  Frequency (kHz)Component 1 & 2VGAHDMI 1 & 2 / HDBaseTDVI (DVI-D)3GSDI
COMPUTER 
(continued)
SVGA60800 x 60060.3262837.88üüü
SVGA75800 x 60075.0062546.88üüü
SVGA85800 x 60085.0663153.67üüü
MACII832 x 62475.08112049.10üü
XGA601024 x 76860.0080648.36üü
XGA701024 x 76870.0780656.48üü
XGA751024 x 76875.0380060.02üü
WXGA501280 x 72049.8374437.07üü
WXGA601280 x 76859.8779847.78üü
WXGA751280 x 76874.8980560.29üü
WXGA851280 x 76884.8480968.63üü
WXGA501280 x 80050.0082641.26üüü
WXGA601280 x 80059.8183149.70üüü
WXGA751280 x 80074.9383862.80üüü
SXGA601280 x 102460.02106663.98üüü
SXGA751280 x 102475.02106679.98üüü
SXGA851280 x 102485.02107291.15üüü
SXGA+601400 x 105059.98108965.32üüü
SXGA+751400 x 105074.87108982.28üüü
UXGA601600 x 120060.00125075.00üüü
WSXGA+601680 x 105059.95108965.29üüü
FHD501920 x 108049.92111 455.62üü
WUXGA601920 x 120059.95123574.04üüü
Notes
   
Digital Projection HIGHlite Laser 3D Series 
Rev C Februar y 2015  
						

							page 106
Reference Guide
APPENDIX C: SUPPORTED SIGNAL INPUT MODES
3D input modes
StandardResolutionVertical Frequency (Hz)Total number of linesHorizontal  Frequency (kHz)HDMI 1 / HDMI 2 / HDBaseTDual PipeDVI (DVI-D)
SXGA60 Dual Pipe1280 x 102460.02106663.98ü
SXGA+60 Dual Pipe1400 x 105059.98108965.32ü
WUXGA60 Dual Pipe1920 x 120059.95123574.04ü
720p50 Frame Packing1280 x 72050.00147037.50ü
720p50 Side-by-Side (Half)1280 x 72050.00147037.50ü
720p50 Top-and-Bottom1280 x 72050.0075037.50ü
720p50 Dual Pipe1280 x 72050.0075037.50ü
1080i50 Side-by-Side (Half)1920 x 108050.00112556.25ü
1080p24 Frame Packing1920 x 108024.00220527.00ü
1080p24 Side-by-Side (Half)1920 x 108024.00220527.00ü
1080p24 Top-and-Bottom1920 x 108024.00220527.00ü
1080p24 Dual Pipe1920 x 108024.00220527.00ü
1080p30 Frame Packing1920 x 108030.00112533.75ü
1080p30 Side-by-Side (Half)1920 x 108030.00112533.75ü
1080p30 Top-and-Bottom1920 x 108030.00112533.75ü
1080p30 Dual Pipe1920 x 108030.00112533.75ü
1080p50 Side-by-Side (Half)1920 x 108050.00112556.25ü
1080p50 Top-and-Bottom1920 x 108050.00112556.25ü
1080p50 Dual Pipe1920 x 108050.00112556.25ü
1080p60 Side-by-Side (Half)1920 x 108060.00112567.50ü
1080p60 Top-and-Bottom1920 x 108060.00112567.50ü
1080p60 Dual Pipe1920 x 108060.00112567.50ü
1080p100 Frame Sequential1920 x 1080100.001133113.22ü
1080p120 Frame Sequential1920 x 1080120.001144137.26ü
WUXGA100 Frame Sequential1920X1200100.001258125.72ü
WUXGA120 Frame Sequential1920X1200120.001271152.40ü
Notes
 Only the HDMI 1 & 2 and HDBaseT 
inputs support HDMI 1.4 3D formats.
   
Digital Projection HIGHlite Laser 3D Series 
Rev C Februar y 2015  
						

							page 107
Reference Guide
APPENDIX D: MENU MAP
Appendix D: Menu Map
Menu Sub Menus
MAIN
Input HDMI1, HDMI2, VGA, Comp1, Comp2, DVI, HDBaseT, SDI
Test Pattern Off, White, Black, Red, Green, Blue, CheckerBoard, CrossHatch, V Burst, H Burst, Color Bar
LENS
Lens Control
Zoom / Focus mode
 Zoom (uses input from the UP and DOWN arrows to zoom the image)
 Focus (uses input from the LEFT and RIGHT arrows to focus the image)
Lens Shift mode
 Lens Shift (uses input from the arrows to shift the lens)
Lens Center (command)
IMAGE
Brightness (slider, value range 0~ 200 [10 0])
Contrast (slider, value range 0~ 200 [10 0])
Gamma 1.0, 1.8, 2.0, 2.2, 2.35, 2.5
Adaptive Contrast Off, On
Saturation (slider, value range 0~ 200 [10 0])
Hue (slider, value range 0~ 200 [10 0])
Sharpness (slider, value range 0~ 200 [10 0])
Noise Reduction (slider, value range 0~ 200 [10 0])
Position and Phase
V Position (slider, value range 0~ 200 [10 0])
H Position (slider, value range 0~ 200 [10 0])
Phase (slider, value range 0~ 200 [10 0])
Tracking (slider, value range 0~ 200 [10 0])
Sync Level (slider, value range 0~ 200 [10 0])
Resync (command)
Notes
 Some of the information in this menu 
map is summarised. See the actual 
menu on the projector for full details.
 The underlined text  represents 
the factory default value for each 
setting.
   
Digital Projection HIGHlite Laser 3D Series 
Rev C Februar y 2015  
						

							page 108
Reference Guide
APPENDIX D: MENU MAP
Menu Sub Menus
COLOR
Color Space Auto, YPbPr, YCbCr, RGB PC, RGB Video
Color Temperature 3200K, 5400K, 6500K, 7500K, 9300K, Native
Color Gamut Auto, REC709, SMPTE-C, EBU, Native, User
User Gamut
Measure Gamut
 Red x (slider, value range 0.550 ~ 0.750 [0.662])
 Red y (slider, value range 0.250 ~ 0.450 [0.334])
 Green x (slider, value range 0.200 ~ 0.400 [0.322])
 Green y (slider, value range 0.400 ~ 0.750 [0.656])
 Blue x (slider, value range 0.050 ~ 0.250 [0 .13 8 ])
 Blue y (slider, value range 0.000 ~ 0.120 [0.042])
 White x (slider, value range 0.200 ~ 0.400 [0.2 91])
 White y (slider, value range 0.250 ~ 0.450 [0.334])
Target RGBW Gamut
 Red x (slider, value range 0.550 ~ 0.750 [0.662])
 Red y (slider, value range 0.250 ~ 0.450 [0.334])
 Green x (slider, value range 0.200 ~ 0.400 [0.322])
 Green y (slider, value range 0.400 ~ 0.750 [0.656])
 Blue x (slider, value range 0.050 ~ 0.250 [0 .13 8 ])
 Blue y (slider, value range 0.000 ~ 0.120 [0.042])
 White x (slider, value range 0.200 ~ 0.400 [0.2 91])
 White y (slider, value range 0.250 ~ 0.450 [0.334])
Target MCY Gamut
 Magenta x (slider, value range 0.200 ~ 0.500 [0.000])
 Magenta y (slider, value range 0.050 ~ 0.250 [0.000])
 Cyan x (slider, value range 0.125 ~ 0.325 [0.000])
 Cyan y (slider, value range 0.225 ~ 0.425 [0.000])
 Yellow x (slider, value range 0.300 ~ 0.500 [0.000])
 Yellow y (slider, value range 0.400 ~ 0.600 [0.000])
Reset (command)
Red Lift (slider, value range 0 ~ 200 [10 0])
Green Lift (slider, value range 0 ~ 200 [10 0])
Blue Lift (slider, value range 0 ~ 200 [10 0])
Red Gain (slider, value range 0 ~ 200 [10 0])
Green Gain (slider, value range 0 ~ 200 [10 0])
Blue Gain (slider, value range 0 ~ 200 [10 0])
Notes
 Some of the information in this menu 
map is summarised. See the actual 
menu on the projector for full details.
 The underlined text  represents 
the factory default value for each 
setting.
   
Digital Projection HIGHlite Laser 3D Series 
Rev C Februar y 2015  
						

							page 109
Reference Guide
APPENDIX D: MENU MAP
Menu Sub Menus
GEOMETRY
Aspect Ratio 16:9, TheaterScope, 4:3, 4:3 Narrow, 16:10, 5:4, Source
Overscan Off, Crop, Zoom
Keystone
Horizontal Keystone (slider, value range -350 ~ 350 [0])
Vertical Keystone (slider, value range -200 ~ 200 [0])
Rotation
Rotation Adjust (slider, value range -20 ~ 20 [0])
Pincushion / Barrel
Pincushion / Barrel Adjust (slider, value range -100 ~ 100 [0])
Top Left Corner
Top Left Corner Adjust
 Horizontal (slider, value range -192 ~ 192 [0])
 Vertical (slider, value range -120 ~ 120 [0])
Top Right Corner
Top Right Corner Adjust
 Horizontal (slider, value range -192 ~ 192 [0])
 Vertical (slider, value range -120 ~ 120 [0])
Bottom Left Corner
Bottom Left Corner Adjust
 Horizontal (slider, value range -192 ~ 192 [0])
 Vertical (slider, value range -120 ~ 120 [0])
Bottom Right Corner
Bottom Right Corner Adjust
 Horizontal (slider, value range -192 ~ 192 [0])
 Vertical (slider, value range -120 ~ 120 [0])
Reset (command)
Blanking
Top (slider, value range -360 ~ 360 [0])
Bottom (slider, value range -360 ~ 360 [0])
Left (slider, value range -534 ~ 534 [0])
Right (slider, value range -534 ~ 534 [0])
Reset (command)
Notes
 Some of the information in this menu 
map is summarised. See the actual 
menu on the projector for full details.
 The underlined text  represents 
the factory default value for each 
setting.
   
Digital Projection HIGHlite Laser 3D Series 
Rev C Februar y 2015  
						

							page 110
Reference Guide
APPENDIX D: MENU MAP
Menu Sub Menus
EDGE BLEND
Edge Blend Off, On
Align Pattern Off, On
Blend Width
To p (slider, value range 0, 200 ~ 500)
Bottom (slider, value range 0, 200 ~ 500)
Left (slider, value range 0, 200 ~ 800)
Right (slider, value range 0, 200 ~ 800)
Black Level Uplift
To p 0, 8, 16, 24, 32
Bottom 0, 8, 16, 24, 32
Left 0, 8, 16, 24, 32
Right 0, 8, 16, 24, 32
All (slider, value range 0 ~ 32 [0])
Red (slider, value range 0 ~ 32 [0])
Green (slider, value range 0 ~ 32 [0])
Blue (slider, value range 0 ~ 32 [0])
Reset (command)
3D
3D Format Off, Auto, Side by Side (Half), Top and Bottom, Dual-Pipe 
3D Swap Normal, Reverse
Dark Time 0.65 ms, 1.3 ms, 1.95 ms, 2.5 ms
Sync Offset (slider, value range 0~ 200 [100])
LASER
Power Mode Eco, Normal, Custom, Quiet
Custom Power Level (slider, value range 1~ 28 [28])
High Altitude Off, On
Laser Status (information only)
Laser Hours (information only)
Notes
 Some of the information in this menu 
map is summarised. See the actual 
menu on the projector for full details.
 The underlined text  represents 
the factory default value for each 
setting.
   
Digital Projection HIGHlite Laser 3D Series 
Rev C Februar y 2015  
						

							page 111
Reference Guide
APPENDIX D: MENU MAP
Menu Sub Menus 
SETUP
Orientation Desktop Front, Ceiling Front, Desktop Rear, Ceiling Rear
Auto Power Off Off, On
Auto Power On Off, On
Startup Logo Off, On
Blank Screen Logo, Black, Blue, White
Trigger 1 Screen, 16:9, TheaterScope, 4:3, 4:3 Narrow, RS232
Trigger 2 Screen, 16:9, TheaterScope, 4:3, 4:3 Narrow, RS232
Auto-Source Off, On
Infrared Remote
IR Enable Off, On
IR Code (numeric input, two digits)
IR Code Reset (command)
Network
DHCP Off, On
IP Address (numeric input, IP address format)
Subnet Mask (numeric input, IP address format)
Gateway (numeric input, IP address format)
DNS (numeric input, IP address format)
Apply Settings (command)
Standby Power Off, On
LAN Status (informatiojn only)
MAC (information only)
On Screen Display
Position Top-Left, Top-Right, Bottom-Left, Bottom-Right, Center
Transparency 0%, 25%, 50%, 75%
Timeout Always On, 10 Seconds, 30 Seconds, 60 Seconds
Messaging Off, On
Presets
Recall Preset Preset A, Preset B, Preset C, Preset D, Default
Save Preset Preset A, Preset B, Preset C, Preset D
Notes
 Some of the information in this menu 
map is summarised. See the actual 
menu on the projector for full details.
 The underlined text  represents 
the factory default value for each 
setting.
   
Digital Projection HIGHlite Laser 3D Series 
Rev C Februar y 2015  
						

							page 112
Reference Guide
APPENDIX D: MENU MAP
Menu Sub Menus 
INFORMATION
Model Name (information only)
Serial Number (information only)
Software Version 1 (information only)
Software Version 2 (information only)
FPGA Version (information only)
Active Source (information only)
Signal Format (information only)
Laser Hours (information only)
Factory Reset (command, opens a confirmation dialog)
Notes
 Some of the information in this menu 
map is summarised. See the actual 
menu on the projector for full details.
 The underlined text  represents 
the factory default value for each 
setting.
  Do NOT reset the settings unless 
you are sure that you want to restore 
ALL the current settings to their 
factory defaults.
   
Digital Projection HIGHlite Laser 3D Series 
Rev C Februar y 2015