Digital Projection Projector E-vision Series User Manual

							— 32 — 
Audio 
Press the Menu button to open the OSD menu. Press â—„â–º to move to the Settings 1 menu. 
Press ▼▲ to move to the Audio menu and then press Enter or ►. Press ▼▲ to move up and 
down in the Audio menu. 
 
ITEM DESCRIPTION 
Volume Press the cursor â—„â–º button to enter and adjust the audio volume.  
Mute Press the cursor â—„â–º button to enter and turn on or off the speaker. 
  
						

							– 33 – 
Advanced 1 Feature 
Press the Menu button to open the OSD menu. Press â—„â–º to move to the Settings 1 menu. 
Press ▲▼ to move to the Advanced 1 menu and then press Enter or ►. Press ▲▼ to move up 
and down in the Advanced 1 menu. Press â—„â–º to enter and change values for setting. 
 
ITEM DESCRIPTION 
Language Press the cursor â—„â–º button to enter and select a different localization Menu. 
Security Lock  Press the cursor â—„â–º button to enter and enable or disable security lock functionK 
Blank Screen Press the cursor â—„â–º button to enter and select different color to blank the screenK 
Splash Logo Press the cursor â—„â–º button to enter and select splash logo on or offK 
Closed Captioning Press the cursor â—„â–º button to enter and enable or disable Closed Captioning 
Keypad Lock Press the cursor â—„â–º button to enter and enable or disable keys can be work on 
keypadK 
3D Setting Press  EEnter) / â–º to enter the 3D menu. See page 34 for more information on 3D 
Setting. 
Screen Capture Press  (Enter) / â–º to capture screen, and please wait saving pictureK 
Picture will auto showing after next power on. 
Note:  
To enjoy the 3D function, first enable the Play Movie in 3D setting found in your DVD device under 
the 3D Disc Menu. 
    
						

							— 34 — 
3D Setting 
 
ITEM DESCRIPTION 
3D Press the cursor â—„â–º button to enter and select different 3D modeK 
3D Sync Invert Press the cursor â—„â–º button to enter and enable or disable 3D Sync InvertK 
3D Format Press the cursor â—„â–º button to enter and enable or disable different 3D Format. 
 
Note: 
1. The 3D OSD menu item is gray if there is no appropriate 3D source. This is the default setting. 
2. When the projector is connected to an appropriate 3D source, the 3D OSD menu item is enabled 
for selection. 
3. Use 3D glasses to view a 3D image. 
4. You need 3D content from a 3D DVD or 3D media file. 
5. You need to enable the 3D source (some 3D DVD content may have a 3D on-off selection 
feature). 
6. You need DLP link 3D or IR 3D shutter glasses. With IR 3D shutter glasses, you need to install a 
driver on your PC and connect a USB emitter. 
7. The 3D mode of the OSD needs to match the type of glasses (DLP link or IR 3D). 
8. Power on the glasses. Glasses normally have a power on -off switch.  
Each type of glasses has their own configuration instructions. Please follow the configuration 
instructions that come with your glasses to finish the setup process. 
 
Note:  
Since different types of glass (DLP link or IR shutter glass) have their own setting instructions, 
Please follow the guide to finish the setup process.  
						

							– 35 – 
Advanced 2 Feature 
Press the Menu button to open the OSD menu. Press â—„â–º to move to the Settings 1 menu. 
Press ▲▼ to move to the Advanced 2 menu and then press Enter or ►. Press ▲▼ to move up 
and down in the Advanced 2 menu. Press â—„â–º to enter and change values for setting. 
 
ITEM DESCRIPTION 
Test Pattern Press the cursor â—„â–º button to enter and select internal test patternK 
H Image Shift Press the cursor â—„â–º button to enter and select H Image ShiftK 
V Image Shift Press the cursor â—„â–º button to enter and select V Image ShiftK 
  
						

							— 36 — 
Settings 2 Menu  
Press the MENU button to open the OSD menu. Press the cursor â—„â–º button to move to the 
Settings 2 menu. Press the cursor ▲▼ button to move up and down in the Settings 2 menu.  
 
ITEM DESCRIPTION 
Auto Source Press the cursor â—„â–º button to enter and enable or disable automatic source 
detection.  
No Singal Power 
Off (min.) 
Press the cursor â—„â–º button to enter and enable or disable automatic shutdown of 
lamp when no signal.  
Auto Power On Press the cursor â—„â–º button to enter and enable or disable automatic power On when 
AC power is suppliedK 
Lamp Mode Press the cursor â—„â–º button to enter and select the lamp mode for higher brightness 
or lower brightness to save lamp lifeK 
Reset All Press  (EnterF / â–º to reset all settings to default values. 
Status Press  (Enter) / â–º to enter the Status menu. See page 37 for more information on 
Status. 
Advanced 1 Press  (Enter) / â–º to enter the Advanced N menu. See Advanced 1 Feature on 
page 38. 
Advanced 2 Press  (Enter) / â–º to enter the Advanced 2 menu. See Advanced 2 Feature on 
page 50.      
						

							– 37 – 
Status 
Press the cursor ▲▼ button to move up and down in the Settings 2 menu. Select the Status 
menu and press Enter or â–º to enter. 
 
ITEM DESCRIPTION 
Active Source Display the activated source. 
Video Information Displays resolution/video information for RGB source and color standard for Video 
source. 
Lamp Hours Lamp hour used information is displayed. (ECO, Normal, Abnormal ) 
Software Version Showing system software version. 
Serial Number Showing serial number of this projector. 
  
						

							— 38 — 
Advanced 1 Feature 
Press the Menu button to open the OSD menu. Press â—„â–º to move to the Settings 2 menu. 
Press ▲▼ to move to the Advanced 1 menu and then press Enter or ►. Press ▲▼ to move up 
and down in the Advanced 1 menu. Press â—„â–º to enter and change values for setting. 
 
ITEM DESCRIPTION 
Menu Position Press the cursor â—„â–º button to enter and select different OSD location. 
Translucent Menu Press the cursor â—„â–º button to enter and select OSD background translucent level.  
Low Power Mode Press the cursor â—„â–º button to enter and turn Low Power Mode on or off. 
Fan Speed 
Press the cursor â—„â–º button to enter and toggle between Normal and High fan speeds.  
Note: We recommend selecting high speed in high temperatures, high humidity, or 
high altitude (higher than 1500m/4921ft) areas. 
Lamp Hour Reset After replacing the lamp, this item should be reset. See page 39 for more information 
on Lamp Hour Reset. 
Projector ID  Press the cursor â—„â–º button to enter and adjust a two digit projector ID from M0 
through V8K 
Network Press  (Enter) / â–º to enter the Network menu. See page 39 for more information on 
Network. 
Projection Angle 
Caution Press the cursor â—„â–º button to enter and turn Projection Angle Caution on or off. 
   
						

							– 39 – 
Lamp Hour Reset 
 
Please refer to Resetting the Lamp on page 57 to reset the lamp hour counter. 
Network 
 
ITEM DESCRIPTION 
Network State Displays the network connection status. 
DHCP 
Press the cursor â—„â–º button to turn DHCP On or Off.  
Note: If you select DHCP Off, complete the IP Address, Subnet Mask, Gateway, 
and DNS fields. 
IP Address  Enter a valid IP address if DHCP is turned off. 
Subnet Mask Enter a valid Subnet Mask if DHCP is turned off. 
Gateway Enter a valid Gateway address if DHCP is turned off. 
DNS Enter a valid DNS name if DHCP is turned off. 
Apply Press  (Enter) / â–º to confirm settings. 
 
   
						

							— 40 — 
LAN_RJ45 
 
Wired LAN Terminal functionalites 
Remote control and monitoring of a projector from a PC (or Laptop) via wired LAN is also possible. 
Compatibility with Crestron / AMX (Device Discovery) / Extron control boxes enables not only 
collective projector management on a network but also management from a control panel on a PC 
(or Laptop) browser screen. 
ï‚« Crestron is a registered trademark of Crestron Electronics, Inc. of the United States. 
ï‚« Extron is a registered trademark of Extron Electronics, Inc. of the United States. 
ï‚« AMX is a registered trademark of AMX LLC of the United States. 
ï‚« PJLink applied for trademark and logo registration in Japan, the United States of America, and 
other countries by JBMIA. 
Supported External Devices 
This projector is supported by the specified commands of the Crestron Electronics controller and 
related software (ex, RoomView ® ). 
http://www.crestron.com/ 
This projector is supported by AMX ( Device Discovery ). 
http://www.amx.com/ 
This projector is compliant to support Extron device(s) for reference. 
http://www.extron.com/ 
This projector supports all commands of PJLink Class1 (Version 1.00). 
http://pjlink.jbmia.or.jp/english/ 
 
For more detail of information about the diverse types of external devices which can be connected to 
the LAN/RJ45 port and remote/control the projector, as well as the related control commands 
supporting for each external device, kindly please get contact with the Support-Service team directly.  
						

							– 41 – 
LAN_RJ45 
1. Connect an RJ45 cable to RJ45 ports on the projector and the PC (Laptop). 
 
2. On the PC (Laptop), select Start → Control Panel →Network and Internet.