Digital Projection Projector E-vision Series User Manual

							— 22 — 
Adjusting the Zoom, Focus and Keystone 
1.  Use the Image-zoom  
control (on the projector 
only) to resize the 
projected image and 
screen size. 
 
2.  Use the Image-focus  
control (on the projector 
only) to sharpen the 
projected image. 
 
3.  Use the KEYSTONE 
buttons (on the 
projector or the remote 
control) to correct 
image-trapezoid (wider 
top or bottom)  
effect. 
 Remote control and OSD panel 
4.  The keystone control  
appears on the display.  
     
						

							– 23 – 
Adjusting the Volume 
1.  Press the Volume +/-  
buttons on the remote 
control.  
The volume control  
appears on the display. 
 
 
 
2.  Press the Left or Right 
Cursor buttons on the 
keypad to adjust 
Volume +/-. 
3.  Press the MUTE button 
to turn off the volume 
(This feature is 
available only on the 
remote).  
    
						

							— 24 — 
ON-SCREEN DISPLAY (OSD) MENU SETTINGS 
OSD Menu Controls 
The projector has an OSD that lets you make image adjustments and change various settings.  
Navigating the OSD 
You can use the remote control cursor buttons or the buttons on the top of the projector to 
navigate and make changes to the OSD. The following illustration shows the corresponding 
buttons on the projector. 
 
1. To enter the OSD, press the MENU 
button.  
2. There are three menus. Press the cursor 
◄► button to move through the menus.  
3. Press the cursor ▲▼ button to move up 
and don in a menu.  
4. Press ◄► to change values for settings. 
5. Press MENU to close the OSD or leave 
a submenu. 
 
Note: 
Depending on the video source, not all items in the OSD are available. For example, the 
Horizontal/Vertical Position items in the Computer menu can only be modified when 
connected to a PC. Items that are not available cannot be accessed and are grayed out.  13
16
5
2
7
2
4
1
1
3
4
5
6
7  
						

							– 25 – 
Setting the OSD Language 
Set the OSD language to your preference before continuing. 
1. Press the MENU button. Press the cursor ◄► button to navigate to Settings 1. Press 
the cursor ▲▼ button to move to the Advanced 1 menu. 
 
2. Press  (Enter) / ► to enter the Advanced 1 sub menu. Press the cursor ▲▼ button 
until Language is highlighted.  
 
3. Press the cursor button until the language you want is highlighted.  
4. Press the MENU button four times to close the OSD.     
						

							— 26 — 
OSD Menu Overview 
Use the following illustration to quickly find a setting or determine the range for a setting. 
 Image
Settings 1
Off, On
Blank, Red, Green, Blue, White
Off, On
Off, On
3D
3D Sync Invert
3D Format
Hue
Saturation
English, Français, Español, Deutsch, Português, 簡体中文, 繁體中文, Italiano, 
Svenska, Nederlands, Suomi, Ελληνικά, Norsk, Polski, Русский, 한국어, 日本語, 

            , Magyar,    , Türkçe, Čeština, Việt,          ,          
Off, On
Gain
1.8, 2.0, 2.2, 2.4, B&W, Linear
Warm, Normal, Cold
Off, On
Hue
Saturation
Gain
Hue
Saturation
Gain
Hue
Saturation
Gain
Hue
Saturation
Gain
Hue
Saturation
Gain
Red
Green
Blue
Reference Input Source Select (IR/Keypad)
Off, On
None, Grid, White, Red, Green, Blue, Black
Settings 2
Center, Down, Up, Left, Right
0%, 25%, 50%, 75%, 100%
Off, Low Power, Power On by LAN, VGA Out
00-98
Normal, High
Display Mode
Brightness
Auto Image
Computer
Contrast
Advanced
Color Manager
Source
Aspect Ratio
Projection
Audio
Digital Zoom
Keystone
Advanced 1
Advanced 2
Auto Source
Auto Power On
No Signal Power Off
Status
Reset All
Lamp Mode
Advanced 1
Advanced 2
Volume
Security Lock
Blank Screen
Splash Logo
Keypad Lock
3D Setting
Horizontal Position
Vertical Position
Frequency
Tracking
Red
Language
Closed Captioning
Brilliant Color
Sharpness
Gamma
Color Temperature
Video AGC
Video Saturation
Video Tint
Green
Blue
Cyan
Magenta
Yellow
White
Source
Mute
Test Pattern
H Image Shift
V Image Shift
Off, On
Menu Position
Translucent Menu
Low Power Mode
Lamp Hour Reset
Projector ID
Fan Speed
Off, On
Sleep Timer
Source Filter
ECO , Normal
DVI
HDMI
DisplayPort
VGA1
VGA2
Normal, Rear, Ceiling, Rear+Ceiling
Fill, 4:3, 16:9, Letter Box, Native, 2.35:1
Presentation, Bright, Game, Movie, TV, sRGB, BlackBoard, User1, User2
Off, On
Frame Sequential, Top/Bottom, Side-By-Side, Frame 
Packing (3D FramePacking HDMI source only)
Off, DLP-Link, IR
Disable, Enable
Disable, Enable
Disable, Enable
Disable, Enable
Disable, Enable
Auto SyncOff, On
BNC
Component Video
S-Video
Composite Video
Disable, Enable
Disable, Enable
Disable, Enable
Disable, Enable
 Active Source
Video Information
Lamp Hours(ECO , Normal, Abnormal)
Serial Number
 Software Version
Network StateNetwork
DHCP
 IP Address
Subnet Mask
Gateway
DNS
Apply
Connect, Disconnect
Off, On
0~255, 0~255, 0~255, 0~255
0~255, 0~255, 0~255, 0~255
0~255, 0~255, 0~255, 0~255
0~255, 0~255, 0~255, 0~255
OK / Cancel
Screen Capture
Projection Angle CautionOff, On  
						

							– 27 – 
Image Menu  
Attention !   
All of display mode parameters when changed will be saved to user mode.  
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the 
Image Menu. Press the cursor ▲▼ button to move up and down in the Image menu. Press ◄► 
to enter and change values for settings. 
 
ITEM DESCRIPTION 
Display Mode Press the cursor ◄► button to enter and set the Display Mode.  
Brightness Press the cursor ◄► button to enter and adjust the display brightnessK 
Contrast Press the cursor ◄► button to enter and adjust the display contrastK 
Computer Press  (Enter) / ► to enter the Computer menu. See Computer Menu on page 28. 
Auto Image Press  (Enter) / ► to automatically adjustment for phase, tracking, size and 
positionK 
Advanced Press  (Enter) / ► to enter the Advanced menu. See Advanced Feature on page 
29. 
Color Manager Press  (Enter) / ► to enter the color manager menu. See page 30 for more 
information on Color Manager.      
						

							— 28 — 
Computer Menu 
Press the MENU button to open the OSD menu. Press ◄► to move to the Image menu. Press 
▲▼ to move to the Computer menu and then press Enter or ►. Press ▲▼ to move up and 
down in the Computer menu. 
 
ITEM DESCRIPTION 
Horizontal Position Press the cursor ◄► button to enter and adjust the display position to left or right.  
Vertical Position Press the cursor ◄► button to enter and adjust the display position to up or down.  
Frequency Press the cursor ◄► button to enter and adjust the A/D sampling clock. 
Tracking Press the cursor ◄► button to enter and adjust the A/D sampling dot. 
Auto Sync Press the cursor ◄► button to enter and enable or disable the autolock control for 
RGB source. 
  
						

							– 29 – 
Advanced Feature 
Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press 
▼▲ to move to the Advanced menu and then press Enter or ►. Press ▼▲ to move up and 
down in the Advanced menu. 
 
ITEM DESCRIPTION 
Brilliant Color Press the cursor ◄► button to enter and adjust the Brilliant Color valueK 
Sharpness Press the cursor ◄► button to enter and adjust the display sharpnessK 
Gamm~ Press the cursor ◄► button to enter and adjust the gamma correction of the displayK 
Color Temperature Press the cursor ◄► button to enter and adjust the color temperatureK 
Video AGC Press the cursor ◄► button to enter and enable or disable the Automatic Gain Control 
for video sourceK 
Video Saturation Press the cursor ◄► button to enter and adjust the video saturation. 
Video Tint Press the cursor ◄► button to enter and adjust the video tint/hue. 
  
						

							— 30 — 
Color Manager 
Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press 
▼▲ to move to the Color Manager menu and then press Enter or ►. Press ▼▲ to move up and 
down in the Color Manager menu.  
 
ITEM DESCRIPTION 
Red Select to enter the Red Color Manager.  
Press the ◄► buttons to adjust the Hue, Saturation, and Gain. 
Green Select to enter the Green Color Manager.  
Press the ◄► buttons to adjust the Hue, Saturation, and Gain. 
Blue Select to enter the Blue Color Manager.  
Press the ◄► buttons to adjust the Hue, Saturation, and Gain. 
Cyan Select to enter the Cyan Color Manager.  
Press the ◄► buttons to adjust the Hue, Saturation, and GainK 
Magent~ Select to enter the Magenta Color Manager.  
Press the ◄► buttons to adjust the Hue, Saturation, and Gain. 
Yellow Select to enter the Yellow Color Manager.  
Press the◄► buttons to adjust the Hue, Saturation, and Gain. 
White Select to enter the White Color Manager.  
Press the ◄► buttons to adjust the Red, Green, and BlueK 
 
  
						

							– 31 – 
Settings 1 Menu  
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the 
Settings 1 menu. Press the cursor ▲▼ button to move up and down in the Settings 1 menu. 
Press ◄► to enter and change values for settings. 
 
ITEM DESCRIPTION 
Source Press  (Enter) / ► to enter the Source menuK oeference input Source select 
(Io L Keypad). 
Projection Press the cursor ◄► button to enter and choose from four projection methods: 
Aspect Ratio Press the cursor ◄► button to enter and adjust the video aspect ratio. 
Keystone Press the cursor ◄► button to enter and adjust the display keystone. 
Digital Zoom  Press the cursor ◄► button to enter and adjust the Digital Zoom menu.  
Audio Press  (EnterF / ► to enter the Audio menu. See Audio on page 32. 
Advanced 1 Press  (Enter) / ► to enter the Advanced 1 menu. See Advanced 1 Feature on 
page 33. 
Advanced 2 Press  (Enter) / ► to enter the Advanced 2 menu. See Advanced 2 Feature on 
page 35.