Home > Digital Projection > Projector > Digital Projection Projector E-Vision 8000 User Manual

Digital Projection Projector E-Vision 8000 User Manual

Here you can view all the pages of manual Digital Projection Projector E-Vision 8000 User Manual. The Digital Projection manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 51

Digital Projection E-Vision 8000 series  MENU MAP Operating Guide
Page Op_23
LAMPS
Mode  Dual, Single
Power  Normal, Custom Power, Eco
High Altitude  Off, On
Custom Power  80-100%
Lamp Status  Information Only: Lamp 1 On, Off     Lamp 2 On, Off
Lamp Time  Information Only: Lamp 1 Hrs     Lamp 2 Hrs
 ALIGNMENT
Rear Projection  Off, On
Ceiling Mode  Off, On
Lens Control  Shift, Zoom/Focus
Lens Memory 
Load Memory  Memory 1-10
Save Memory  Memory 1-10
Center Lens  Press ENTER to execute
Warp
Keystone...

Page 52

Digital Projection E-Vision 8000 series  MENU MAP Operating Guide
Page Op_24
CONTROL
IR Address   1,2
Eco Network Power   Standard, Eco
Auto Power Off   On, Off
Auto Power On   On, Off
Projector Control   RS232, Network
Network   Information only: IP Address, Subnet Mask, Gateway, DHCP
Startup Logo   On, Off
Trigger   Auto, 5:4, 4:3, 16:10, 16:9, 1.88, 2.35, Letterbox, Native, Unscaled
Auto Search   On, Off
Dynamic Black   On, Off
Language   Select from list
SERVICE
Information only:  Model, Serial...

Page 53

Digital Projection E-Vision 8000 series  LAN IP CONFIGURATION UTILITY Operating Guide
Page Op_25
LAN IP Configuration Utility
LAN IP configuration can be carried out using a web browser:
• Point your browser at the projector by typing the LAN IP Address into the address bar, 
then press the Enter key.
• The embedded IP Configuration webpage should appear.
• Make the settings as required, then click on Save.
Notes
 Eco Network Power must be set to 
Standard, if you wish to control the 
projector via the...

Page 54

E-Vision 8000 Series
High Brightness Digital Video Projector
REMOTE COMMUNICATIONS GUIDE
BOOK CONTENTS
REMOTE COMMUNICATIONS 
GUIDE
Introduction
Examples
The Operation Commands
INPUT menu
PICTURE menu
LAMPS menu
ALIGNMENT menu
Rev A     April 2012  

Page 55

Digital Projection E-Vision 8000 series  CONTENTS Remote Communications Guide
CONTENTS
Introduction ........................................................................\
...................Rem_1
Examples..............................................................................................Rem_1
The Operation Commands ...........................................................Rem_2
INPUT menu .........................................................................................Rem_2
PICTURE...

Page 56

Digital Projection E-Vision 8000 series  INTRODUCTION Remote Communications Guide
Page Rem_1
Introduction
The projector can be controlled by using an external control system or a PC via a LAN or RS232 serial interface, using a terminal-emulation 
program, such as HyperTerminal.
Operation commands are used to simulate menu operations and determine th\
e settings of the projector, and use the following format:
• All commands consist of ascii text strings starting with the letters ‘op’, and ending with an...

Page 57

Digital Projection E-Vision 8000 series  THE OPERATION COMMANDS Remote Communications Guide
Page Rem_2
The Operation Commands
Notes
INPUT menu
input.sel= ?0 = HDMI
1 = DVI
2 = RGB D-15
3 = RGBHV/YUV
4 = Composite Video
5 = S-Video
6 = SDI/HDSDI/3G
7 = Option Board
pip= ?0 = Off
1 = On
pip.pos= ?0 = Top left
1 = Top right
2 = Bottom left
3 = Bottom right
4 = Split L-R
pip.pos= ?1 = HDMI
2 = DVI
3 = RGB D-15
4 = RGBHV/YUV
5 = Composite Video
6 = S-Video
7 = SDI/HDSDI/3G
8 = Option Board
continued on next...

Page 58

Digital Projection E-Vision 8000 series  THE OPERATION COMMANDS Remote Communications Guide
Page Rem_3
...continued from previous page
Notes
pattern= ?0 = White
1 = Black
2 = Red
3 = Green
4 = Blue
5 = Cyan
6 = Magenta
7 = Yellow
8  = ANSI
9 = H-Ramp
10 = Grid
11 = Off
Color.space2= ?0  = Auto
1 = YUV HD
2 = YUV STD
3 = RGB-PC (0-255)
4 = RGB-Video (16-235)
color.space= ?0 = Native
1 = EBU
2 = SMPTE
3 = Custom
input.lock= ?0  = Auto
1 = 48 Hz
2 = 50 Hz
3 = 60 Hz
no.signal= ?0 = Logo
1 = Blue
2 = Black
3...

Page 59

Digital Projection E-Vision 8000 series  THE OPERATION COMMANDS Remote Communications Guide
Page Rem_4
...continued from previous page
Notes
PICTURE menu
contrast= ? + -0 - 200
dyna.cont= ?0 = Off
1 = On
brightness= ? + -0 - 200
saturation= ? + -0 - 200
tint= ? + -0 - 200Hue
gamma= ?0 = Film
1 = Graphics
2 = Video
3 = Linear
sharpness= ? + -0 - 200
nr= ? + -0 - 200
pic.mode= ?0 = High Bright
1 = Presentation
2 = Video
Display Mode
color.temp= ?0 = 5000K
1 = 6500K
2 = 7800K
3 = 9300K
4 = Native...

Page 60

Digital Projection E-Vision 8000 series  THE OPERATION COMMANDS Remote Communications Guide
Page Rem_5
...continued from previous page
Notes
aspect= ?0 = 5:4
1 = 4:3
2 = 16:10
3 = 16:9
4 = 1.88
5 = 2.35
6 = Letterbox
7 = Native
8 = Unscaled
zoom= ?0 = Off 
1 = Crop 
2 = Zoom
Overscan
h.total= ? + -0-200
h.pos= ? + -0-200
h.phase= ? + -0-200
v.pos= ? + -0-200
auto.img(execute)
LAMPS menu
lamps= ?0 = Single
1 = Dual
lamp.mode= ?0 = Economy
1 = Standard
2 = Dimming
altitude= ?0 = Off
1 = On
High Altitude...
Start reading Digital Projection Projector E-Vision 8000 User Manual

Related Manuals for Digital Projection Projector E-Vision 8000 User Manual

All Digital Projection manuals