Dell Sx2210t Users Guide

 
Display setting mode 
submenu   
   
 
 
Back  
Press the   button to go back to the main menu.  
    Horizontal  position  
Use the   and   buttons to adjust image left and right (min 0 ~ max 100).   
NOTE:  When using DVI or HDMI source, the Horizontal Position setting is not available.   
    Vertical Position  
Use the   and   buttons to adjust image up and down (min 0 ~ max 100).   
NOTE:  When using DVI or HDMI source, the Vertical Position setting is not available.   
    Pixel Clock   T he...

  Audio Setting mode 
submenu 
 
Line Out Source Select the source of the audio input. 
  Power Save Audio
Allows you to turn on or off the power to the audio during the audio power save mode.  
Default is On.  
On   —   Allows you to turn off the line - out to the sound bar during monitor standby.  
Off   —   Allows you to turn on the line - out to the sound bar during monitor standby.   
 
Reset Audio Setting   Resets your monitor audio settings to the factory defaults.
    Exit Menu  
Press the...

 
DDC/CI     DDC/CI (Display Data Channel/Command Interface) allows a software on your computer to adjust the monitor display settings like 
the brightness, color balance etc.  
Enable  (Default): Optimizes the performance of your monitor and provides a better customer experience.  
Disable : Disables the DDC/CI option and the following message appears on the screen.  
   
 
 
Select  Yes  to disable DDC/CI or  No  to return.  
 
LCD Conditioning   LCD conditioning helps eliminate any image retention and...

OSD Warning Messages    Personalize  
Allows you to adjust shortcut button for: 1. Brightness & Contrast and 2. Preset Modes.  
The following warning messages may appear on the screen to indicate that the monitor is out of synchronization.
 
 
 
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. Either the signal is too high or too low 
for the monitor to use. See  Specifications  for the Horizontal and Vertical frequency ranges addressable by this...

See  Solving Problem  
s  for more information.  
Setting the Maximum Resolution  
To set the maximum resolution for the monitor:  
1. Right - click on the desktop and select  Properties .   
2. Select the  Settings  tab.   
3. Set the screen resolution to 1920 x 1080.   
4. Click  OK .   
If you do not see 1920 x 1080 as an option, you may need to update your graphics driver. Depending on your computer, complete one of the following 
procedures:  
l If you have a Dell desktop or portable computer: 
Go...

The Dell Soundbar is a stereo two channel system, mountable on Dell Flat Panel Displays. The Soundbar has a rotary volume and on/off control to adjust the 
overall system level, a LED for power indication, and two audio headset jacks.  
 
Using the Tilt  
Tilt  
With the built - in stand, you can tilt the monitor for the most comfortable viewing angle.  
 1. Attach mechanism 
2.   Headphone connectors 
Power indicator 
4.   Power/Volume control
NOTE:  The stand is attached when the monitor is shipped...

Using the Camera   
Installing the Dell TouchCam Software (Microsoft   Windows   Operating Systems)  
The Dell SX2210T  webcam application media that shipped with your monitor, allows you to install the software and drivers for the integrated webcam.   
To install the  Dell TouchCam Software :  
You are now ready to use the Webcam.  
Using the TouchCam Software  
Stand - alone mode  
Stand - alone mode can be launched from the start menu.  
 
IM mode  
   
IM mode will launch itself automatically when an...

 
When a video session ends, the TouchCam software will return to stand - alone mode.  
Setting up TouchCam in instant messaging programs  
The following describes the setup procedures for Windows Live Messenger.  
1. Click  Tool Audio and video setup...  
   
2. Select  Dell Web Camera Filter .   

   
Similar setup steps can be performed in other IM programs.  
Installing and Using the Facial Recognition Software (FastAccess)    
Installing the Facial Recognition Software (FastAccess) (Windows Vista and Window 7 Operating Systems Only )  
To install the  Facial Recognition Software (FastAccess) :
You are now ready to use the Facial Recognition Software.  
First Use  
1. From the Start Menu; click Start All Programs FastAccess Configure FastAccess.     
2. Follow the on - screen setup wizard to...

OK button : This button closes the Console and saves all changes.    
Cancel button : This button closes the Console without saving any changes.  
Choosing the Desired Webcam for Face Recognition  
l Automatic Webcam Selection:  Automatic Webcam Selection simplifies operation if more than one webcam is installed on your computer. FastAccess 
connects to a Dell Monitor webcam first.   
l Manual Webcam Selection:  Your desired webcam can be selected by opening the FastAccess Configuration Console and...