Dell Sx2210t Users Guide

							 
Notes, Notices, and Cautions  
Information in this document is subject to change without notice.  
 
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.   is strictly forbidden.  
Trademarks used in this text:  DELL and  the  DELL  logo are trademarks of Dell Inc;   Microsoft, Windows,   and  Windows Vista  are either registered trademarks or trademarks of 
Microsoft Corporation in the United States and/or other countries;  ENERGY STAR  is a registered trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR partner, 
Dell Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.  
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any 
proprietary interest in trademarks and trade names other than its own.  
Model SX2210Tb   
 
   
   About Your Monitor  
Setting Up the Monitor  
Operating the Monitor  
Troubleshooting   
Appendix  
 
NOTE:  A NOTE indicates important information that helps you make better use of your computer.
NOTICE:  A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
  CAUTION:  A CAUTION indicates a potential for property damage, personal injury, or death.  
						

							   
Back to Contents Page    
About Your Monitor   
SX2210T  Flat Panel Monitor Users Guide  
Package Contents  
Your monitor comes with all the items shown below. Ensure that you have all the items. If something is missing,  contact Dell .   
    Package Contents
Product Features
Identifying Parts and Controls
Monitor Specifications
Universal Serial Bus (USB) Interface
Plug and Play Capability
Camera  -  MIC Specifications
Maintenance Guidelines
NOTE:  Some items may be optional and may not ship with your monitor. Some features or media may not be available in certain 
countries.
 
    l Monitor with stand  
  l Power cable   
  l Power adapter   
  l VGA cable     
						

							   
Product Features  
The  SX2210T  flat panel display has an active matrix, thin - film transistor (TFT), liquid crystal display (LCD). The monitor features include:  
■  21.5 inches (546.8 mm) diagonal.   
■  1920 X 1080 resolution, plus full - screen support for lower resolutions.   
■  Touch sensitive — detects your finger or any other pointing device close to the screen.  
■  Tilt adjustment capability.   
■  Plug and play capability if supported by your system.   
■  On - Screen Display (OSD) adjustments for ease of set - up and screen optimization.   
■  Software and documentation media which includes an information file (INF), Image Color Matching File (ICM), Touch Screen Tools software, Webcam 
Software, Facial Recognition Software, and product documentation.   
■  Energy Saver feature for Energy Star compliance.   
■  Security lock slot.   
■  2.0 Mega pixel internal webcam with integrated microphone.   
Identifying Parts and Controls  
Front View     l DVI cable   
  l USB up stream cable (enables USB ports, Webcam and 
touch function on the monitor)   
l Documentation (Safety Information, Quick Start Guide, 
and CD)   
l Cleaning cloth     
						

							Back View  
Side View   Front View  
Label Description
1 - 2  Shortcut keys (for more information, see  Operating the Monitor ) 
*The default settings are  Preset Modes select and Brightness/Contrast select .  
1 Preset Modes select
2 Brightness/Contrast select
3  OSD menu select
4  EXIT
5 Power button (with light indicator)
6 Webcam
7 Microphone
 
Back view   Back View with monitor stand  
Label Description Use
1 Barcode serial number label T o contact Dell for technical support.
2 Security lock slot T o help secure your monitor.
3 Dell soundbar mounting brackets To attach the optional Dell Soundbar.
4 USB downstream port To connect the USB cable.
5 Regulatory rating label Lists the regulatory approvals.
6 Cable management slot T o organize cables by placing them through the slot.
   
						

							Bottom View  
Monitor Specifications  
The following sections give you information about the various power management modes and pin assignments for various connectors of your monitor.   
Power Management Modes  
If you have VESAs compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This 
is referred to as  Power Save Mode . If the computer detects input from keyboard, mouse, or other input devices, the monitor automatically resumes functioning. 
The following table shows the power consumption and signaling of this automatic power saving feature:    
 
    Right view  
 
Bottom view  
Label Description
1 DC power cord connector
2 Audio Line - in
3 Audio Line - out
4 HDMI connector
5 DVI connector
6 VGA connector
7 USB upstream connector
8 USB downstream connector
VESA Modes Horizontal Sync Vertical Sync  Video Power Indicator Power Consumption
Normal operation and 
USB active Active Active Active  White 42 W (maximum)
Normal operation Active Active Active  White 28  W (typical)
Active - off mode Inactive Inactive Blanked Amber 0.84  W
Switch off -   -   -   Off 0.74  W
  NOTE:  The OSD functions in the Normal operation mode. One of the following messages appears when the menu key is touched in Active - off mode.    
						

							Activate the computer and wake up the monitor to gain access to the  OSD .  
  Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the power adapter.  
Pin Assignments  
VGA Connector  
 
    or 
      
NOTE:  This monitor is  ENERGY STAR ® - compliant.
Pin 
Number 15 - pin Side of the Co nnected Signal Cable
1 Video - Red  
2 Video - Green
3 Video - Blue
4 GND
5 Self - test
6 GND - R
7 GND - G
8 GND - B
9 Computer 5V
10 GND - sync
11 GND
12 DDC data
13 H - sync
14 V - sync
15 DDC clock  
						

							 
 
 Pin 
Number 24 - pin Side of th e C o nnected  Signal 
Cable
1 TMDS RX2 -
2 TMDS RX2+
3 TMDS Ground
4 Floating
5 Floating
6 DDC Clock
7 DDC Data
8 Floating
9 TMDS RX1 -
10 TMDS RX1+
11 TMDS Ground
12 Floating
13 Floating
14 +5V power
15 Self test 
16 Hot Plug Detect
17 TMDS RX0 -
18 TMDS RX0+
19 TMDS Ground
20 Floating
21 Floating
22 TMDS Ground
23 TMDS Clock+
24 TMDS Clock -
Pin 
Number 19 - pin Side of th e C o nnected  Signal 
Cable
1 T.M.D.S. Data 2 -
2 T.M.D.S. Data 2 Shield
3 T.M.D.S. Data 2+ 
4 T.M.D.S. Data 1+
5 T.M.D.S. Data 1 Shield 
6 T.M.D.S. Data 1 -
7 T.M.D.S. Data 0+
8 T.M.D.S. Data 0 Shield 
9 T.M.D.S. Data 0 -
10 T.M.D.S. Clock +
11 T.M.D.S. Clock Shield 
12 T.M.D.S. Clock  -    
						

							Universal Serial Bus (USB) Interface  
This section gives you information about the USB ports that are available on the left side of your monitor.  
USB Upstream Connector  
   
USB Downstream Connector  
   
USB Ports  
l 1 upstream at bottom   
l 2 downstream at back & 1 downstream at bottom   
Camera  -  MIC Specifications  
Overview  
The integrated USB camera and analog microphones allow you to take pictures, videos, and communicate with other computer users. The camera is located at 
the top of the monitor and is fixed.  When the camera is on, the white light next to the camera turns on.  13 CEC
14 Reserved (N.C. on device) 
15 SCL
16 SDA
17 DDC/CEC Ground 
18 +5V Power 
19 Hot Plug Detect 
NOTE:   This monitor supports High - Speed Certified USB 2.0 interface
Transfer speed   Data Rate   Power Consumption
High speed  480 Mbps  2.5W (Max., each portyf
Full speed  12 Mbps  2.5W (Max., each portyf
Low speed  1.5 Mbps  2.5W (Max., each portyf
Pin Number 4 - pin Side of the connector
1 DMU
2 VCC
3 DPU
4 GND
Pin Number 4 - Pin Side of the Signal Cable
1 VCC
2 DMD
3 DPD
4 GND
NOTE:  USB 2.0 functionality requires a USB 2.0 - capable computer  
NOTE:  The monitors USB interface works only when the monitor is on or in power save mode. If you turn off the monitor and then turn it on, the attached peripherals may take a few seconds 
to resume normal functionality.   
						

							System Requirements  
The following are the minimum system requirements for the Dell Webcam Software Suite:   
l Intel ®  Pentium ®  D 3.0 or AMD ®  Athlon 64 3200+ or higher  
l Microsoft ®  Windows ®  XP Service Pack 2 or Windows Vista ®  or Windows 7    
l 512 MB RAM (1 GB RAM or higher recommended)   
l 1 GB free hard disk space   
l Graphic card Intel 945 at least (Independent graphics card recommended)    
l Available USB 2.0 port or a USB 2.0 hub with external power supply    
Dell Webcam Software Suite  
The Dell Webcam Software Suite includes the following applications:  
 
Dell TouchCam enables convenient access to all exciting applications to enhance your Dell webcam experience. See  Using the Camera  for details  
Facial Recognition Software (FastAccess)        
Face recognition technology greatly reduces the need to manually log in with passwords, while providing superior security and functionality 
compared to passwords and other biometrics (for Windows Vista ®  or Windows 7 only). See  Installing and Using the Facial Recognition Software 
(FastAccess)  for details.  
Plug and Play Capability  
You can install the monitor in any Plug and Play - compatible system. The monitor automatically provides the computer system with its Extended Display 
Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. Most monitor 
installations are automatic; you can select different settings if desired. For more information about changing the monitor settings, see  Operating the Monitor .  
Flat Panel Specifications  
*  SX2210T color gamut (typical) is based on CIE1976 (83%) and CIE1931 (72%) test standards.  Lens Field of view 66.2 degree +/ -  5 % 
Focus mode  Fixed Focus
Focus area  37 cm~Infinity 
Focusing distance (normal modeyf  1.100 mm 
Image Sensor  Active array size  2.0 mega - pixel
Video specification
    Video frame rate 1600 x 1200 (UXGA)  -  up to 10 frames per second
640 x 480 (VGA) and below  -  up to 30 frames per second
Image flip Horizontally
Audio Specification Microphone type Dual Microphone
Interface    USB 2.0 high Speed 
Screen type Active matrix  -  TFT LCD  
Panel Type TN
Screen dimensions 21.5 inches (21.5 - inch measured diagonally viewable image 
size)
Preset display area:  
Horizontal:  
Vertical:      
476.64 mm (18.76 inches)  
268.11 mm (10.56 inches)  
Pixel pitch 0.248 mm
Viewing angle 160° (verticalyfW\SLFDO
						

							Touch Screen Specifications  
   
Resolution  Specifications  
   
Video Supported Modes  
   
Preset Display Modes  
   Touch Technology Optical touch
Touch Method Finger, stylus or any pointer.
Stylus Diameter Minimum 7 mm
Capabilities Mouse functionality — click, drag, double - click and right - click
Resolution 1073 Mpixel
Accuracy +/ - 2.5 mm over 95% of touchable area (Microsoft Windows 7 
compliant) 
Touch Activation Force No pressure required
Touch Durability Unlimited
Touch Response Time Typical response time 15 ms
Glass 2.5 mm chemically toughened glass
Horizontal scan range 30 kHz to 83 kHz (automatic)
Vertical scan range 50 Hz to 76 Hz (automaticyf
Optimal preset resolution 1920 x 1080 at 60 Hz
Highest preset resolution 1920 x 1080 at 60 Hz
Video display capabilities (DVI 
playback)  480i/480p/576i/576p/720p/1080i/1080p 
(Supports HDCP)
Display Mode   Horizontal 
Frequency 
(kHz)   Vertical 
Frequency (Hz)   Pixel Clock 
(MHz)   Sync Polarity 
(Horizontal/Vertical)  
640 x 350   31.47   70.09   25.18   +/ -  
640 x  400   31.47   70.09   25.18   - / +  
640 x 480   31.47   59.94   25.17   - / -  
640 x 480   31. 50   75.00   31.5   - / -  
720 x 400  31.47  70.08  28.32  - /+ 
800 x 600  37.88  60.32  40.00  +/+ 
800 x 600  46.880  75.00  49.50  +/+ 
1024 x 768  48.36  60.00  65.00  - / -  
1024 x 768  60.02  75.03  78.75  +/+ 
1152 x 864  67.50  75.00  108.00  +/+ 
1280 x 1024  63.98  60.02  108.00  +/+ 
1280 x 1024  79.98  75.02  135.00  +/+ 
1920 x 1080 - R  66.587  59.934  138.50  +/ -  
1920 x 1080   55.62   49.92   141.50   - /+