Dell Sx2210t Users Guide

The page displays information and provides functions used for touch function technical support.  
l [Restore factory defaults] button    
Sets the Touch Screen Tools settings to factory defaults.  
l [Run diagnostics test] button    
Runs a diagnostic test on the touch screen and displays the result. For further information, see  Diagnostic Test .  
l [Calibrate] button    
Initiates the touch screen calibration procedure. See  Calibrating the Touch Screen .  
   
Back to Contents Page    

Back to Contents Page   
Setting Up Your Monitor   
 
SX2210T  Flat Panel Monitor  
Setting the display resolution to  1920 x 1080  (Maximum)  
For optimal display performance while using the Microsoft ®  Windows ®  operating systems, set the display resolution to 1920 x 1080 pixels by performing the 
following steps:  
1. Right - click on the desktop and click  Properties .  
2. Select the  Settings  tab.  
3. Move the slider - bar to the right by pressing and holding left - mouse button and adjust the...

SX2210T  
Information in this document is subject to change without notice.  
 
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.   is strictly forbidden.  
Trademarks used in this text:  DELL  and the  DELL  logo are trademarks of Dell Inc;   Microsoft, Windows,   and  Windows Vista  are either registered trademarks or trademarks of 
Microsoft Corporation in the United States and/or other countries;  ENERGY STAR  is a registered trademark of the U.S....

Back to Contents Page    
Setting Up the Monitor   
SX2210T  Flat Panel Monitor Users Guide  
   Connecting the Monitor  
   Organizing Your Cables  
   Attaching the Soundbar (Optional)  
Connecting Your Monitor  
To connect your monitor to the computer:  
1. Turn off your computer and disconnect the power cable.   
2. Connect the HDMI cable, white (digital DVI - D), or blue (analog VGA) display connector cable to the corresponding video port on the back of your 
computer. Do not use all the cables on...

 
   
Connecting the USB Cable  
After you have completed connecting the DVI/VGA/HDMI cable, follow the procedure below to connect the USB cable to the computer and complete your 
monitor setup:  
1. Connect the downstream USB connector (cable supplied) to an appropriate USB connector on your computer.   
2. Connect USB peripherals to the upstream USB connectors on the monitor.   
3. Plug the power cables for your computer and monitor into a nearby outlet.   
4. Turn on the monitor and the computer.  
If...

 
To attach the soundbar:  
Back to Contents Page  
    NOTICE:  Do not use with any device other than the Dell Soundbar. 
1.  Working from the back of the monitor, attach Soundbar by aligning the two slots with the two tabs along the bottom of the monitor.
2.  Slide the Soundbar to the left until it snaps into place.
3.  Connect the Soundbar with the DC power connector from the Soundbar Power adapter.
4.  Insert the mini stereo plug from the back of the Soundbar into the computers audio output jack.  

Back to Contents Page    
Troubleshooting  
 
SX2210T  Flat Panel Monitor  
   Self - Test  
   Common Problems  
   Product - Specific Problems  
   Universal Serial Bus Specific Problems  
   Dell Soundbar Problems  
   Camera Problems  
   Dell TouchCam Problems  
   Facial Recognition (FastAccess) Problems  
   Touch Screen Problems  
   
Self - Test  
Your monitor provides a self - test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are...

 
4. Carefully inspect the screen for abnormalities.   
5. Press the  shortcut key 4  key on the front panel again. The color of the screen changes to red.   
6. Inspect the display for any abnormalities.    
7. Repeat steps 5 and 6 to inspect the display in green, blue, and white colored screens.    
The test is complete when the white screen appears. To exit, press the  shortcut key 4  key again.    
If you do not detect any screen abnormalities upon using the built - in diagnostic tool, the monitor is...

   
Product - Specific Problems  
 
 
Universal Serial Bus (USB) Specific Problems  
   
 Problems  Safety Related 
Issues Visible signs of 
smoke or sparks l Do not perform any troubleshooting steps.   
l Contact Dell immediately.   
Intermittent 
Problems Monitor malfunctions 
on & off l Ensure that the video cable connecting the monitor to the computer is connected properly and is secure.    
l Reset the monitor to Factory Settings.    
l Perform monitor self - test feature check to determine if the...

   
Camera Problems  Distorted Sound Computers sound card is used 
as the audio source l Clear any obstructions between the Soundbar and the user.   
l Confirm that the audio line - in plug is completely inserted into the jack of the sound card. 
l Set all Windows volume controls to their midpoints.   
l Decrease the volume of the audio application.   
l Turn the Power/Volume knob on the Soundbar counter - clockwise to a lower volume 
setting.   
l Clean and reseat the audio line - in plug.   
l...