Dell Projector S500/S500wi User Manual

							Using Your Projector41
• When Toggle is selected in the Set Function menu, press the Function 
button to select Normal/Draw/Stable mode.
 
NOTE: Interactive pen cannot support Wi ndows Mouse property function 
Switch primary and secondary buttons. 
						

							42Using Your Projector
Using the Wrist Strap (for S500wi only)
Please use the wrist strap as a safety prec aution in case of loss of grip on the 
Interactive Pen, and prevent damage to the Interactive Pen, surrounding objects, 
or injury to other people.
1Feed the cord on the wrist strap through the connector holder.
2Wear the wrist strap on your wrist. 
						

							Using Your Projector43
Installing the Remote Control Batteries
 NOTE: Remove the batteries from the remote control when not in use.
1Press the tab to lift the battery compartment cover.
2Check the polarity (+/-)  marking on the batteries.
3Insert the batteries and alig n their polarity correctly 
according to the marking in the battery compartment.
 
NOTE: Avoid mixing different types  of batteries or using 
new and old batteries together.
4Slip the battery cover back.
1
2
3
4 
						

							44Using Your Projector
Charging the Interactive Pen Battery (for 
S500wi only)
When the Interactive Pen amber battery light starts to blink, its internal battery is 
low (If the battery is fully discharged, you will not be able to turn the Interactive 
Pen on by pressing its nib, left, right or set function buttons).
To charge the battery, connect a mini US B cable between the Interactive Pen and 
your computer or laptop (If connecting  to computer or laptop, make sure the 
computer or laptop is powered on). The battery light will stay on while the battery 
is charging and turn off when the battery is fully charged.
When charging is finished, you can unplu g the mini USB cable (or keep the cable 
connected and use the Interactive Pen while its charging).
 
NOTE: For first time use, it takes at leas t 4-5 hours to fully charge the battery. A 
fully charged battery will allow 25 hours  of non-stop use or up to 4 weeks in 
standby.
 
CAUTION: The lithium battery is only rechar geable and is not user replaceable 
or serviceable. If your Interact ive Pen cannot charge, contact Dell (See 
Contacting Dell on page 125).
 
CAUTION: Always use the included mini USB cable and your computer (or use 
the Docking Charger) to charge the Intera ctive Pen. The Docking Charger is not 
shipped with your projector. You can  purchase it on the Dell website at 
www.dell.com. 
						

							Using Your Projector45
Docking Charger Introduct ion (Optional, for 
S500wi only)
 NOTE: The Docking Charger is not shipped with your projector. You can 
purchase the Docking Charger on the Dell website at  www.dell.com.
LED Indicator on Docking Charger
1Power LED light
2 Mini USB connector
3 Po w e r  s w it c h
4 Po w e r  c o rd  c o n ne c t or
Green LED Solid 
On When the docking charger is switched on, the Green LED 
will turn solid ON.
Green LED Off The Green LED will turn  Off when the docking charger is 
switched off.
Front View Back View 
						

							46Using Your Projector
LED Indicator on Interactive Pen
Docking Charger Specification (Power Supply)
Amber LED Solid 
On The Amber LED will turn soli
d ON during the charge 
process.
Amber LED Off Once battery is fully charged, the LED will turn OFF  indicating Charge Complete.
Amber LED 
Flashing If the Amber LED starts FL
ASHING (0.4sec ON, 0.6sec 
OFF, 1sec per flashing cycle), it indicates no charging takes 
place. Charger error or bad battery is identified.
Model: Interactive Projector Pen Charging Station
Power Supply: Input AC 100-240 V, 50-60 Hz, 0.2 A Output DC 5 V/1 A
Maximum temperature: 40 ºC 
						

							Using Your Projector47
Charging the Interactive Pen Battery by 
Docking Charger
When the Interactive Pen amber battery light start to blink, its internal battery is 
low (If the battery is fully discharged, you wont be able to turn the Interactive Pen 
on by pressing its nib, left,  right or set function buttons).
To charge the battery, you can follow the following steps to install:
1Connect the power cable to the wall outlet.
2Plug the Interactive Pen into the Mini USB port of the docking charger.
3Turn On the power switch on the docking charger. 
						

							48Using Your Projector
 NOTE: During the charging process, Interactive Pen amber battery light will be 
lit all the time until the charging completed.
 
NOTE: For first time use, it takes at leas t 4-5 hours to fully charge the battery. A 
fully charged battery will allow up to 25 hours of non-stop use or up to 4 weeks 
in standby.
 
CAUTION: If your docking charger cannot charge, contact DELL™. 
						

							Using Your Projector49
Operating Range with Remote Control
 NOTE: Actual operating range may slightly  differ from the diagram. Weak 
batteries will also prevent the remote  control from properly operating the 
projector.
Operating range
Angle ±20° 
Distance 7 m/22.97 feet
Angle
Distance
Angle
Distance 
						

							50Using Your Projector
Operating Range with Interactive Pen 
(for S500wi only)
 NOTE: 
• Projector is at 2000 lm brightness, with 100 inches image size, and in 
Bright mode.
• Can support multiple pens (up to 10 pens) connecting to one projector  but the pens cannot be used simultaneously.
• Actual operating range may slightly differ from the diagram.
• The projector brightness decay will affect the operating range of the pen.
Distance
Angle
Angle
DistanceOperating rangeAngleDistance 
0°
20°45°
9 m/29.53 feet
7 m/22.97 feet
5 m/16.4 feet