Dell Powervault Lto-3 Manual

Back to Contents Page  
- 3 Autoloader Users Guide  
  Remote Management Unit Overview  
  Configuration Page  
  Firmware Page  
  Error Log and Diagnostics Page  
  Library Operations Page  
 
Remote Management Unit Overview  
Your Dell PowerVault 124T LTO - 3 autoloader includes an Ethernet interface that allows remote administration. The interface, called the Remote Management 
Unit (RMU), includes a Web server that provides a Hypertext Markup Language (HTML) - based graphic user interface (GUI) for...

 
Remote Management Unit (RMU) Web Interface Status Pane  
1. System Status  -   provides model and serial number (S/N) of both the  autoloader and the drive. This section also contains the Dell Service Tag  number. 
You will need this number if you call for technical support.  
2. Autoloader   -  provides status specific to the automation device.  Refer to  Front Panel Administration  for information  regarding magazine configuration. 
Refer to  Installation  Overview  for information regarding enabling...

SCSI ID  
You can change the drives SCSI ID from the Remote Management Unit. To change the SCSI ID:  
1. From any page, click the  Configuration  heading. The  Configuration  screen displays.  
2. Under  System Operations , select  SCSI ID .  
3. Click the drop - down box to select a number to assign for the new SCSI ID.  
4. Click  submit .  
Compression  
For the Dell PowerVault 124T LTO - 3 autoloader, data compression is drive - dependent. The front panel and the Remote Management Unit will display...

handled by the backup package you have installed instead.  
4. Click  submit .  
Setting the Magazines  
This setting is used to report the number of storage elements and the element address to the SCSI host. This setting must match the physical configuration in 
order for correct information to be reported. This setting only affects the information reported to the SCSI host. This setting does not affect the access to 
magazine slots from the front panel or the Remote Management Unit. Those interfaces...

system, the IP address may change depending on the network administrators settings.  
To  Set IP  address:  
1. Clear the check box to remove the check mark from the  DHCP  field, if applicable.  
2. In the IP address fields, type the static IP address using the  key to move from box to box.  
3. If no check mark appears in the box next to  DHCP , the static IP address option is enabled. To change a static IP address, type in the new address in 
the IP address fields using the  key to move from box to...

4. Type the IP addresses in the appropriate boxes.  
5. Click  submit  to save.  
Client Overlap Control  is a management policy on controlling how the Web server handles overlapping control requests from multiple clients on the 
authorized client list. The options include  No Locking ,  Full Locking , and  Time - Based Locking .  
l No Locking  allows multiple clients to have unrestricted access to control the system as long as they are on the authorized client list.  
l Full Locking  permits only one...

1. From any page, click the  Diagnostics  heading. The  Diagnostics  screen will be displayed.  
2. Under  View Error and History Logs , click  View Logs . You can also save the logs to a file by clicking  Save Logs . If you save the logs to a file, you must 
select a destination folder within 60 seconds.  
 
   
Running Diagnostics Tests  
A minimum of two cartridges are required to run the diagnostic tests. The diagnostic tests available on the autoloader include:    
l Loader  -  Picker Test   
l...

1. From any page, click the  Library Operations  heading. The  Library Operations  screen displays.  
2. From the  Library Operations  page, click  Inventory . The autoloader starts an inventory immediately.  
Set to Home  
If the autoloader is not able to successfully execute a  Moving Tapes  or an  Inventory  command, try executing a  Set to Home  command, and then retry the 
move or inventory command again.  
The  Set to Home  command resets the autoloader as a means to help the autoloader recover...

Back to Contents Page  
- 3 Autoloader Users Guide  
  Physical Specifications  
  Autoloader Performance Specifications  
  Autoloader Environmental Specifications  
  Autoloader Power Specifications  
  Autoloader Vibration Specifications  
  Autoloader Shock Specifications  
  Tape Drive Specifications  
 
Physical Specifications  
 
 
Autoloader Performance Specifications  
 
 
Autoloader Environmental Specifications  
 
     
  Height   8.9 cm (3.5 in)  
Width   45 cm (17.7 in)  
Length   75.46 cm...

Autoloader Power Specifications  
 
 
Autoloader Vibration Specifications  
 
 
Autoloader Shock Specifications  
 
 
Tape Drive Specifications  
 
LTO - 3 Drive Specifications  
Media Capacity  
Media Specifications  
 
Back to Contents Page    Specification  
Line voltage 60 Hz system:  90  –   265 VAC  
50 Hz system:  90  –   265 VAC  
Line frequency   47  –   63 Hz  
AC Input current   60 Hz system:  4.0 A (RMS) for 115 VAC  
50 Hz system:  2.0 A (RMS) for 230 VAC  
Power consumption   60 Hz  = 75 W;...