Dell H 625 Cdw Manual

Understanding the System Menus |91
❚Admin Settings > Network > Wi-Fi>
Wi-Fi Setup Wizard
NOTE:
•Wi-Fi Setup Wizard is available  only when the printer is connected using the wireless network.
• Wireless network is available on Dell H625cdw and Dell H825cdw.
Configures the wireless network interface.
❚Admin Settings > Network > Wi-Fi >  Wi-Fi Setup Wizard >
Select access point
Selects the access point from the list.
❚Admin Settings > Network > Wi-Fi > Wi-Fi Setup Wizard >
Manual SSID Setup
Configures the...

92| Understanding the System Menus
❚Admin Settings > Network > Wi-Fi > Wi-Fi Setup Wizard > Manual SSID Setup > SSID >
Ad-hoc
Selects to configure the wireless setting without the access point such as a wireless 
router.
❚Admin Settings > Network > Wi-Fi >
WPS Setup
NOTE:
•WPS Setup is available only  when the printer is connecte d using the wireless network.
• WPS Setup is available on Dell H625cdw and Dell H825cdw.
Configures the wireless network using WPS.
❚Admin Settings > Network >  Wi-Fi >
IP Mode...

Understanding the System Menus |93
❚Admin Settings > Network > Wi-Fi >
IPsec
NOTE:
•IPsec is displayed only when IPsec  is enabled on Dell Printer Configuration Web Tool.
Disables IPsec.
❚Admin Settings > Network > Wi-Fi >
Reset Wi-Fi
NOTE:
•Reset Wi-Fi setting is available only when the printer is connected to the wireless network.
• Wireless network is available on Dell H625cdw and Dell H825cdw.
Initializes wireless network settings. After executing this setting and restarting the printer, 
all...

94| Understanding the System Menus
❚Admin Settings > Network >
Ethernet
NOTE:
•When using a wired network, the  Wi-Fi | WPS menu is not available.
Checks or specifies wired network settings.
❚Admin Settings > Network >  Ethernet >
IP Mode
Configures the IP mode.
❚Admin Settings > Network > Ethernet >
TCP/IP
Configures TCP/IP settings.
Paired Device Displays the status of the Wi-Fi Direct 
connections between the printer and up to 3 
Wi-Fi mobile devices.
Disconnect All Disconnect now Disconnects all the...

Understanding the System Menus |95
❚Admin Settings > Network > Ethernet >
IPsec
NOTE:
•IPsec is displayed only when IPsec is enabled on Dell Printer Configuration Web Tool.
Disables IPsec.
❚Admin Settings > Network >  Ethernet >
Connection Speed
NOTE:
•The Connection Speed setting is  available only when the printer is connected to the wired 
network.
Specifies the communication speed and the duplex settings of Ethernet. The change 
becomes effective after the printer is turned off and then on again.
Get...

96| Understanding the System Menus
❚Admin Settings > Network >
Protocols
Enables or disables each protocol. The change becomes effective after the printer is 
turned off and then on again.
*1Stands for Web Services on Devices*2Stands for Simple Network Management Protocol
❚Admin Settings > Network >
Advanced Settings
Specifies advanced network settings.
❚Admin Settings > Network >  Advanced Settings >
IP Filter
Specifies whether to enable the IP filter feature, which only allows communication with...

Understanding the System Menus |97
❚Admin Settings > Network > Advanced Settings >
PS Data Format
Specifies PostScript 3 Compatible communicat ion protocol for a parallel interface, you 
can configure the  PS Data Format  settings for the wired network. The change 
becomes effective after the printer is turned off and then on again.
❚Admin Settings >  Network >
Reset LAN
Initializes wired network data stored in non-volatile memory (NVM). After executing this 
setting and restarting the printer, all wired...

98| Understanding the System Menus
❚Admin Settings > Fax Settings > Fax Line Settings >
Line Type
Specifies the default line type to  PSTN or PBX.
❚Admin Settings > Fax Settings >  Fax Line Settings >
Line Monitor
Specifies whether to enable the Line Monitor se tting. Set the volume of the line monitor, 
which audibly monitors a transmission through the internal speaker until a connection is 
made.
❚Admin Settings > Fax Settings >  Fax Line Settings >
DRPD Pattern
Provides a separate number for faxing...

Understanding the System Menus |99
❚Admin Settings > Fax Settings > Incoming Defaults >
Receive Mode
Selects the default fax receiving mode.
❚Admin Settings > Fax Settings > Incoming Defaults >
Ring Tone Volume
Specifies whether to enable the Ring Tone Volume setting. Set the volume of the ring 
tone, which indicates that an incoming call  is a telephone call through the internal 
speaker when  Receive Mode is set to  Telephone / Fax.
❚Admin Settings > Fax Settings >  Incoming Defaults >
Auto Receive...

100| Understanding the System Menus
Specifies whether to require a password to print received faxes, and to set or change the 
password.
*This item is available only when Secure Receive Set is set to Enable.
❚Admin Settings > Fax Settings >  Incoming Defaults >
Received Fax Forward
Sets whether to forward incoming faxes to a specified destination.
*1Depending on the e-mail server settings, the printer may not get an error which occurs during the transfer.*2This item is available only when the  E-Mail...