Dell Drac 5 User Manual
Have a look at the manual Dell Drac 5 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 327 Dell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
DRAC 5 Property Database Group and Object Definitions381 Description When the DRAC 5 cfgSerialConsoleEnable property is set to 0 (disabled), the DRAC 5 serial port becomes the IPMI serial port. This property determines the IPMI defined mode of the serial port. In Basic mode, the port uses binary data with the intent of communicating with an application program on the serial client. In Terminal mode, the port assumes that a dumb ASCII terminal is connected and allows very simple commands to be entered. cfgIpmiSerialBaudRate (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 9600, 19200, 57600, 115200 Default 57600 Description Specifies the baud rate for a serial connection over IPMI. cfgIpmiSerialChanPrivLimit (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 2 (User) 3 (Operator) 4 (Administrator) Default 4 Description Specifies the maximum privilege level allowed on the IPMI serial channel.
382DRAC 5 Property Database Group and Object Definitions cfgIpmiSerialFlowControl (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 0 (None) 1 (CTS/RTS) 2 (XON/XOFF) Default 1 Description Specifies the flow control setting for the IPMI serial port. cfgIpmiSerialHandshakeControl (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 0 (FALSE) 1 (TRUE) Default 1 Description Enables or disables he IPMI terminal mode handshake control. cfgIpmiSerialLineEdit (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 0 (FALSE) 1 (TRUE)
DRAC 5 Property Database Group and Object Definitions383 Default 1 Description Enables or disables line editing on the IPMI serial interface. cfgIpmiSerialEchoControl (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 0 (FALSE) 1 (TRUE) Default 1 Description Enables or disables echo control on the IPMI serial interface. cfgIpmiSerialDeleteControl (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 0 (FALSE) 1 (TRUE) Default 0 Description Enables or disables delete control on the IPMI serial interface. cfgIpmiSerialNewLineSequence (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission.
384DRAC 5 Property Database Group and Object Definitions Legal Values 0 (None) 1 (CR-LF) 2 (NULL) 3 () 4 () 5 () Default 1 Description Specifies the newline sequence specification for the IPMI serial interface. cfgIpmiSerialInputNewLineSequence (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 0 () 1 (NULL) Default 1 Description Specifies the input newline sequence specification for the IPMI serial interface. cfgIpmiSol This group is used to configure the Serial-Over-LAN capabilities of the system.
DRAC 5 Property Database Group and Object Definitions385 cfgIpmiSolEnable (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 0 (FALSE) 1 (TRUE) Default 1 Description Enables or disables Serial Over LAN (SOL). cfgIpmiSolBaudRate (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 9600, 19200, 57600, 115200 Default 57600 Description The baud rate for serial communication over LAN. cfgIpmiSolMinPrivilege (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 2 (User) 3 (Operator) 4 (Administrator)
386DRAC 5 Property Database Group and Object Definitions Default 4 Description Specifies the minimum privilege level required for serial over LAN access. cfgIpmiSolAccumulateInterval (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 1 – 255. Default 10 Description Specifies the typical amount of time that the BMC waits before transmitting a partial SOL character data packet. This value is 1-based 5ms increments. cfgIpmiSolSendThreshold (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 1 – 255 Default 255 Description The SOL threshold limit value. cfgIpmiLan This group is used to configure the IPMI-Over-LAN capabilities of the system.
DRAC 5 Property Database Group and Object Definitions387 cfgIpmiLanEnable (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 0 (FALSE) 1 (TRUE) Default 1 Description Enables or disables the IPMI-Over-LAN interface. cfgIpmiLanPrivLimit (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 2 (User) 3 (Operator) 4 (Administrator) Default 0 Description Specifies the maximum privilege level allowed for IPMI over LAN access. cfgIpmiLanAlertEnable (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 0 (FALSE) 1 (TRUE)
388DRAC 5 Property Database Group and Object Definitions Default 1 Description Enables or disables global e-mail alerting. This property overrides all individual e-mail alerting enable/disable properties. cfgIpmiEncryptionKey (Read/Write) NOTE: To view or modify this property, you must have Configure DRAC 5 permission and administrator privileges. Legal Values A string of hexadecimal digits from 0 to 20 characters with no spaces. Default 00000000000000000000 Description The IPMI encryption key. cfgIpmiPetCommunityName (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values A string up to 18 characters. Default public Description The SNMP community name for traps.
DRAC 5 Property Database Group and Object Definitions389 cfgIpmiPef This group is used to configure the platform event filters available on the managed server. The event filters can be used to control policy related to actions that are triggered when critical events occur on the managed system. cfgIpmiPefName (Read Only) Legal Values String. Maximum Length = 255. Default The name of the index filter. Description Specifies the name of the platform event filter. cfgIpmiPefIndex (Read Only) Legal Values 1 – 17 Default The index value of a platform event filter object. Description Specifies the index of a specific platform event filter.
390DRAC 5 Property Database Group and Object Definitions cfgIpmiPefAction (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 0 (None) 1 (Power Down) 2 (Reset) 3 (Power Cycle) Default 0 Description Specifies the action that is performed on the managed system when the alert is triggered. cfgIpmiPefEnable (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 0 (FALSE) 1 (TRUE) Default 1 Description Enables or disables a specific platform event filter. cfgIpmiPet This group is used to configure platform event traps on the managed system.