Dell Drac 5 User Manual
Have a look at the manual Dell Drac 5 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 327 Dell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
DRAC 5 Property Database Group and Object Definitions351 Default ^ () NOTE: The ^ is the key. Description This key or key combination terminates text console redirection when using the connect com2 command. The cfgSerialConsoleQuitKey value can be represented by one of the following: Decimal value — For example: 95 Hexidecimal value — For example: 0x12 Octal value — For example: 007 ASCII value — For example: ^a ASCII values may be represented using the following Escape Key codes: (a) ^ followed by any alphabetic (a-z, A-Z) (b) ^ followed by the listed special characters: [ ] ^ _ cfgSerialConsoleIdleTimeout (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 0 = No time-out 60 – 1920 Default 300 Description The maximum number of seconds to wait before an idle serial session is disconnected.
352DRAC 5 Property Database Group and Object Definitions cfgSerialConsoleNoAuth (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 0 (enables serial login authentication) 1 (disables serial login authentication) Default 0 Description Enables or disables the RAC serial console login authentication. cfgSerialConsoleCommand (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Description Specifies a serial command that is executed after a user logs into the serial console interface. Default Example connect com2 cfgSerialHistorySize (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 0 – 8192 Default 8192
DRAC 5 Property Database Group and Object Definitions353 Description Specifies the maximum size of the serial history buffer. cfgSerialSshEnable (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 1 (TRUE) 0 (FALSE) Default 1 Description Enables or disables the secure shell (SSH) interface on the DRAC 5. cfgSerialTelnetEnable (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 1 (TRUE) 0 (FALSE) Default 0 Description Enables or disables the telnet console interface on the RAC. cfgSerialCom2RedirEnable (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Default 1
354DRAC 5 Property Database Group and Object Definitions Legal Values 1 (TRUE) 0 (FALSE) Description Enables or disables the console for COM 2 port redirection. cfgNetTuning This group enables users to configure the advanced network interface parameters for the RAC NIC. When configured, the updated settings may take up to a minute to become active. NOTICE: Use extra precaution when modifying properties in this group. Inappropriate modification of the properties in this group can result in your RAC NIC become inoperable. cfgNetTuningNicAutoneg (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 1 (Enabled) 0 (Disabled) Default 1 Description Enables autonegotiation of physical link speed and duplex. If enabled, autonegotiation takes priority over values set in the cfgNetTuningNic100MB and cfgNetTuningNicFullDuplex objects.
DRAC 5 Property Database Group and Object Definitions355 cfgNetTuningNic100MB (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 0 (10 MBit) 1 (100 MBit) Default 1 Description Specifies the speed to use for the RAC NIC. This property is not used if the cfgNetTuningNicAutoNeg is set to 1 (enabled). cfgNetTuningNicFullDuplex (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 0 (Half Duplex) 1 (Full Duplex) Default 1 Description Specifies the duplex setting for the RAC NIC. This property is not used if the cfgNetTuningNicAutoNeg is set to 1 (enabled). cfgNetTuningNicMtu (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 576 – 1500
356DRAC 5 Property Database Group and Object Definitions Default 1500 Description The size in bytes of the maximum transmission unit used by the DRAC 5 NIC. cfgNetTuningTcpSrttDflt (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 6 – 384 Default 6 Description The smoothed round trip time-out base default value for TCP retransmission round trip time in ½ second units. (Type hexadecimal values.) cfgOobSnmp The group contains parameters to configure the SNMP agent and trap capabilities of the DRAC 5. One instance of the group is allowed. The following subsections describe the objects in this group. cfgOobSnmpAgentCommunity (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values String. Maximum Length = 31. Default public
DRAC 5 Property Database Group and Object Definitions357 Description Specifies the SNMP Community Name used for SNMP Traps. cfgOobSnmpAgentEnable (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 1 (TRUE) 0 (FALSE) Default 0 Description Enables or disables the SNMP agent in the RAC. cfgRacTuning This group is used to configure various RAC configuration properties, such as valid ports and security port restrictions. cfgRacTuneHttpPort (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 10 – 65535 Default 80 Description Specifies the port number to use for HTTP network communication with the RAC.
358DRAC 5 Property Database Group and Object Definitions cfgRacTuneHttpsPort (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 10 – 65535 Default 443 Description Specifies the port number to use for HTTPS network communication with the RAC. cfgRacTuneIpRangeEnable NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 1 (TRUE) 0 (FALSE) Default 0 Description Enables or disables the IP Address Range validation feature of the RAC. cfgRacTuneIpRangeAddr NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values String, IP address formatted. For example, 192.168.0.44. Default 192.168.1.1
DRAC 5 Property Database Group and Object Definitions359 Description Specifies the acceptable IP address bit pattern in positions determined by the 1s in the range mask property (cfgRacTuneIpRangeMask). cfgRacTuneIpRangeMask NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values Standard IP mask values with left-justified bits Default 255.255.255.0 Description String, IP-address formatted. For example, 255.255.255.0. cfgRacTuneIpBlkEnable NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 1 (TRUE) 0 (FALSE) Default 0 Description Enables or disables the IP address blocking feature of the RAC. cfgRacTuneIpBlkFailcount NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 2 – 16
360DRAC 5 Property Database Group and Object Definitions Default 5 Description The maximum number of login failure to occur within the window before the login attempts from the IP address are rejected. cfgRacTuneIpBlkFailWindow NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 2 – 65535 Default 60 Description Defines the timespan in seconds that the failed attempts are counted. When the failure attempts age to this limit, the failures are dropped from the count. cfgRacTuneIpBlkPenaltyTime NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 2 – 65535 Default 300 Description Defines the timespan in seconds that session requests from an IP address with excessive failures are rejected.