Dell Drac 5 User Manual
Have a look at the manual Dell Drac 5 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 327 Dell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 326
326RACADM Subcommand Overview
Synopsis
racadm usercertupload -t [-f ] -i
<
index>
Options
Table A-53 describes the usercertupload subcommand options.
The usercertupload command returns 0 when successful and returns a
nonzero number when unsuccessful.
Restrictions
The usercertupload subcommand can only be executed from a local or a
remote RACADM client.
Example
racadm usercertupload -t 1 -f c:\cert\cert.txt -i 6
Supported Interfaces
Local RACADM
Remote RACADM
Table A-53. usercertupload Subcommand...](http://img.usermanuals.tech/thumb/19/59943/w64_dell-drac-5-user-manual-1488462182_d-325.png "Page 326
326RACADM Subcommand Overview
Synopsis
racadm usercertupload -t [-f ] -i
<
index>
Options
Table A-53 describes the usercertupload subcommand options.
The usercertupload command returns 0 when successful and returns a
nonzero number when unsuccessful.
Restrictions
The usercertupload subcommand can only be executed from a local or a
remote RACADM client.
Example
racadm usercertupload -t 1 -f c:\cert\cert.txt -i 6
Supported Interfaces
Local RACADM
Remote RACADM
Table A-53. usercertupload Subcommand...")
![Page 327
RACADM Subcommand Overview327
usercertview
NOTE: To use this command, you must have Configure DRAC 5 permission.
Table A-54 describes the usercertview subcommand.
Synopsis
racadm sslcertview -t [-A] -i
Options
Table A-55 describes the sslcertview subcommand options.
Supported Interfaces
Remote RACADM
telnet/ssh/serial RACADM
Table A-54. usercertview
Subcommand Description
usercertviewDisplays the user certificate or user CA
certificate that exists on the DRAC.
Table A-55. sslcertview Subcommand...](http://img.usermanuals.tech/thumb/19/59943/w64_dell-drac-5-user-manual-1488462182_d-326.png "Page 327
RACADM Subcommand Overview327
usercertview
NOTE: To use this command, you must have Configure DRAC 5 permission.
Table A-54 describes the usercertview subcommand.
Synopsis
racadm sslcertview -t [-A] -i
Options
Table A-55 describes the sslcertview subcommand options.
Supported Interfaces
Remote RACADM
telnet/ssh/serial RACADM
Table A-54. usercertview
Subcommand Description
usercertviewDisplays the user certificate or user CA
certificate that exists on the DRAC.
Table A-55. sslcertview Subcommand...")
DRAC 5 Property Database Group and Object Definitions331 Default The current RAC firmware build version. For example, 05.12.06. Description A string containing the current product build version. idRacName (Read Only) Legal Values String of up to 15 ASCII characters. Default DRAC 5 Description A user assigned name to identify this controller. idRacType (Read Only) Default 6 Description Identifies the remote access controller type as the DRAC 5. cfgLanNetworking This group contains parameters to configure the DRAC 5 NIC. One instance of the group is allowed. All changes/updates to the objects in this group will require the DRAC 5 NIC to be reset, which may cause a brief loss in connectivity. Objects that change the DRAC 5 NIC IP address settings will close all active user sessions and require users to reconnect using the updated IP address settings.
332DRAC 5 Property Database Group and Object Definitions cfgDNSDomainNameFromDHCP (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 1 (TRUE) 0 (FALSE) Default 1 Description Specifies that the RAC DNS Domain Name should be assigned from the network DHCP server. cfgDNSDomainName (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values String of up to 254 ASCII characters. At least one of the characters must be alphabetic. Characters are restricted to alphanumeric, - and . NOTE: Microsoft® Active Directory® only supports Fully Qualified Domain Names (FQDN) of 64 bytes or fewer. Default Description The DNS domain name. This parameter is only valid if cfgDNSDomainNameFromDHCP is set to 0 (FALSE). cfgDNSRacName (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission.
DRAC 5 Property Database Group and Object Definitions333 Legal Values String of up to 63 ASCII characters. At least one character must be alphabetic. NOTE: Some DNS servers only register names of 31 characters or fewer. Default rac-service tag Description Displays the RAC name, which is rac-service tag (by default). This parameter is only valid if cfgDNSRegisterRac is set to 1 (TRUE). cfgDNSRegisterRac (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 1 (TRUE) 0 (FALSE) Default 0 Description Registers the DRAC 5 name on the DNS server. cfgDNSServersFromDHCP (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 1 (TRUE) 0 (FALSE) Default 0
334DRAC 5 Property Database Group and Object Definitions Description Specifies that the DNS server IP addresses should be assigned from the DHCP server on the network. cfgDNSServer1 (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values A string representing a valid IP address. For example: 192.168.0.20. Description Specifies the IP address for DNS server 1. This property is only valid if cfgDNSServersFromDHCP is set to 0 (FALSE). NOTE: cfgDNSServer1 and cfgDNSServer2 may be set to identical values while swapping addresses. cfgDNSServer2 (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values A string representing a valid IP address. For example: 192.168.0.20. Default 0.0.0.0 Description Retrieves the IP address for DNS server 2. This parameter is only valid if cfgDNSServersFromDHCP is set to 0 (FALSE). NOTE: cfgDNSServer1 and cfgDNSServer2 may be set to identical values while swapping addresses. cfgNicEnable (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission.
DRAC 5 Property Database Group and Object Definitions335 Legal Values 1 (TRUE) 0 (FALSE) Default 0 Description Enables or disables the RAC network interface controller. If the NIC is disabled, the remote network interfaces to the RAC will no longer be accessible, and the RAC will only be available through the serial or local RACADM interfaces. cfgNicIpAddress (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. This parameter is only configurable if the cfgNicUseDhcp parameter is set to 0 (FALSE). Legal Values A string representing a valid IP address. For example: 192.168.0.20. Default 192.168.0.120 Description Specifies the static IP address to assign to the RAC. This property is only valid if cfgNicUseDhcp is set to 0 (FALSE). cfgNicNetmask (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. This parameter is only configurable if the cfgNicUseDhcp parameter is set to 0 (FALSE). Legal Values A string representing a valid subnet mask. For example: 255.255.255.0.
336DRAC 5 Property Database Group and Object Definitions Default 255.255.255.0 Description The subnet mask used for static assignment of the RAC IP address. This property is only valid if cfgNicUseDhcp is set to 0 (FALSE). cfgNicGateway (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. This parameter is only configurable if the cfgNicUseDhcp parameter is set to 0 (FALSE). Legal Values A string representing a valid gateway IP address. For example: 192.168.0.1. Default 192.168.0.1 Description The gateway IP address used for static assignment of the RAC IP address. This property is only valid if cfgNicUseDhcp is set to 0 (FALSE). cfgNicUseDhcp (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 1 (TRUE) 0 (FALSE) Default 0
DRAC 5 Property Database Group and Object Definitions337 Description Specifies whether DHCP is used to assign the RAC IP address. If this property is set to 1 (TRUE), then the RAC IP address, subnet mask, and gateway are assigned from the DHCP server on the network. If this property is set to 0 (FALSE), the static IP address, subnet mask, and gateway is assigned from the cfgNicIpAddress, cfgNicNetmask, and cfgNicGateway properties. NOTE: If you are updating your system remotely, use the setniccfg command. cfgNicSelection (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 0 (shared) 1 (shared with failover) 2 (dedicated) Default 2 Description Specifies the current mode of operation for the RAC network interface controller (NIC). Table B-1 describes the supported modes. Table B-1. cfgNicSelection Supported Modes Mode Description Shared Used if the host server integrated NIC is shared with the RAC on the host server. This mode enables configurations to use the same IP address on the host server and the RAC for common accessibility on the network. Shared with Failover Enables teaming capabilities between host server integrated network interface controllers. Dedicated Specifies that the RAC NIC is used as the dedicated NIC for remote accessibility.
338DRAC 5 Property Database Group and Object Definitions cfgNicMacAddress (Read Only) Legal Values A string representing the RAC NIC MAC address. Default The current MAC address of the RAC NIC. For example, 00:12:67:52:51:A3. Description The RAC NIC MAC address. cfgNicVLanEnable (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 1 (TRUE) 0 (FALSE) Default 0 Description Enables or disables the VLAN capabilities of the RAC/BMC. cfgNicVLanId (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 0 – 4094 Default 0
DRAC 5 Property Database Group and Object Definitions339 Description Specifies the VLAN ID for the network VLAN configuration. This property is only valid if cfgNicVLanEnable is set to 1 (enabled). cfgNicVLanPriority (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 0 – 7 Default 0 Description Specifies the VLAN Priority for the network VLAN configuration. This property is only valid if cfgNicVLanEnable is set to 1 (enabled). cfgRemoteHosts This group provides properties that allow configuration of various remote components, which include the SMTP server for e-mail alerts and TFTP server IP addresses for firmware updates. cfgRhostsSmtpServerIpAddr (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values A string representing a valid SMTP server IP address. For example, 192.168.0.55. Default 0.0.0.0 Description The IP address of the network SMTP server. The SMTP server transmits e-mail alerts from the RAC if the alerts are configured and enabled.
340DRAC 5 Property Database Group and Object Definitions cfgRhostsFwUpdateTftpEnable (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 1 (TRUE) 0 (FALSE) Default 1 Description Enables or disables the RAC firmware update from a network TFTP server. cfgRhostsFwUpdateIpAddr (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values A string representing a valid TFTP server IP address. For example, 192.168.0.61. Default 0.0.0.0 Description Specifies the network TFTP server IP address that is used for TFTP RAC firmware update operations. cfgRhostsFwUpdatePath (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values String. Maximum length = 255.