Dell Drac 5 User Manual

							DRAC 5 Property Database Group and Object Definitions371
are attached you then can connect to the virtual devices remotely using 
DRAC5 web-based interface or the CLI. Setting this object to 0 will cause the 
devices to detach from the USB bus. 
 NOTE: You must restart your system to enable all changes.
cfgVirAtapiSrvPort (Read/Write)
 NOTE: To modify this property, you must have Access Virtual Media permission.
Legal Values
1 – 65535
Default
3669
Description
Specifies the port number used for encrypted virtual media connections to 
the RAC.
cfgVirAtapiSrvPortSsl (Read/Write)
 NOTE: To modify this property, you must have Configure DRAC 5 permission.
Legal Values
Any unused port number between 0 and 65535 decimal.
Default
3669
Description
Sets the port used for SSL Virtual Media connections. 
						

							372DRAC 5 Property Database Group and Object Definitions
cfgVirMediaKeyEnable (Read/Write) 
 NOTE: To modify this property, you must have Configure DRAC 5 permission.
Legal Values
1 (TRUE)
0 (FALSE)
Default
0
Description
Enables or disables the virtual media key feature of the RAC.
cfgVirMediaBootOnce (Read/Write)
 NOTE: To modify this property, you must have Configure DRAC 5 permission.
Legal Values
1 (Enabled)
0 (Disabled)
Default
0
Description
Enables or disables the virtual media boot-once feature of the RAC. If this 
property is enabled when the host server is rebooted, this feature will attempt 
to boot from the virtual media devices—if the appropriate media is installed 
in the device.
 NOTE: To enable the Boot Once feature, go to the BIOS Setup and manually 
change the boot order during system reboot.
cfgFloppyEmulation (Read/Write)
 NOTE: To modify this property, you must have Configure DRAC 5 permission. 
						

							DRAC 5 Property Database Group and Object Definitions373
Legal Values
1 (True)
0 (False)
Default
0
Description
When set to 0, the Virtual Floppy drive is recognized as a removable disk by 
Windows operating systems. Windows operating systems will assign a drive 
letter that is C: or higher during enumeration. When set to 1, the Virtual 
Floppy drive will be seen as a floppy drive by Windows operating systems. 
Windows operating systems will assign a drive letter of A: or B:.
cfgActiveDirectory
This group contains parameters to configure the DRAC 5 Active Directory 
feature.
cfgADRacDomain (Read/Write)
 NOTE: To modify this property, you must have Configure DRAC 5 permission.
Legal Values
Any printable text string with no white space. Length is limited to 254 
characters.
Default

Description
Active Directory Domain in which the DRAC resides.
cfgADRacName (Read/Write)
 NOTE: To modify this property, you must have Configure DRAC 5 permission. 
						

							374DRAC 5 Property Database Group and Object Definitions
Legal Values
Any printable text string with no white space. Length is limited to 254 
characters.
Default

Description
Name of DRAC as recorded in the Active Directory forest.
cfgADEnable (Read/Write)
 NOTE: To modify this property, you must have Configure DRAC 5 permission.
Legal Values
1 (TRUE)
0 (FALSE)
Default
0
Description
Enables or disables Active Directory user authentication on the RAC. If this 
property is disabled, local RAC authentication is used for user logins instead.
cfgADSpecifyServerEnable (Read/Write)
 NOTE: To modify this property, you must have Configure DRAC 5 permission.
Legal Values
1 or 0 (True or False)
Default
0 
						

							DRAC 5 Property Database Group and Object Definitions375
Description
1 (True) enables you to specify an LDAP or a Global Catalog server. 0 (False) 
disables this option.
cfgADDomainController (Read/Write)
 NOTE: To modify this property, you must have Configure DRAC 5 permission.
Legal Values
Valid IP address or fully qualified domain name (FQDN)
Default
No default values
Description
DRAC 5 uses the value you specify, to search the LDAP server for user names.
cfgADGlobalCatalog (Read/Write)
 NOTE: To modify this property, you must have Configure DRAC 5 permission.
Legal Values
Valid IP address or FQDN
Default
No default values
Description
DRAC 5 uses the value you specify, to search the Global Catalog server for 
user names.
cfgAODomain (Read/Write)
 NOTE: To modify this property, you must have Configure DRAC 5 permission.
Legal Values
Valid IP address or FQDN 
						

							376DRAC 5 Property Database Group and Object Definitions
Format
:
Default
No default values
Description
DRAC 5 uses the value you specify, to search the Association Object for user 
names.
cfgADSmartCardLogonEnable (Read/Write)
 NOTE: To modify this property, you must have Configure DRAC 5 permission.
Legal Values
1 (TRUE)
0 (FALSE)
Default
0
Description
Enables or disables the Smart Card logon on DRAC 5.
cfgADCRLEnable (Read/Write)
 NOTE: To modify this property, you must have Configure DRAC 5 permission.
Legal Values
1 (TRUE)
0 (FALSE)
Default
0 
						

							DRAC 5 Property Database Group and Object Definitions377
Description
Enables or disables the Certificate Revocation List (CRL) check for Active 
Directory-based Smart Card users.
cfgADAuthTimeout (Read/Write)
 NOTE: To modify this property, you must have Configure DRAC 5 permission.
Legal Values
15 – 300
Default
120
Description
Specifies the number of seconds to wait for Active Directory authentication 
requests to complete before timing out.
cfgADRootDomain (Read/Write)
 NOTE: To modify this property, you must have Configure DRAC 5 permission.
Legal Values
Any printable text string with no white space. Length is limited to 254 
characters.
Default

Description
Root domain of the Domain Forest. 
						

							378DRAC 5 Property Database Group and Object Definitions
cfgADType (Read/Write)
 NOTE: To modify this property, you must have Configure DRAC 5 permission.
Legal Values
1 = Enables Extended Schema with Active Directory.
2 = Enables Standard Schema with Active Directory.
Default
1 = Extended Schema
Description
Determines the schema type to use with Active Directory.
cfgADSSOEnable (Read/Write)
 NOTE: To modify this property, you must have Configure DRAC 5 permission.
Legal Values
1 (TRUE)
0 (FALSE)
Default
0
Description
Enables or disables Active Directory single sign-on authentication on the 
RAC.
cfgStandardSchema
This group contains parameters to configure the Standard Schema settings.
cfgSSADRoleGroupIndex (Read Only)
Legal Values
Integer from 1 to 5. 
						

							DRAC 5 Property Database Group and Object Definitions379
Description
Index of the Role Group as recorded in the Active Directory.
cfgSSADRoleGroupName (Read/Write)
 NOTE: To modify this property, you must have Configure DRAC 5 permission.
Legal Values
Any printable text string with no white space. Length is limited to 254 
characters.
Default
(blank)
Description
Name of the Role Group as recorded in the Active Directory forest.
cfgSSADRoleGroupDomain (Read/Write)
 NOTE: To modify this property, you must have Configure DRAC 5 permission.
Legal Values
Any printable text string with no white space. Length is limited to 
254 characters.
Default
(blank)
Description
Active Directory Domain in which the Role Group resides.
cfgSSADRoleGroupPrivilege (Read/Write)
 NOTE: To modify this property, you must have Configure DRAC 5 permission.
Legal Values
0x00000000 to 0x000001ff 
						

							380DRAC 5 Property Database Group and Object Definitions
Default
(blank)
Description
Use the bit mask numbers in Table B-4 to set role-based authority privileges 
for a Role Group.
cfgIpmiSerial
This group specifies properties used to configure the IPMI serial interface of 
the BMC.
cfgIpmiSerialConnectionMode (Read/Write)
 NOTE: To modify this property, you must have Configure DRAC 5 permission.
Legal Values
0 (Terminal)
1 (Basic)
Default
1
Table B-4. Bit Masks for Role Group Privileges
Role Group Privilege Bit Mask
Log In To DRAC 5 0x00000001
Configure DRAC 5 0x00000002
Configure Users 0x00000004
Clear Logs 0x00000008
Execute Server Control Commands 0x00000010
Access Console Redirection 0x00000020
Access Virtual Media 0x00000040
Test Alerts 0x00000080
Execute Debug Commands 0x00000100