DELL 2155cdn User Manual

Understanding the Tool Box Menus459
SSF Paper Type Plain* Sets the document type loaded in the 
single sheet feeder.
Plain Thick
Covers
Covers Thick
Coated
Coated Thick
Envelope
Recycled
Letterhead
Preprinted
Prepunched
Color
Plain - Side 2
Plain Thick - Side 2
Recycled - Side 2
Color - Side 2
2Sided
*21->1Sided* Prints on one side of a sheet of paper.
Long Edge BindingPrints on both sides of a sheet of paper 
to be bound by long edge. 
Short Edge BindingPrints on both sides of a sheet of paper 
to be...

460Understanding the Tool Box Menus
Fax Settings
Purpose:
To specify the fax settings.
Va l u e s :
Receive 
ModeTelephoneSets the default fax receiving mode to Telephone.
Fax
* Sets the default fax receiving mode to Fax.
Telephone/FaxSets the default fax receiving mode to Telephone/Fax.
Ans 
Machine/FaxSets the default fax receiving mode to Ans 
Machine/Fax.
DRPDSets the default fax receiving mode to DRPD.
Auto Rec Fax 0–255Sets the interval at which the printer goes into the fax 
receive mode after...

Understanding the Tool Box Menus461
Tone/Pulse Tone* Sets the dialing type to To n e.
Pulse (10PPS)Sets the dialing type to Pulse(10PPS).
Pulse (20PPS)Sets the dialing type to Pulse(20PPS).
Resend Delay 3–255Sets the interval between transmission attempts within 
the range of 3 to 255 seconds. 
8
* 
Redial 
Attempts0-13Sets the number of redial attempts to make when the 
destination fax number is busy, within the range of 0 to 
13.  3
* 
Redial Delay 1–15Sets the interval between redial attempts within...

462Understanding the Tool Box Menus
Duplex 
Print* 1OnPrints the received fax on both sides of a sheet of paper.
Off
* Does not print the received fax on both sides of a sheet 
of paper.
Sent Fax Fwd Off
* Does not forward any of the incoming faxes to a 
specified destination.
ForwardForwards the incoming faxes to a specified destination.
Print and 
ForwardPrints the incoming fax and forwards it to a specified 
destination.
Fax Fwd NumberSets the destination to which incoming faxes will be 
forwarded....

Understanding the Tool Box Menus463
Diagnosis
The Diagnosis tab includes the Chart Print, Machine Check, Paper Wrinkle 
Check Mode, Environment Sensor Info, Clean Developer, and Refresh 
Mode pages.
 NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Chart Print
Purpose:
To print various charts that can be used for diagnosis of the printer. The chart is 
printed to A4 or letter size paper.
Fax Transmit Print AlwaysPrints a transmission report after every fax 
transmission....

464Understanding the Tool Box Menus
Va l u e s :
Machine Check
Purpose:
To check the operation of the printer components.
Va l u e s :
Pitch Configuration ChartPrints full halftone pages for yellow, magenta, cyan, and 
black. Also prints pages to check the pitch. A total of 
five pages are output. 
Ghost Configuration ChartPrints a chart to check for ghost printing. One page is 
printed. 
4 Colors Configuration 
ChartBands of yellow, magenta, cyan, and black are printed 
with varying density. One page is...

Understanding the Tool Box Menus465
Paper Wrinkle Check Mode
Purpose:
To determine whether or not paper is wrinkled in the fuser.
This function stops printing before the paper enters the fuser. After you remove 
the paper inside the printer, check the following:
• If the paper is wrinkled, the wrinkle occurred in the part other than fuser.
• If the paper is not wrinkled, the wrinkle occurred in the fuser.
Va l u e s :
Machine 
CheckMain Motor 
Operation Check* Click Start to operate the main motor inside...

466Understanding the Tool Box Menus
Environment Sensor Info
Purpose:
Paper Size A4* Sets the size of paper to be used by the 
Paper Wrinkle Check Mode. 
A5
B5
Letter
Folio
Legal
Executive
Envelope #10
Monarch
DL
C5
Paper Type Plain
* Sets the type of paper to be used by the 
Paper Wrinkle Check Mode.
Plain Thick
Covers
Covers Thick
Label
Recycled
Envelope
Letterhead
Preprinted
Prepunched
Color
Rear side Off
* Does not use the print side 2 of the paper.
OnUses the print side 2 of the paper.
Color Mode...

Understanding the Tool Box Menus467
To print the internal environment sensor information of the printer to Result.
Va l u e s :
Clean Developer
Purpose:
To rotate the developer motor and stir the toner in the toner cartridge. 
Va l u e s :
Refresh Mode
Purpose:
To use up a toner cartridge or PHD unit when you need to replace it before the 
end of its life, or to stir the toner in a new toner cartridge.
 NOTE: Using the Refresh Mode consumes extra toner.
Va l u e s :
Resetting Defaults
After executing...

468Understanding the Tool Box Menus
1 Click Start All Programs Dell Printers Dell 2155 Multifunction 
Color Printer
 Tool Box.
 NOTE: The Select Printer window appears in this step when multiple 
printer drivers are installed on your computer. In this case, click the name of 
this printer listed in Printer Names, and then click OK.
The Tool Box opens.
2 Ensure that the Printer Maintenance tab is open.
3 Select Reset Defaults from the list at the left side of the page.
The Reset Defaults page...