DELL 2155cdn User Manual

Understanding the Tool Box Menus439
Date & Time
Purpose:
To specify the date and time.
Va l u e s :
Panel Language English*Sets the language to be used on the 
operator panel.
French
Italian
German
Spanish
Danish
Dutch
Norwegian
Swedish
Apply New SettingsAfter you change the settings, click this 
button to apply the changes.
Restart printer to apply new settingsClick this button to apply the changes.
*1  Enter 3 to put the printer in the power saver timer mode 3 minutes after it finishes a 
job. This...

440Understanding the Tool Box Menus
Paper Density
Purpose:
To specify the paper density settings.
Va l u e s :
Color Registration Adjustment
Purpose:
To  s e t  Color Registration Adjustment (individual yellow, magenta, cyan 
correction) settings. When Auto Registration Adjustment is set to On, the 
printer prints the color registration chart and adjusts the color registration by 
using the chart. Color registration adjustments need to be made during the initial 
setup of the printer or when the printer...

Understanding the Tool Box Menus441
Auto 
Registration 
AdjustmentAuto Registration 
AdjustmentOffDoes not perform color 
registration automatically.
On
*Performs color registration 
automatically.
Manual 
Registration 
Adjustments
*1
Auto CorrectClick Star t to perform color 
registration automatically.
Print Color Regi ChartClick Star t to print a color 
registration chart.
Registration 
AdjustmentsPY(Process 
Yellow)-9 to +9Sets lateral (perpendicular to 
paper feed direction) and 
process (paper feed...

442Understanding the Tool Box Menus
Adjust Altitude
Purpose:
To specify the altitude of the location where the printer is installed. 
The method for charging the photo conductor varies with barometric pressure. 
Adjustments are performed by specifying the altitude of the location where the 
printer is being used.
Va l u e s :
Reset Defaults
Purpose: 
To initialize wired network data stored in non-volatile memory (NVM). After 
executing this function and rebooting the printer, all wired network settings...

Understanding the Tool Box Menus443
Non-Dell Toner
 NOTICE: Using a non-Dell toner cartridge may severely damage your printer. 
The warranty does not cover damages caused by using non-Dell toner cartridges.
Purpose:
To use toner cartridge of another manufacturer.
Va l u e s :
Initialize Print Meter
Purpose:
To initialize the Print Meter. When the print meter is initialized, the meter count 
is reset to 0.
Va l u e s :
Tray Settings
Purpose:
To specify the paper types and sizes for the standard 250-sheet...

444Understanding the Tool Box Menus
Tray 1 Paper Type Plain*Sets the type of paper loaded in the 
standard 250-sheet tray.
Plain Thick
Covers
Covers Thick
Label
Envelope
Recycled
Letterhead
Preprinted
Prepunched
Color
Plain - Side 2
Plain Thick - Side 2
Recycled - Side 2
Color - Side 2
Tray 1 Paper Size A4
*Sets the size of paper loaded in the 
standard 250-sheet tray.
A5
B5
Letter
Folio
Legal
Executive
Envelope #10
Monarch
Monarch Landscape
DL
DL Landscape
C5
Custom Size
 

Understanding the Tool Box Menus445
Tray 1 Custom Size 
- Y127–355 mm
(5.0-14.0 inch) Sets the length of custom size paper 
loaded in the standard 250-sheet tray. 
297 mm
* (11.7 inch) 
Tray 1 Custom Size 
- X77–215 mm
(3.0–8.5 inch)Sets the width of custom size paper 
loaded in the standard 250-sheet tray.
210 mm
* (8.3 inch)
Tray 1 Display 
PopupOn
* Displays a popup message that prompts 
the user to set Paper Type and Paper 
Size when the paper is loaded in the 
standard 250-sheet tray.
Tray 2 Paper...

446Understanding the Tool Box Menus
TCP/IP Settings
Purpose:
To configure TCP/IP settings.
Va l u e s :
Apply New SettingsAfter you change the settings, click this 
button to apply the changes.
Restart printer to apply new settingsClick this button to restart the printer and 
apply the changes.
*1 This item is available only when the optional 250-sheet feeder is installed.
IP Address 
ModeAutoIP*Automatically sets the IP address.
A random value in the range of 169.254.1.0 to 
169.254.254.255 that is not...

Understanding the Tool Box Menus447
Network Settings
 NOTE: Network Settings is not available when the printer is connected using a 
USB cable.
Purpose:
To configure the setup of the printer using your web browser. 
Va l u e s :
Copy Defaults
Purpose:
To create your own copy settings.
Va l u e s :
Gateway AddressManually sets the gateway address.
It is specified using the format nnn.nnn.nnn.nnn. Each 
octet that makes up nnn.nnn.nnn.nnn is a value in the 
range of 0 to 254. 127 and any value in the range...

448Understanding the Tool Box Menus
Color Black & WhitePrints in black and white mode.
Color
*Prints in color mode. 
Select Tray Tray 1
* The paper is fed from the standard 250-
sheet tray. 
Tray 2
*1The paper is fed from the optional 250-
sheet feeder.
SSFThe paper is fed from the single sheet 
feeder.
SSF Paper Size A4
*Sets the document size loaded in the single 
sheet feeder. 
A5
B5
Letter
Folio
Legal
Executive
Envelope #10
Monarch
DL
C5