DELL 1350cnw User Manual

							Loading Paper47
7Before loading the print media, flex the sheets back and forth, and then 
fan them. Straighten the edges of  the stack on a level surface.
8Load print media on the MPF with the top edge first and with the 
recommended print side facing up.
9Adjust the width guides until they re st lightly against the edges of the 
stack of print media.
 
						

							48Loading Paper
10Slide the length guide towards the printer until it touches the print media.
 NOTE: Depending on the size of print media, first slide the length guide 
backward until it stops, and then slide the MPF extension until it touches print 
media.
 
						

							Loading Paper49
11Insert the PSI into the printer and then align the PSI to the marking on 
the paper tray.
12Select the paper type from the printer driver if the loaded print media is 
not standard plain paper. If a user-specified print media is loaded in the 
MPF, you must specify the paper size  setting by using the printer driver.
 
						

							50Loading Paper
Loading Print Media in the Priority Sheet Inserter 
(PSI)
1Open the front cover.
2Slide the PSI forward, and then align the PSI to the marking on the paper 
tray.
3Before loading the print media, flex  the sheets back and forth, and then 
fan them. Straighten the edges of the stack on a level surface.
 
						

							Loading Paper51
4Load print media on the PSI with the top edge first and with the 
recommended print side facing up.
5Adjust the width guides until they rest lightly against the edges of the 
stack of print media.
6Select the paper type from the printer driver if the loaded print media is 
not standard plain paper. If a user-specified print media is loaded in the 
PSI, you must specify the paper size  setting by using the printer driver.
 
						

							52Loading Paper
 
						

							Installing Printer Drivers on Computers Running Windows
8
Installing Printer Drivers on 
Computers Running Windows
Identifying Printer Driver  Pre-install Status (For 
Network Connection Setup)
Before installing the printer driver  on your computer, print the printer 
settings page to check the IP address of your printer.
The Operator Panel
1Press the   (Menu) button.
2Ensure that Report/List appears, and then press the   button.
3Ensure that Printer Setting appears, and then press the   button.
The printer settings page is printed.
4Find the IP address under Network (Wired/Wireless) on the printer 
settings page.
If the IP address is 
0.0.0.0, wait for a few minutes to resolve the IP 
address automatically, and then prin t the printer settings page again.
If the IP address is not resolved automa tically, see Assigning an IP Address 
(for IPv4 mode) on page 39.
The Tool Box
 NOTE: 
1
Click Start All Programs Dell Printers Dell 1350cnw Color 
Printer
 Tool Box.
 NOTE: When multiple printer drivers are installed on your computer, the 
Select Printer  window opens. In this case, cl ick the name of Dell 1350cnw 
Color Printer listed in Printer Name , and then click OK.
The Tool Box opens.
 
						

							54Installing Printer Drivers on Computers Running Windows
2Select TCP/IP Settings from the list on the left side of the page.
The 
TCP/IP Settings page appears.
If the IP address shows  0.0.0.0 (the factory default) or 169.254.xx.xx , 
an IP address has not been assigned. To assign one for your printer, see 
Assigning an IP Address (f or IPv4 mode) on page 39.
Disabling the firewall before installing your printer
 NOTE: For Windows XP, Service Pack 2 or 3 must be installed.
If you are running one of the followin g operating systems, you must disable 
the firewall before installing  the Dell printer software:
•Windows 7
•Windows Vista
• Windows Server 2008 R2
• Windows Server 2008
•Windows XP
1Click Start Help and Support.
 NOTE: For Windows Server 2008 R2 and Wi ndows 7 operating systems, if you 
use  Online Help , switch to Offline Help  on Windows Help and Support  
window.
2In the Search box, type firewall and then press Enter.
In the list, click 
Turn Windows Firewall on or off and then follow the 
instructions on the screen.
Enable the firewall after the installati on of the Dell printer software is 
complete.
Inserting the Drivers and Utility CD
1Insert the Drivers and Utilities CD into your computer to start Easy Setup 
Navigator.
 NOTE: If the CD does not automatically launch, click Start All Programs 
(for Windows Vista and Windows 7)  
Accessories (for Windows Vista and 
Windows 7)
 Run, and then type D:\setup_assist.exe (where D 
is the drive letter of  your CD), and then click 
OK.
 
						

							Installing Printer Drivers on Computers Running Windows55
Direct Connection Setup
For installing host-based printer driver
1Click Software Installation.
2Select Personal Installation, and then click Next.
3Follow the on-screen instructions to  connect the computer and the printer 
with a USB cable, and th en turn the printer on.
The Plug and Play installation starts  and the installation software proceeds 
to the next page automatically.
 NOTE: If the installation software does not automatically proceed to the next 
page, click  Install. 
4Click Finish to exit the wizard when the Congratulations! screen appears. 
If necessary, click 
Print Test Page to print a test page.
USB Printing
A personal printer is a printer attached  to your computer or a print server 
using a USB. If your printer is attach ed to a network and not your computer, 
see Network Connection Setup on page 58.
For installing XML Paper Spec ification (XPS) printer driver
 NOTE: Download and install the XPS printer driver at  support.dell.com/support
 
NOTE: XPS driver is supported on the following operating systems: Windows 7, 
Windows 7 64-bit Edition, Windows Vista,  Windows Vista 64-bit Edition, Windows 
Server 2008 R2, Windows Server 2008,  and Windows Server 2008 64-bit Edition.
Windows Vista or Windows Vista 64-bit Edition
1Extract the zip file you downloaded to your desired location.
2Click Start Control Panel Hardware and Sound Printers.
3Click Add a printer.
4Click Add a local printer.
5Select the port connected to this product, and then click Next.
6Click Have Disk to display the Install From Disk dialog box.
7Click Browse, and then select the extracted folder in step 1.
 
						

							56Installing Printer Drivers on Computers Running Windows
8Click OK.
9Select your printer name and click Next. 
10To change the printer name, enter the printer name in the Printer name 
box. To use this printer as the de fault printer, select the check box 
displayed under the 
Printer name. Click Next.
Installation starts.
If the 
User Account Control dialog box appears, click Continue.
 NOTE: If you are an administrator on the computer, click  Continue; otherwise, 
contact your administrator to continue the desired action.
11As the driver installation is completed, click Print a test page to print a test 
page.
12Click Finish.
Windows Server 2008 or Windows Server 2008 64-bit Edition
 NOTE: You must log in as an administrator.
1Extract the zip file you downloaded to your desired location.
2Click Start Control Panel Hardware and Sound Printers.
3Click Add a printer.
4Click Add a local printer.
5Select the port connected to  this product, and then click Next.
6Click Have Disk to display the Install From Disk dialog box.
7Click Browse, and then select the extracted folder in step 1.
8Click OK.
9Select your printer name and click Next. 
10To change the printer name, enter the printer name in the Printer name 
box.
To use this printer as the default printer, select the 
Set as the default 
printer
 check box. Click Next.
Installation starts.