DELL 1350cnw User Manual
Have a look at the manual DELL 1350cnw User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 327 Dell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Clearing Jams277 22 Clearing Jams Careful selection of appropriate print media and proper loading allow you to avoid paper jams. See Print Media Guidelines on page 155 for more information. NOTE: Before buying large quantities of any print media, it is recommended that you try a sample first. Avoiding Jams • Use only recommended print media. See Print Media Guidelines on page 155 for more information. • See Loading Print Media in the Mult ipurpose Feeder (MPF) on page 166 and Loading Print Media in the Priority Sheet Inserter (PSI) on page 173 to load print media properly. • Do not overload the print media sources. Ensure that the stack print media height does not exceed the ma ximum height indicated by the line with an arrow on each width guide. • Do not load wrinkled, creased, damp, or curled print media. • Flex, fan, and straighten print media before you load it. If a jam occurs with print media, try feeding one sheet at a time through the MPF or the PSI. • Do not use print media that you have cut or trimmed yourself. • Do not mix print media sizes, weights, or types in the same print media source. • Ensure that the recommended print side is face up when you insert the print media. • Keep print media stored in an ac ceptable environment. For more information, see Storing Print Media on page 162. • Do not remove the PSI during a print job. • Ensure that all cables that connect to the printer are correctly attached. • Over tightening the guides may cause jams.
278Clearing Jams Identifying the Location of Paper Jams CAUTION: Do not attempt to clear any jams us ing tools or instruments. This may permanently damage the printer. The following illustration shows where paper jams may occur along the print media path. 1 Output Tray 2 Tr a n s f e r B e l t 3 Fu s e r R e l e a s e L e v er 4 Rear Cover 5 Front Cover 6 Multipurpose Feeder (MPF) 1 2 3 65 4
Clearing Jams279 Clearing Paper Jams From the Front of the Printer CAUTION: Before performing any of the following procedures, read and follow the safety instructions in your Product Information Guide. NOTE: To resolve the error displayed on the oper ator panel, you must clear all print media from the print media path. 1Pull the PSI out. 2Remove any paper jammed from the front of the printer. 3Replace the PSI in the printer.
280Clearing Jams CAUTION: Do not use excessive force on the tray. Doing so could damage the tray or the inside of the printer. Clearing Paper Jams From the Back of the Printer CAUTION: Before performing any of the following procedures, read and follow the safety instructions in your Product Information Guide. CAUTION: To prevent electric shock, always turn off the printer and disconnect the power cable from the grounded outlet before performing maintenance. CAUTION: To avoid burns, do not clear paper ja ms immediately after printing. The fuser becomes extremely hot during use. NOTE: To resolve the error displayed on the o perator panel, you must clear all print media from the print media path. 1Push the rear cover release handle and open the rear cover. 2Lift up the fuser release levers.
Clearing Jams281 3Remove any paper jammed from the back of the printer. 4Lower the fuser release levers to their original position. 5Close the rear cover.
282Clearing Jams Clearing Paper Jams From the Output Tray CAUTION: Before performing any of the following procedures, read and follow the safety instructions in your Product Information Guide. CAUTION: To prevent electric shock, always turn off the printer and disconnect the power cable from the grounded outlet before performing maintenance. CAUTION: To avoid burns, do not clear paper ja ms immediately after printing. The fuser becomes extremely hot during use. NOTE: To resolve the error displayed on the o perator panel, you must clear all print media from the print media path. 1Push the rear cover release handle and open the rear cover. 2Lift up the fuser release levers.
Clearing Jams283 3Remove any paper jammed from the back of the printer. If no paper is found in the paper path, then remove any paper jammed out of the output tray. 4Lower the fuser release levers to their original position. 5Close the rear cover.