DELL 1135n User Manual

Transparency?
Envelope ?
Preprinted ?
Cotton ?
Recycled ??
Archive ??
(?: supported, Blank: not supported)
The  media types are shown in the  Printing Preferences.  This paper type option allows  you to  set  the type of paper to
be loaded in the tray. This setting  appears in the list, so that  you can  select it.  This will let  you get  the best quality
printout.  If  not, the desired print  quality may not be achieved.
Plain : Normal plain  paper. Select this type if your  machine is monochrome and...

Weight: The  weight of the envelope  paper should not exceed  90 g/m2 otherwise, jam  may occur.
Construction: Prior  to  printing, envelopes should lie flat with less than  6 mm  curl,  and  should not contain air.
Condition: Envelopes should not be wrinkled,  nicked,  nor damaged.
Temperature: Use  envelopes  that  are compatible with the heat and  pressure  of the machine during
operation.
Use  only  well-constructed envelopes with sharp-and  well-creased folds.
Do not use stamped envelopes.
Do not...

°F).
Arrangement: Only use labels with no exposed backing between  them. Labels  can  peel  off sheets  that  have
spaces between  the labels,  causing serious jams.
Curl: Prior  to  printing, labels must  lie flat with no more  than  13 mm  of  curl  in any direction.
Condition: Do not use labels with wrinkles, bubbles,  or other indications  of separation.
Make sure  that  there is no exposed adhesive  material between  labels.  Exposed  areas can  cause labels to  peel  off
during printing, which can...

Setting the paper size and type
After loading paper in the paper tray, set  the paper size and  type using  the control panel.  These settings will apply to
copy  and  fax modes.  For  computer  printing, select the paper size and  type in the application  program  you use on your
computer  (See Opening  printing preferences
).
The  settings made from  the machine driver  override the settings on the control panel.
Setting the paper size
1. Press  Menu () on the control panel.
2. Press  the left/right...

If  you are using  A5 paper, fold  the output tray. Otherwise, printed pages might be mis -aligned or jammed.
Stacking papers firmly
If  you use the machine in a  humid area,  or you are using  the damp print  media caused by a  use a  print  media that  is
damp because  of high humidity,  the print -outs on the output tray  may be curled and  may not be stacked  properly.
In this case,  you can  set  the machine to  use the Paper  Stacking function to  let  print -outs be stacked  firmly.  But,
using...

Network setup
This chapter gives  you step-by-step instructions for setting  up  the network connected machine and  software.
This chapter includes:
Network  environment
Introducing useful  network programs
Using a  wired network
Installing network connected machine’s  driver
IPv6  Configuration
Network environment
You  need  to  set  up  the network protocols on the machine to  use it  as your  network machine.  You  can  set  up  the basic
network settings through the machine's  control panel.
The...

Printing Network Configuration report
You  can  print  a  Network Configuration Report  from  the machine’s  control panel that  will show the current
machine’s  network settings. This will help you to  set  up  a  network and  troubleshoot problems.
1. Press   Menu () on the control panel.
2. Press  the left/right  arrow until  Network appears and  press   OK.
3. Press  the left/right  arrow until  Network Info. appears and  press   OK.
4. Press  the left/right  arrow until  Yes appears and  press...

1. Insert the Printer  Software CD-ROM provided  with your  machine.  When  the driver  CD runs automatically,
close  that  window.
2. Start Windows Explorer  and  open the X  drive  (X represents your  CD-ROM drive).
3. Double -click  Application > SetIP .
4. Double -click   Setup.exe to  install this program.
5. Select a  language,  then  click   Next.
6. Follow the instructions in the window  and  complete  the installation.
Starting the program
1. Connect your  machine to  the network with a  network...

The  following instructions may vary for your  model.
1. Connect your  machine to  the network with a  network cable.
2. Insert the Installation CD-ROM,  and  open the disk  window, select MAC_Installer > MAC_Printer  > SetIP  >
SetIPapplet.html .
3. Double  click  the file and   Safari will automatically open, then  select  Trust.  The  browser  will open the
SetIPapplet.html  page  that  shows  the printer’s name and  IP  address information.
4. Highlight the printer information  row  and  select the...

Installing network connected machine’s driver
Windows
You  can  set  up  the machine driver, follow  the steps below.
This is recommended for most users. All components  necessary  for machine operations will be installed.
1. Make sure  that  the machine is connected to  the network and  powered on.
2. Insert the supplied  software CD into your  CD/DVD drive.
The  software CD should automatically run  and  an installation window  appear.
If  the installation window  does  not appear,  click  Start and...