D-Link Router DWR-921 User Manual

							16
D-Link DWR-921 User Manua\f
Section 3 - Confi\buration
The defau\ft settin\b of \uPPPoE is 1492.
The device wi\f\f automatica\f\fy reconnect to your PPPoE 
connection automatica\f\fy.
Max\fmum Transm\fss\fon 
Un\ft (MTU):
Auto-reconnect:  
						

							17
D-Link DWR-921 User Manua\f
Section 3 - Confi\buration
PPTP
Choose this Internet connection if your ISP provides you with a PPTP account. After modifyin\b any settin\bs, c\fick  Save Sett\fngs to save your chan\bes.
Choose Static IP on\fy if your ISP assi\bns you an IP address. 
Otherwise, p\fease choose Dynamic IP.
Enter the information provided by your ISP. 
(On\fy app\ficab\fe for Static IP PPTP.)
Enter the information provided by your ISP. 
(On\fy app\ficab\fe for Static IP PPTP.)
Enter the information provided by your ISP. 
(On\fy app\ficab\fe for Static IP PPTP.)
IP address of PPTP server.
User/account name that your ISP provides to you for PPTP dia\f-
up.
Password that your ISP provides to you for PPTP dia\f-up.
Re-enter your password for verification.
Choose Always-on when you want to estab\fish PPTP 
connection a\f\f the time. If you choose Connect-on-demand, 
the device wi\f\f estab\fish a PPT\uP connection when \foca\f users \u
want to surf Internet, and disconnect if there is no traffic after 
the time period defined by the Max\fmum Idle T\fme settin\b.
Address Mode:
 
PPTP IP Address:
 
PPTP Subnet Mask:
 
PPTP Gateway IP Address:
PPTP Server IP Address: Username:
Password:
Ver\ffy Password:
Reconnect Mode:  
						

							18
D-Link DWR-921 User Manua\f
Section 3 - Confi\buration
The time of no activity to disconnect your PPTP session. S\uet it 
to zero or choose A\fways-on to disab\fe this feature.
 
Max\fmum Idle T\fme:  
						

							19
D-Link DWR-921 User Manua\f
Section 3 - Confi\buration
L2TP
Choose this Internet connection if your ISP provides you with an L2TP account. After modifyin\b any settin\bs, c\fick  Save Sett\fngs to save your chan\bes.
Choose Static IP on\fy if your ISP assi\bns you an IP address. 
Otherwise, p\fease choose Dynamic IP. 
Enter the information provided by your ISP. 
(On\fy app\ficab\fe for Static IP L2TP.)
Enter the information provided by your ISP. 
(On\fy app\ficab\fe for Static IP L2TP.)
Enter the information provided by your ISP. 
(On\fy app\ficab\fe for Static IP L2TP.)
IP address of L2TP server. 
User/account name that your ISP provides to you for L2TP dia\f-
up.
Password that your ISP provides to you for L2TP dia\f-up.
Fi\f\f in with the same p\uassword in Password fie\fd.
Choose A\fways-on when you want to estab\fish L2TP 
connection a\f\f the time. Choose Connect-on-demand the 
device wi\f\f estab\fish L2TP \uconnection when \foca\f users \uwant to 
surf Internet, and disconnect if no traffic after time period of 
Maximum Id\fe Time.
The time of no activity to disconnect your L2TP session. S\uet it 
to 0 or choose A\fways-on to disab\fe this feature.
Address Mode:
 
L2TP IP Address:  
L2TP Subnet Mask:  
L2TP Gateway IP Address:
L2TP Server IP Address: Username:
Password:
Ver\ffy Password:
Reconnect Mode:
Max\fmum Idle T\fme:  
						

							20
D-Link DWR-921 User Manua\f
Section 3 - Confi\buration
Choose whether the DWR\u-921 shou\fd on\fy use \u4G networks, 
3G networks, or use Auto Mode to automatica\f\fy se\fect a 
network.
Fi\f\f in a name to identify the fo\f\fowin\b 3G/4G confi\buration. 
Se\fect your country and te\fecom to automatica\f\fy fi\f\f in some 
of the required settin\bs.
(Optiona\f) Fi\f\f in on\fy if requested by ISP.
(Optiona\f) Fi\f\f in on\fy if requested by ISP.
Enter the number to be dia\fed.
Se\fect PAP, CHAP, or Auto detection. The defau\ft authentication 
method is Auto. 
(Optiona\f) Enter the APN information.
Enter the PIN associated with your SIM card.
Se\fect Auto or Manua\f to decide whether the r\uouther shou\fd 
reconnect to your 3G/4G network automatica\f\fy or manua\f\fy.
Set the maximum time y\uour connection can be id\fe be\ufore 
disconnectin\b. Set it to 0 or choose Auto in Reconnect Mode 
to disab\fe this feature.
Prefer Serv\fce Type:
Account/Profile Name: Country/Telecom:  
Username:
Password:
D\faled Number: Authent\fcat\fon:  
APN:
P\fn Code:
Reconnect Mode:
Max\fmum Idle T\fme:  
3G/4G
Choose this Internet connection if you a\fready use a SIM card for 3G/4G Internet service from your mobi\fe service company. The fie\fds here may 
not be necessary for your connection. The information on this pa\be shou\fd on\fy be used if required by your service provider. After modifyin\b any 
settin\bs, c\fick Save Sett\fngs to save your chan\bes.  
						

							21
D-Link DWR-921 User Manua\f
Section 3 - Confi\buration
(Optiona\f) Fi\f\f in if provided by your ISP. If not, keep the defau\ft 
va\fue.
(Optiona\f) Fi\f\f in if provided by your ISP. If not, keep the defau\ft 
va\fue.
Se\fect Disab\fe or Use Pin\b dependin\b on the\u settin\bs required 
by your ISP. If you se\fect Use Pin\b, set the pin\b interva\f and the 
IP address to pin\b.
Activate this feature to use the Ethernet WAN port as an 
additiona\f LAN port.
Enab\fin\b this option \uwi\f\f a\f\fow you to connect when roamin\b. 
Note: Roamin\b connections may incur additiona\f f\uees from 
your service provider.
Enab\fin\b this wi\f\f sen\ud periodic DNS checks to make sure your 
connection is a\five, and if the check f\uai\fs, it wi\f\f restart your 3G 
connection to resume connectivity.
Enab\fin\b this option \uwi\f\f disab\fe the NAT function of the DWR-
921, a\f\fowin\b it to act as a \fink for your devices to your Internet 
connection, but without routin\b functions.
Pr\fmary DNS Server:
Secondary DNS Server: Keep Al\fve:
Br\fdge Ethernet Ports: Roam\fng:
DNS Check:
NAT D\fsable:  
						

							22
D-Link DWR-921 User Manua\f
Section 3 - Confi\buration
W\freless Sett\fngs
This section wi\f\f he\fp you to manua\f\fy confi\bure the wire\fess settin\bs of your router. P\fease 
note  that  chan\bes  made  on  this  section  may  a\fso  need  to  be  dup\ficated  on  your  wire\fess 
devices and c\fients.
The Wire\fess Settin\bs pa\be a\f\fows you to confi\bure how your router connects to the Internet. 
There are severa\f ways to set up your wire\fess connection. 
You can c\fick on the  W\freless Connect\fon Setup W\fzard  button to start a wizard that wi\f\f \buide 
you throu\bh settin\b up your wire\fess settin\bs.
If you want to manua\f\fy confi\bure your settin\bs, c\fick the  Manual W\freless Connect\fon Setup 
button and skip to “Manua\f Wire\fess Connection Setup” on pa\be 24.
You can a\fso set up a wire\fess connection to a device automatica\f\fy, or confi\bure your router 
automatica\f\fy throu\bh Windows by c\fickin\b the  W\f-F\f Protected Setup button. This is described 
in “Wi-Fi Protected Setup (WPS)” on pa\be 29.
This wizard wi\f\f \buide you throu\bh a step-by-step process to confi\bure your D-Link router’s 
wire\fess .
C\fick Next to continue.
Note:  Whi\fe usin\b the wizard, you can c\fick  Prev to \bo back to the previous pa\be or you can 
c\fick Cancel to c\fose the wizard.
W\freless Connect\fon Setup W\fzard  
						

							23
D-Link DWR-921 User Manua\f
Section 3 - Confi\buration
Enter a name for your wire\fess network, then c\fick Next to continue.
Se\fect a \feve\f of wire\fess security to use, then c\fick Next to continue.
If  you  chose  BEST  or  BETTER,  se\fect  whether  to  use  TKIP  or  AES  encryption,  then  enter  a 
password to use for your wire\fess network. It is recommended that you use AES if your wire\fess 
computers and devices support it, as it is more secure. C\fick Next to continue.
If you chose GOOD, se\fect whether to use a HEX or ASCII password, then enter a password 
to  use  for  your  wire\fess  network.  If  you  choose  HEX,  you  wi\f\f  need  to  enter  a  10  or  26  di\bit 
password usin\b on\fy hex characters (0-9, A-F). If you choose ASCII, the password can be up to 
5 or 13 a\fphanumeric characters. C\fick Next to continue.
This comp\fetes the Wire\fess Connection Setup Wizard. C\fick  Save to save your chan\bes and 
reboot the router.  
						

							24
D-Link DWR-921 User Manua\f
Section 3 - Confi\buration
Manual W\freless Connect\fon Setup
To set up your wire\fess connection manua\f\fy, c\fick Manual W\freless Connect\fon Setup.  
						

							25
D-Link DWR-921 User Manua\f
Section 3 - Confi\buration
Se\fect this checkbox to enab\fe wire\fess access. When you set 
this option, the fo\f\fowin\b parameters take effect.
A\fso known as the SSID (Service Set Identifier), this is the n\uame 
of your Wire\fess Loca\f Area Network (WLAN). Enter a name 
usin\b up to 32 a\fphanumeric characters. The SSID is case-
sensitive.
B/G m\fxed: Enab\fe this mode if\u your network contains a mix of 
802.11b and 802.11\u\b devices.
N only: Enab\fe this mode if \uyour network on\fy has 802.11n \u
devices.
B/G/N m\fxed: Enab\fe this mode if \uyou have a mix of 802.11n\u, 
802.11\b, and 802.11b c\fien\uts.
Enab\fin\b this feature wi\f\f a\f\fow the router to scan for the best 
channe\f to use automatica\f\fy.
A wire\fess network uses specific chan\une\fs in the wire\fess 
spectrum to hand\fe communication between c\fients. Some 
channe\fs in your area may experience interference from 
other e\fectronic devices. Choose the c\fearest channe\f to he\fp 
optimize the performance and covera\be of your wire\fess 
network, or enab\fe Auto Channe\f Scan for the router to 
automatica\f\fy se\fect the best channe\f.
This settin\b determines whether the SSID\u wi\f\f be V\fs\fble or 
Inv\fs\fble to wire\fess c\fients \fookin\b for wire\fess networks. 
Settin\b this to Inv\fs\fble can increase the security of your 
network by hidin\b it, but c\fients wi\f\f need to manua\f\fy enter 
the SSID of your network to connect.
Enable W\freless:
W\freless Network Name:
 
802.11 Mode:  
Auto Channel Scan: W\freless Channel:
V\fs\fb\fl\fty Status:
W\freless Sett\fngs
This pa\be \fets you set up your wire\fess network and choose a wire\fess security mode. After modifyin\b any settin\bs, c\fick  Save Sett\fngs to save your 
chan\bes.