D-Link Router DIR-825 User Manual

66D-Link DIR-825 User Manual
Section 3 - Configuration
IPv6 in IPv4 Tunneling (Stateful)
Select IPv6 in IPv4 Tunnel from the drop-down 
menu.
Enter  the  settings  supplied  by  your  Internet 
provider (ISP). 
Enter  the  LAN  (local)  IPv6  address  for  the 
router. 
D i s p l a y s   t h e   R o u t e r ’ s   L A N   L i n k - L o c a l 
Address.
C h e c k   t o   e n a b l e   t h e   A u t o c o n f i g u r a t i o n 
feature.
Select Stateless. Refer to the previous page 
for Stateful.
Enter  the...

67D-Link DIR-825 User Manual
Section 3 - Configuration
IPv6 in IPv4 Tunneling (Stateless)
Select IPv6 in IPv4 Tunnel from the drop-down 
menu.
Enter  the  settings  supplied  by  your  Internet 
provider (ISP). 
Enter  the  LAN  (local)  IPv6  address  for  the 
router. 
D i s p l a y s   t h e   R o u t e r ’ s   L A N   L i n k - L o c a l 
Address.
C h e c k   t o   e n a b l e   t h e   A u t o c o n f i g u r a t i o n 
feature.
Select Stateful (DHCPv6) or Stateless. Refer 
to the next page for...

68D-Link DIR-825 User Manual
Section 3 - Configuration
Enter a new password for the Administrator Login Name. 
The administrator can make changes to the settings.
Enter the new password for the User login. If you login as 
the User, you can only see the settings, but cannot change 
them.
Enter a name for the DIR-825 router.
C h e c k   t o   e n a b l e   H T T P S   t o   c o n n e c t   t o   t h e   r o u t e r 
securely.
Remote management allows the DIR-825 to be configured 
from  the  Internet  by...

69D-Link DIR-825 User Manual
Section 3 - Configuration
Time Settings
Select  the  Time  Zone  from  the  drop-down 
menu.
To select Daylight Saving time manually, select 
enabled or disabled, and enter a start date and 
an end date for daylight saving time.
NTP  is  short  for  Network  Time  Protocol. 
NTP synchronizes computer clock times in a 
network of computers. Check this box to use a 
NTP server. This will only connect to a server 
on the Internet, not a local server.
Enter the NTP server or...

70D-Link DIR-825 User Manual
Section 3 - Configuration
SysLog
The Broadband Router keeps a running log of events and activities occurring on the Router. You may send these logs 
to a SysLog server on your network.
Enable Logging to 
SysLog Server:
SysLog Server IP 
Address:
Check  this  box  to  send  the  router  logs  to  a 
SysLog Server.
The address of the SysLog server that will be 
used  to  send  the  logs.  You  may  also  select 
your computer from the drop-down menu (only 
if receiving an IP...

71D-Link DIR-825 User Manual
Section 3 - Configuration
Email Settings
The Email feature can be used to send the system log files, router alert messages, and firmware update notification 
to your email address. 
Enable Email 
Notification: 
From Email 
Address:
To Email Address:
SMTP Server 
Address:
Enable 
Authentication:
Account Name:
Password:
On Log Full:
On Schedule:
Schedule:
When this option is enabled, router activity logs 
are e-mailed to a designated email address.
This  email  address  will...

72D-Link DIR-825 User Manual
Section 3 - Configuration
Use  this  option  to  save  the  current  router 
configuration settings to a file on the hard disk 
of the computer you are using. First, click the 
Save  button.  You  will  then  see  a  file  dialog, 
where you can select a location and file name 
for the settings. 
Use  this  option  to  load  previously  saved 
router  configuration  settings.  First,  use  the 
Browse  control  to  find  a  previously  save 
file  of  configuration  settings....

73D-Link DIR-825 User Manual
Section 3 - Configuration
Click on Check Now to find out if there is an 
updated  firmware;  if  so,  download  the  new 
firmware to your hard drive.
After you have downloaded the new firmware, 
click Browse to locate the firmware update on 
your hard drive.  Click Upload to complete the 
firmware upgrade.
Check Automatically  Check  Online  for 
Latest  Firmware  Version  to  have  the  router 
check  automatically  to  see  if  there  is  a  new 
firmware upgrade.
Check...

74D-Link DIR-825 User Manual
Section 3 - Configuration
Dynamic Domain Name System is a method of 
keeping a domain name linked to a changing 
IP Address. Check the box to enable DDNS.
Choose  your  DDNS  provider  from  the  drop 
down menu.
Enter the Host Name that you registered with 
your DDNS service provider.
Enter the Username for your DDNS account.
Enter the Password for your DDNS account.
Enter a time (in hours).
Displays the current connection status.
Enable Dynamic 
DNS:
Server Address:
Host...

75D-Link DIR-825 User Manual
Section 3 - Configuration
The Ping Test is used to send Ping packets to test if a 
computer  is  on  the  Internet.  Enter  the  IP  Address  that 
you wish to Ping, and click Ping.
The  results  of  your  ping  attempts  will  be  displayed 
here.
System Check
Ping Test:
Ping Results: