D-Link Router DIR-825 User Manual

56D-Link DIR-825 User Manual
Section 3 - Configuration
Static IPv6 (Stateful)
Select Static  IPv6  from  the  drop-down 
menu.
Enter the address settings supplied by your 
Internet provider (ISP). 
Enter the LAN (local)  IPv6 address  for the 
router. 
D i s p l a y s   t h e   R o u t e r ’ s   L A N   L i n k - L o c a l 
Address.
Check  to  enable  the  Autoconfiguration 
feature.
Select Stateful  (DHCPv6)  or Stateless. 
Refer to the next page for Stateless.
Enter the start IPv6 Address for the...

57D-Link DIR-825 User Manual
Section 3 - Configuration
Static IPv6 (Stateless)
Select Static  IPv6  from  the  drop-down 
menu.
Enter the address settings supplied by your 
Internet provider (ISP). 
Enter the LAN (local)  IPv6 address  for the 
router. 
D i s p l a y s   t h e   R o u t e r ’ s   L A N   L i n k - L o c a l 
Address.
Check  to  enable  the  Autoconfiguration 
feature.
Select Stateless. Refer to the previous page 
for Stateful.
Enter the Router Advertisement Lifetime (in 
minutes).
My...

58D-Link DIR-825 User Manual
Section 3 - Configuration
DHCPv6 (Stateful)
Select DHCPv6  from  the  drop-down 
menu.
Select either Obtain DNS server address 
automatically  or Use  the  following  DNS 
Address.
Enter  the  primary  and  secondary  DNS 
server addresses. 
Enter the LAN (local)  IPv6 address  for the 
router. 
D i s p l a y s   t h e   R o u t e r ’ s   L A N   L i n k - L o c a l 
Address.
Check  to  enable  the  Autoconfiguration 
feature.
Select Stateful  (DHCPv6)  or Stateless. 
Refer...

59D-Link DIR-825 User Manual
Section 3 - Configuration
DHCPv6 (Stateless)
Select DHCPv6  from  the  drop-down 
menu.
Select either Obtain DNS server address 
automatically  or Use  the  following  DNS 
Address.
Enter  the  primary  and  secondary  DNS 
server addresses. 
Enter the LAN (local)  IPv6 address  for the 
router. 
D i s p l a y s   t h e   R o u t e r ’ s   L A N   L i n k - L o c a l 
Address.
Check  to  enable  the  Autoconfiguration 
feature.
Select Stateless. Refer to the previous page...

60D-Link DIR-825 User Manual
Section 3 - Configuration
IPv6 over PPPoE (Stateful)
Select PPPoE from the drop-down menu.
Enter the PPPoE account settings supplied by your Internet 
provider (ISP). 
Select Static if your ISP assigned you the IP address, subnet 
mask, gateway, and DNS server addresses. In most cases, 
select Dynamic.
Enter the IP address (Static PPPoE only).
Enter your PPPoE user name.
Enter your PPPoE password and then retype the password 
in the next box.
Enter the ISP Service Name...

61D-Link DIR-825 User Manual
Section 3 - Configuration
Enable Autoconfiguration:
Autoconfiguration Type:
IPv6 Address Range Start:
IPv6 Address Range End:
IPv6 Address Lifetime:
Check to enable the Autoconfiguration feature.
Select Stateful (DHCPv6) or Stateless. Refer to the next page for Stateless.
Enter the start IPv6 Address for the DHCPv6 range for your local compute\
rs.
Enter the end IPv6 Address for the DHCPv6 range for your local computers\
.
Enter the IPv6 Address Lifetime (in minutes). 

62D-Link DIR-825 User Manual
Section 3 - Configuration
IPv6 over PPPoE (Stateless)
Select PPPoE from the drop-down menu.
Enter the PPPoE account settings supplied by your Internet 
provider (ISP). 
Select Static if your ISP assigned you the IP address, subnet 
mask, gateway, and DNS server addresses. In most cases, 
select Dynamic.
Enter the IP address (Static PPPoE only).
Enter your PPPoE user name.
Enter your PPPoE password and then retype the password 
in the next box.
Enter the ISP Service Name...

63D-Link DIR-825 User Manual
Section 3 - Configuration
Enable Autoconfiguration:
Autoconfiguration Type:
Router Advertisement  
Lifetime:
Check to enable the Autoconfiguration feature.
Select Stateful (DHCPv6) or Stateless. 
Enter the Router Advertisement Lifetime (in minutes). 

64D-Link DIR-825 User Manual
Section 3 - Configuration
6 to 4 Tunneling (Stateful)
Select 6 to 4 from the drop-down menu.
Enter  the  IPv6  settings  supplied  by  your 
Internet provider (ISP). 
Enter the primary and secondary DNS server 
addresses. 
Enter  the  LAN  (local)  IPv6  address  for  the 
router. 
D i s p l a y s   t h e   R o u t e r ’ s   L A N   L i n k - L o c a l 
Address.
C h e c k   t o   e n a b l e   t h e   A u t o c o n f i g u r a t i o n 
feature.
Select Stateful (DHCPv6) or...

65D-Link DIR-825 User Manual
Section 3 - Configuration
6 to 4 Tunneling (Stateless)
Select 6 to 4 from the drop-down menu.
Enter  the  IPv6  settings  supplied  by  your 
Internet provider (ISP). 
Enter the primary and secondary DNS server 
addresses. 
Enter  the  LAN  (local)  IPv6  address  for  the 
router. 
D i s p l a y s   t h e   R o u t e r ’ s   L A N   L i n k - L o c a l 
Address.
C h e c k   t o   e n a b l e   t h e   A u t o c o n f i g u r a t i o n 
feature.
Select Stateless. Refer to the...