D-Link Router DIR-825 User Manual

36D-Link DIR-825 User Manual
Section 3 - Configuration
This will allow you to open a single port. If you would like to open a r\
ange of ports, refer to the next page.
Enter a name for the rule or select an application 
from the drop-down menu. Select an application 
and click 

37D-Link DIR-825 User Manual
Section 3 - Configuration
This will allow you to open a single port or a range of ports.
Port Forwarding
Enter a name for the rule or select an application 
from the drop-down menu. Select an application 
and click 

38D-Link DIR-825 User Manual
Section 3 - Configuration
Enter  a  name  for  the  rule.  You  may  select  a  
pre-defined  application  from  the  drop-down 
menu and click 

39D-Link DIR-825 User Manual
Section 3 - Configuration
QoS Engine
This option is disabled by default. Enable this option for 
better  performance  and  experience  with  online  games 
and other interactive applications, such as VoIP.
This option is enabled by default when the QoS Engine 
option  is  enabled.  This  option  will  allow  your  router  to 
automatically determine the uplink speed of your Internet 
connection.
This displays the detected uplink speed.
The  speed  at  which  data  can  be...

40D-Link DIR-825 User Manual
Section 3 - Configuration
This option is disabled by default. Enable this option for better performance and experience with online games and other 
interactive applications, such as VoIP.
This  option  is  enabled  by  default.  This  will  allow  your  router  to  automatically  determine  the  network  priority  of  running 
programs.
This option should be enabled when you have a slow Internet uplink. It helps to reduce the impact that large low priority 
network packets...

41D-Link DIR-825 User Manual
Section 3 - Configuration
Network Filters
Select Turn MAC Filtering Off, Allow MAC 
addresses  listed  below,  or Deny  MAC 
addresses listed below from the drop-down 
menu. 
Enter  the  MAC  address  you  would  like  to 
filter.
To  find  the  MAC  address  on  a  computer, 
please  refer  to  the Networking  Basics  section 
in this manual. 
Select a DHCP client from the drop-down menu 
and click 

42D-Link DIR-825 User Manual
Section 3 - Configuration
Access Control
Click the Add Policy button to start the Access 
Control Wizard. 
Add Policy:
The  Access  Control  section  allows  you  to  control  access  in  and  out  of  your  network.  Use  this  feature  as  Parental 
Controls to only grant access to approved sites, limit web access based on time or dates, and/or block access from 
applications like P2P utilities or games.
Click Next to continue with the wizard.
Access Control Wizard 

43D-Link DIR-825 User Manual
Section 3 - Configuration
Enter a name for the policy and then click Next to continue.
Access Control Wizard (continued)
Select  a  schedule  (I.E.  Always)  from  the  drop-down  menu 
and then click Next to continue.
Enter  the  following  information  and  then  click Next  to 
continue.
• Address  Type  -  Select  IP  address,  MAC  address, 
or Other Machines.
• IP Address - Enter the IP address of the computer 
you want to apply the rule to.
Select the filtering method...

44D-Link DIR-825 User Manual
Section 3 - Configuration
Access Control Wizard (continued)
Enter the rule:
 Enable - Check to enable the rule.
 Name - Enter a name for your rule.
 Dest IP Start - Enter the starting IP address.
 Dest IP End - Enter the ending IP address.
 Protocol - Select the protocol.
 Dest Port Start - Enter the starting port number.
 Dest Port End - Enter the ending port number.
To enable web logging, click Enable.
Click Save to save the access control rule.
Your  newly  created  policy...

45D-Link DIR-825 User Manual
Section 3 - Configuration
Add Website 
Filtering Rule:
Website URL/
Domain:
Website Filters
Select Allow or Deny.
Enter the keywords or URLs that you want to 
allow or block. Click Save Settings.
Website Filters are used to allow you to set up a list of allowed Web sites that can be used by multiple users through 
the network. To use this feature select to Allow or Deny, enter the domain or website and click Save Settings. You 
must also select Apply Web Filter under the...