Home > Compaq > Notebook > compaq prosignia 170 User Manual

compaq prosignia 170 User Manual

Here you can view all the pages of manual compaq prosignia 170 User Manual. The Compaq manuals for Notebook are available online for free. You can easily download all the documents as PDF.

Page 121

The PC Card is not 
formatted.For memory cards, run 
MCFORMAT in MS-DOS 
Mode to format the PC 
Card.l   
For ATA cards, run 
ATAINIT, then run 
MCFORMAT in MS-DOS 
Mode to format the PC 
Card.l   
The card is not 
supported.Contact your Compaq authorized 
dealer, reseller, or service 
provider for a list of PC Cards 
tested successfully in Compaq PC 
Card platforms.
Storage cards, such 
as SRAM, do not 
work in the 
expansion base.Use the storage card in the 
computer.
Return to the top.
 
Solving Power...

Page 122

 
Solving Screen Problems
ProblemPossible CauseSolution
Characters on 
computer display are 
dim.Computer is in direct light.Move the computer or adjust 
the screen.
The brightness control is 
not set properly.Adjust the brightness control 
by pressing the  Fn+F10
hotkeys.
You may have a screen 
saver or screen blanking 
utility installed.Press any key to refresh the 
screen.
Screen timeout was 
initiated.Press any key to light the 
screen.
System initiated Suspend 
after a user-defined 
timeout...

Page 123

External device 
connected to a USB 
connector does not 
work.The operating system 
limits external devices 
connected by USB to two 
tiers which can include no 
more than two hubs on 
the first tier and no more 
than one keyboard and 
one pointing device on 
the first or second tier.Reduce the number of 
connected external USB 
devices to no more than two 
hubs on the first tier, and no 
more than one keyboard and 
one pointing device on the 
first or second tier.
External device 
connected to USB...

Page 124

MAINTENANCE & SERVICE GUIDE
PROSIGNIA NOTEBOOK 170
INDEX PAGELEGAL NOTICEHOW TO USE THIS GUIDEPRODUCT DESCRIPTION
TROUBLESHOOTINGREMOVAL & REPLACEMENTILLUSTRATED PARTS CATALOGSPECIFICATIONS
Troubleshooting
Factory Default Settings for F10 Setup
The following tables contain the factory default settings for F10 setup \
configuration.
Initialization
Enable POST Memory TestChecked (enabled)
Keyboard Num LockUnchecked (Off)
Hard drive boot sequence 
1Hard drive in the computer MultiBay
2Hard drive in the...

Page 125

Power ManagementEnabled
While operating on battery power
Conservation LevelHigh
Level Definition 
HighSuspend Time: 3 minutes 
Hibernation Timeout: Immediate 
Drive Timeout: 1 minute 
Screen Timeout: 1 minute
MediumSuspend Time: 5 minutes 
Hibernation Timeout: 1 hour 
Drive Timeout: 2 minutes 
Screen Timeout: 3 minutes
CustomSuspend Time: disabled 
Hibernation Timeout: low battery 
Drive Timeout: always on 
Screen Timeout: always on
Security
Enable QuickLock/QuickBlankUnchecked (Disabled)
Enable Power-on...
Start reading compaq prosignia 170 User Manual

Related Manuals for compaq prosignia 170 User Manual

All Compaq manuals