Comdial LCD Speakerphone Station Users Guide

9.11 Setting Your Personal Ringing Tones
·To select one of the ringing tones,
1. PressOPTIONS.
2. PressNEXTuntil theRINGoption appears.
3. PressRING.
4. PressUPorDOWNto choose ring tone in display (a new tone will
sound at each up or down press).
5. PressEXITto return to main display.
6. PressSPEAKERto end.
9.12 Using Background Music
·To turn the music on,
1. PressOPTIONS.
2. PressMUSIC.
3. PressSET.
4. SelectSRC 1orSRC 2for the music source (the DXP system is
equipped to provide music from two sources,...

9.13 Using The IMIST Module
Impact SCS8324F-**, 8324S-**, and 8312S-** speakerphones equipped
with the optional IMIST module can support an IST device (modem,
FAX machine, industry-standard telephone, etc.) in addition to the LCD
speakerphone. Depending on system programming, the IST device may
be used to make outgoing calls and receive incoming calls.
The functionality of the IMIST module depends on the type of system
you are using.
On a DXP system, the IMIST module does not have its own extension...

9.14 Using The Caller ID Feature
The Caller ID feature allows you to view incoming call numbers before
you answer them. Incoming call numbers flash in the lower half of the
LCD. If you answer the call, the number appears in the upper half of the
LCD.
The system also stores numbers that ring on your line but receive no
answer. The system indicates that it has stored ring-no answer numbers
by causing the CID light on your telephone to flash. Pressing theCID
button allows you to view the stored numbers one...

This page remains blank intentionally. 

Operating Your Telephone
With A DSS/BLF Console
10.1 Operating Your Telephone
With A DSS/BLF Console
The IB64X, IB48X, and IB24X DSS/BLF consoles have additional
buttons and status lights that extend the memory button capability of an
adjacent companion telephone. The buttons can be programmed for
automatic dialing (speed dial) or direct station selection (DSS) with busy
lamp field (BLF) using the instructions provided previously in this guide.
When the installer assigns a DSS/BLF console to a station...

10.1.1 Accessing The Button Levels
The IB24X and IB48X DSS/BLF consoles have four levels of buttons,
quadrupling the consoles’ button capacity. The four buttons at the bottom
of each console allow you to select which button level is currently active.
To change button levels, press one of the buttons at the bottom of the
console. The leftmost button activates level 1, the next button activates
level 2, etc. A light beside the appropriate button lights to indicate which
level is currently active.
ib48x...

Troubleshooting
Your Telephone
Symptom Possible Cause
INTERCOM light flashing. Your messaging is set. Press
INTERCOM, then dial # 02 and hang
up.
HOLD light flashing with no
line on hold.Another telephone has activated your
message waiting light. Press
INTERCOM and then press HOLD to
retrieve message. This action will call
party who activated light. Once you
have received message, party who
activated light (while still talking to
you) must press INTERCOM to turn
off the light.
MUTE light on. MUTE is...

This page remains blank intentionally. 

Index
A Section
AccessingLines ....................................... 3–1
AdjustingDisplayContrast .............................. 9–1
AdjustingTheTelephonePedestal........................ 1–12
AnsweringASOHVA................................... 2–2
AnsweringCalls....................................... 2–1
AutomaticRedialFeature.......................... 3–4—3–5
B
BackgroundMusic..................................... 9–9
Blocking Voice-Announce Calls.......................... 9–1...

DoNotDisturb,Setting ................................. 9–4
DSS/BLFConsole .................................... 10–1
DSS/BLFConsole,AccessingButtonsLevels .............. 10–2
F
ForwardingCalls ...................................... 2–3
Full-Duplex Speakerphone, Using A....................... 1–7
G
GroupListening ....................................... 9–3
H
HoldingCalls ......................................... 4–1
I
IMISTModule ....................................... 9–10
IncomingCalls,Diverting...