Comdial Executech Multiline Key Telephone Instructions Manual

AREA PAGING (requires external paging unit) 
One-key Access (Pa 
To Key Service Unit f ing Unit Connects 
ine Port) 
. Press line key dedicated to paging 
. Lift handset 
. Dial access code for zone paging equipment (if required) 
. Make announcement 
Dial Access (Pa in Unit Connects 
To Key Service ni Station Port)  17 
. Press ITCM 
. 
Lift handset 
. 
Press memory key (or dial an access code) 
. Make announcement 
ALL-CALL AND ZONE PAGING 
To page 
. 
Press ITCM and lift handset 
. Dial zone number -...

NOTE: An autodial number can also be programmed as a 
secondary finction at every DSSIBLF memory location. 
See Automatic Dialing instructions for details. 
To voice signal a DSS number 
. Lift handset 
. Press memory key 
. Voice announce 
NOTE: If you are transferring a call, the outside line is 
automatically placed on hold when a DSS key is pressed. 
To tone signal a DSS number 
. Lift handset 
. Press memory key 
. 
Press ITCM. When station answers, two-way conversation 
can take place 
NOTE: The...

PULSE/TONE SWITCHING 
If your tele 
P hone service is pulse (rotary) and you must 
convert to one while dialing 
. Press # (System will switch back to pulse dialing when call 
is terminated) 
NOTE: PulselTone switching can be programmed into 
memory keys by pressing # during number storage. 
MESSAGE WAITING 
(The MW-message waiting-light, adjacent to the HOLD 
key, is controlled by designated stations or one central 
message desk) 
To receive messages 
. 
Lift handset 
. Press ITCM HOLD. Connection to...

To cancel call forward 
. 
Press ITCM 
. 
Dial 55 
NOTE: For each call received during call forward, a ring 
reminder (short tone burst) will be heard. 
AUTOMATIC CALL-BACK 
To arrange for the system to call back when a busy station 
becomes idle 
. 
Make intercom call. Hear busy signal 
. Dial 88 
. 
Hang up (Calling station will ring when called station be- 
comes idle) 
To answer call-back 
. Lift handset (called station will ring. Call-back is cancelled if 
handset is not lifted) 
To cancel automatic...

To queue for a line group 
. 
Lift handset 
. Press ITCM. Listen for dial tone 
. 
Dial trunk group access code (9, 82, 83, or 84). Hear busy 
tone 
. Dial 88 
. Hang up handset 
To 
answer line queuing ring-back 
. Lift handset, hear dial tone on line, and place call 
To cancel queuing 
. 
Press ITCM 
. Dial 87 
EXECUTIVE OVERRIDE 
(Only available to certain stations) 
To break into conversation at another station 
. Make intercom call. Hear busy tone 
. 
Dial 77. (Warning tone sounded at called...

PERSONAL RINGING TONES 
(Allows selection of one to four 
distinctive tones for ring signals) 
To program tones 
. Press ITCM 
. Dial 66, 67, 68, or 69 (selects tones 1, 2, 3, or 4) 
CALL WAITING (with camp-on) 
To send a call waiting tone and wait on line for an answer 
(camp-on) 
. Place intercom call 
. 
Hear busy tone 
. Dial 89 (called party hears tone) 
. 
When called station becomes available, ringing will be begin 
at called station 
To answer a call waiting tone 
. Hear tone (short tone burst...

THE OPTIONAL FEATURES 
SPEAKERPHONE OPERATION 
Placing a call 
. 
Press a line key 
. 
Dial number or press memory key 
. 
When party answers, speak toward the station 
Answering a call 
. Press a line key 
. Speak toward the station 
Ending a call 
. Press MONITOR 
Muting a call 
While on hook to prevent other party from hearing. 
. Press MUTE. (Monitor light will flash) 
To re-enable microphone 
. 
Press MUTE. (Monitor light stops flashing) 
To switch from speakerphone to handset 
. 
Lift handset 
To...

Frequently Called Numbers  

This manual has been developed by Comdial Corporation (the “Com- 
pany”) and is intended for the use of its customers and service person- 
nel. The information in this manual is subject to change without notice. 
While every effort has been made to eliminate errors, the Company dis- 
claims liability for any difficulties arising for the interpretation of the in- 
formation contained herein. 
The information contained herein does not purport to cover all details 
or variations in equipment nor to provide...

COMDUAL. 
Charlottesville, Virginia 22906-7266 
-.- 
Lwld~- 036 - 
Printed in U.S.A. 
GCA 70-078.01 
August, 1987 
(minor editing 10/99) 
(format change g/90)