Comdial Dxp Proprietary Single Line Telephone Station Users Guide

Programming
Your Telephone
9.1 Storing Speed Dial Numbers
·To store an outside number as a speed dial number,
1. Lift handset and listen for intercom dial tone.
2. DialSS1.
3. Dial0–9to choose storage location.
4. Dial01–16to select line groups 1–16, or dial00to let system
select line.
5. Dial number to be stored (up to 16 digits long—includeSand
#if needed). To store hookflash in a number sequence, press
TA P ;pressHOLDto store pause (only if needed).
6. PressTRANSFER/CONFERENCEto store number.
7. To...

This page remains blank intentionally. 

Troubleshooting
Your Telephone
Symptom Possible Cause
INTERCOM light flashing Your messaging is set. Lift handset, then
dial # 02 and hang up.
Station is ringing with ringer off.
MUTE light on. MUTE is activated. To cancel, press
MUTE.
Error Tone
(three steady tones)May occur when incorrect buttons are
pressed during speed dial programming.
For example, if a button has a line
assigned to it, or was not enabled for
speed dial programming by the installer.
10
GCA70–251 Troubleshooting Your Telephone
Single...

This page remains blank intentionally. 

Index
A
AdjustingTheTelephonePedestal .......................... 1–4
AnsweringCalls......................................... 2–1
Answering Subdued Off-Hook
Voice Announcement (SOHVA) Calls...................... 2–2
AutomaticCallback,FromABusyStation.................... 3–4
AutomaticCallback,FromAnIdleStation.................... 3–5
B
BusyStation,WaitingForAnAnswerFromA(CallWaiting)..... 3–6
BusyStation,WaitingForAnAutomaticCallbackFromA....... 3–4
C
Calls,Answering...

L
Lights,UnderstandingWhatTheyMean...................... 1–2
M
Making A Paging Announcement........................... 7–1
Message-WaitingLight,Lighting ........................... 8–1
O
OutsideCalls,Transferring ................................ 5–1
P
Paging Announcement, Making A........................... 7–1
PagingSystem,UsingTheTracker.......................... 7–3
Pedestal, Adjusting The Telephone.......................... 1–4
Personal Ringing Tones, Setting............................ 7–5...

T
TrackerPagingSystem ................................... 7–3
TransferringOutsideCalls................................. 5–1
Troubleshooting Your Telephone........................... 10–1
V
Volume,SettingRing..................................... 7–5
GCA70–251 Index
Index – 3 

This page remains blank intentionally. 

Appendix A
Quick Reference Guide
This chart provides you with a quick reference guide of the feature
dialing codes. If you wish, you can detach this sheet and keep it near
your telephone to serve as a stand alone reference. Chapter 9 describes
methods to program these codes on your telephone at unused
programmable buttons. Further, the installer may store features at your
telephone buttons and label the buttons with the feature’s mnemonics.
Feature Enable Code Disable Code
Account Code INTERCOMS04 +...

Feature Enable Code Disable Code
Call Forward,
Ring-No Answer, All
CallsINTERCOMS54 INTERCOM # 5
Call Forward,
Ring-No Answer,
Personal CallsINTERCOMS53 INTERCOM # 5
Call Park, Orbit
91–99INTERCOMS
(91–99)
Call Park, Pick Up INTERCOM # 91–99
Call Pick Up,
DirectedINTERCOMS4+
extension no.
Call Pick Up, Group INTERCOM # 4
Clear Major Alarm
RingINTERCOM # 09
DISA Access Installer Assigned
Do Not Disturb INTERCOM # 01
Do Not Disturb,
Overrideextension no. +S03
DSS Programming INTERCOMSS3
Executive Override...