Cisco 881w Manual

							 
1-121
Cisco Integrated Services Router Hardware Installation Guide
 
Chapter 1      Product Overview
  Cisco 860, 880, 890 Series
Figure 1-71 shows the front panel of the Cisco 897VAM router.
Figure 1-71 Front Panel of the Cisco 897VAM Router
Figure 1-72 shows the back panel of the Cisco 897VAW router.
Figure 1-72 Back Panel of the Cisco 897VAW Router
48-port Gigabit Ethernet switch110Kensington security slot
5Console / Auxiliary port11VDSL / ADSL over POTS
6Power connector
1. Ports 0 through 3 can be configured as POE, which is an optional feature for this model. If this feature was not configured 
with the factory order, you must order and install it to enable the PoE function.
1
344768
1LEDs
     7                        6     GELAN    5                       4
    3                        2          POE      1                       0
8 GE WAN
54VDC       1.2A
12VDC       2.5A
VDSL/ADSL
overPOTS
CONSOLE
RESET
344771
11
12347891056
1GE WAN interface7On/Off switch
2SFP port8Reset button
3USB port9Earth ground connection
48-port Gigabit Ethernet switch
110Kensington security slot
5Console / Auxiliary port11VDSL / ADSL over POTS
6Power connector
1. Port 0 through 3 can be configured as POE. POE is an optional feature for this model. If this feature was not configured with 
the factory order, you must order and install it to enable the PoE function. 
						

							 
1-122
Cisco Integrated Services Router Hardware Installation Guide
 
Chapter 1      Product Overview
  Cisco 860, 880, 890 Series
Figure 1-73 shows the front panel of the Cisco 897VAW and the Cisco 897VAMW routers.
Figure 1-73 Front Panel of the Cisco 897VAW and the Cisco 897VAMW Routers
Figure 1-74 shows the back panel of the Cisco 897VAMW Router.
Figure 1-74 Back Panel of the Cisco 897VAMW Router
1
344770
1LEDs
     7                        6     GELAN    5                       4
    3                        2          POE      1                       0
8 GE WAN
54VDC       1.2A
12VDC       2.5A
VDSL/ADSL
overPOTS
CONSOLE
RESET
344772
11
12347891056
1GE WAN interface7On/Off switch
2SFP port8Reset button
3USB port9Earth ground connection
48-port Gigabit Ethernet switch
110Kensington security slot
5Console/Auxiliary port11VDSL / ADSL over POTS
6Power connector
1. Port 0 through 3 can be configured as POE. POE is an optional feature for this model. If this feature was not configured with 
the factory order, you must order and install it to enable the PoE function. 
						

							 
1-123
Cisco Integrated Services Router Hardware Installation Guide
 
Chapter 1      Product Overview
  Cisco 860, 880, 890 Series
Figure 1-75 shows the back panel of the Cisco 898EA router.
Figure 1-75 Back Panel of the Cisco 898EA Router
CautionThe primary WAN port is designed for an RJ-45 connector only. Damage to the primary WAN 
port may occur if a non-RJ-45 connector is inserted.
Figure 1-76 shows the front panel of the Cisco 898EA Router.
Figure 1-76 Front Panel of the Cisco 898EA Router
     7                        6     GELAN    5                       4
    3                        2          POE      1                       0
8 GE WAN
SFP
854VDC       1.2A
12VDC       2.5A
SHDSL
RJ45 ONLYCONSOLE
RESET
Cisco 898EA
AUX344774
11
12347891056
1GE WAN interface7On/Off switch
2SFP port8Reset button
3USB port9Earth ground connection
48-port Gigabit Ethernet switch
1
1. Ports 0 through 3 can be configured as POE, which is an optional feature for this model. If this feature is not configured with 
the factory order, you must order and install it to enable the PoE function.
10Kensington security slot
5Console/Auxiliary port11SHDSL (RJ45 only)
6Power connector
1
344773
1LEDs 
						

							 
1-124
Cisco Integrated Services Router Hardware Installation Guide
 
Chapter 1      Product Overview
  Cisco 860, 880, 890 Series
Cisco C897VAB-K9
The Cisco 897VAB-K9 ISR is designed to support 2-pair VDSL2 bonding up to the 17a profile and single 
pair support for ADSL/VDSL over POTS up to the 30a profile.
Ta b l e 1 - 4 1 provides information about important hardware specifications pertaining to Cisco
C897VAB-K9 ISR.
Figure 1-77 shows the back panel of the Cisco 897VAB-K9 ISR.
Figure 1-77 Back panel of the Cisco 897VAB-K9 ISR Table 1-41 Hardware Specifications of Cisco C897VAB-K9 ISR
Hardware Description
Flash Memory  256 MB
Main Memory  1-GB DDR RAM; fixed and not extendable
USB port  A USB 2.0-compliant port located on the back 
panel
FAN Fanless chassis
PoE (Optional) Four internal PoE ports
Primary WAN VDSL/ADSL over POTS
Backup WAN 10/100/1000 GE port (RJ-45/SFP)
Console or auxiliary port RJ-45
LAN switch 8-port 10/100/1000 GE Switch
ISDN
over POTS,VDSL 364228
123456710121189
B
1Primary WAN        VDSL / ADSL over POTS, 
VDSL2 Bonding17Console/Auxiliary Port
2SFP port8Power Connector
3GE WAN Interface9On/Off Switch
4ISDN10Reset Button
5USB Port11Earth Ground connection
68-port Gigabit Ethernet Switch
212Kensington Security slot 
						

							 
1-125
Cisco Integrated Services Router Hardware Installation Guide
 
Chapter 1      Product Overview
  Cisco 860, 880, 890 Series
CautionThe primary WAN port is designed for an RJ-11 or RJ-14 connector only. Damage to the 
primary WAN port may occur if a non-RJ-11 or RJ-14 connector is inserted.
Figure 1-78 shows the front panel of the Cisco 897VAB-K9 ISR.
Figure 1-78 Front panel of the Cisco 897 VAB-K9 ISR
Ta b l e 1 - 4 2  describes the LEDs for the Cisco 897VAB-K9 ISR.
1. 1.ADSL and VDSL (up to 17a) single-pair functionality uses the center pair of pins in the RJ-11 connector. VDSL 30a single 
pair functionality makes use of the pins just adjacent to the center pins. VDSL Bonding makes use of both the center pair pins 
& those just adjacent to the center pair to provide the 2 bonded VDSL lines. For more information, see Cisco 890 Series 
Integrated Services Routers Data Sheet.
2. 2.Ports 0 through 3 can be configured as POE, which is an optional feature for this model. If this feature is not configured 
with the factory order, you must order and install it to enable the PoE function.
364227
CD0 CD1 B1 B2ISDN
13
24
5
6
7
8
9
Table 1-42 LED Descriptions for the Cisco 897VAB-K9 ISR
Number LED Color Description
1 Power OK Green On—DC power is being supplied to the router and the 
Cisco IOS software is running.
Blinking—Boot up is in process, or the router is in ROM 
Monitor (ROMMON) mode.
Off—Power is not supplied to the router.
2 PoE OK Green/Yellow Off—Both POE card & POE power supply are not 
present.
Yellow On—Either POE card or POE power supply is 
not present.
Green On—Both POE card & POE power supply are 
present. 
						

							 
1-126
Cisco Integrated Services Router Hardware Installation Guide
 
Chapter 1      Product Overview
  Cisco 860, 880, 890 Series
3 GE LAN 0
GE LAN 1
GE LAN 2
GE LAN 3Green/Yellow Off—No link.
Green On—Link.
Yellow On—Fault with PoE. Implies no link.
Green Blinking—Data is either being received or 
transmitted.
4 GE LAN 4
GE LAN 5
GE LAN 6
GE LAN 7Green Off—No link.
On—Link.
Blinking—Data is either being received or being 
transmitted.
5 GE WAN 8 Green Off—No link.
On—Link.
Blinking—Data is either being received or being 
transmitted.
SFP WAN 8 Green Off—No link.
On—Link.
Blinking—Data is either being received or being 
transmitted.
6 VPN Green Off—No tunnel.
On—At least one tunnel is up.
7 PPP Green Off—No PPP session.
On—At least one PPP session established.
8 xDSL CD0 Green Off—Interface is shutdown.
On—Showtime, Link up.
Slow Blinking—Modem initialization.
Fast Blinking—Training up the line.
If both CD0 & CD1 are ON then VDSL Bonding is 
active. xDSL CD1
xDSL DATA Green Off—No Data.
Blinking—Data is either being received or transmitted.
9 ISDN B1 Green Blinking—Data is either being received or transmitted.
Off—No Data. ISDN B2
Table 1-42 LED Descriptions for the Cisco 897VAB-K9 ISR (continued)
Number LED Color Description 
						

							 
1-127
Cisco Integrated Services Router Hardware Installation Guide
 
Chapter 1      Product Overview
  Cisco 860, 880, 890 Series
Cisco C891 Series ISRs
Cisco C891 Series ISRs are designed to deliver secure broadband, metro Ethernet, wireless LAN 
(WLAN) connectivity, and business continuity. Cisco C891 Series ISRs also provide a 1-port Gigabit 
Ethernet SFP socket for WAN connectivity.
This section includes the hardware information for the following models:
Cisco C891F
Cisco C891FW
Ta b l e 1 - 4 3 provides information about the hardware specifications of the Cisco C891 Series Routers.
For detailed hardware specifications, see the Cisco C890 Series hardware data sheet at:
http://www.cisco.com/en/US/prod/collateral/routers/ps380/data_sheet_c78-519930.html
Cisco C891F Router 
Figure 1-79 shows the front panel of the Cisco C891F Router.
Table 1-43 Hardware Specifications of Cisco C891 Series ISR
Hardware Description
Flash Memory  256 MB
Main Memory  1-GB DDR RAM; fixed and not extendable
USB port  A USB 2.0-compliant port located on the back 
panel
FAN Fanless chassis
PoE 4 PoE ports
WAN 1-port GE or 1-port SFP
Data Backup
 1-port FE
 1-port ISDN
 1-port V.92
Console or auxiliary port RJ-45
LAN switch  8-port Gigabit Ethernet
Embedded Wireless AP  Dual 802.11b/g/n and 802.11a/n radios for 
C891FW 
						

							 
1-128
Cisco Integrated Services Router Hardware Installation Guide
 
Chapter 1      Product Overview
  Cisco 860, 880, 890 Series
Figure 1-79 Front Panel of the Cisco C891F Router
For detailed description about the LEDs on the Cisco C890 Series Routers, see the “LEDs” section on 
page 1-30.
361136
CiscoCisco800Series
OKOKPOEOE
PPPPPP
GE GE LAN
VPN
V.92V.92ISDNISDN
OKOK0
12345
6
7GE8GE8SFP8SFP8FE0FE0WANWAN
B1B1B2B2
POEOE
1
1LEDs 
						

							 
1-129
Cisco Integrated Services Router Hardware Installation Guide
 
Chapter 1      Product Overview
  Cisco 860, 880, 890 Series
Figure 1-80 shows the back panel of the Cisco C891F Router.
Figure 1-80 Back Panel of the Cisco C891F Router
For information on installing the Cisco C890 Series Routers, see:
http://www.cisco.com/en/US/docs/routers/access/800/860-880-890/hardware/installation/guide/2Instal
l880-860.html
Cisco C891FW Router
Figure 1-81 shows the front panel of the Cisco C891FW Router.
Figure 1-81 Front Panel of the Cisco C891FW Router
For detailed description about the LEDs on Cisco C890 Series Router, see “LEDs” section on page 1-30.
361137
FE FE WANANISDNISDNGE GE WANANSFPSFPV.92.92
76GE GE LANAN
CONONSOLEOLE
CiCisco 89 891F
RESRESET
AUXUX
54
32
POEPOE1
0
00
88 054V54VDC1.5A.5A3.5-5A3.5-5A12V12VDC
(POE)(POE)
12345781312911
10
6
1Back up WAN port—FE WAN8Console/Auxiliary port 
2ISDN9Power connector
3Primary WAN port—GE WAN10On/Off switch
4SFP11Reset button 
5USB port12 Earth ground connection
6V.92 backup13Kensington security slot
7 8-port 10/100/1000 Ethernet switch
361138
OK
POE
PPPGE LAN
VPNV.92ISDN OK 0
12345
6
7
GE8
SFP8FE0
5GHz
2.4GHz
WAN
B1B2 POE
Cisco800Series
1
1LEDs 
						

							 
1-130
Cisco Integrated Services Router Hardware Installation Guide
 
Chapter 1      Product Overview
  Cisco 860, 880, 890 Series
Figure 1-82 shows the back panel of the Cisco C891FW Router.
Figure 1-82 Back Panel of the Cisco C891FW Router
For information on installing the Cisco C890 Series Routers, see:
http://www.cisco.com/en/US/docs/routers/access/800/860-880-890/hardware/installation/guide/2Instal
l880-860.html
361139
FE FE WANANISDNISDNGE GE WANANSFPSFPV.92.92
76GE GE LANAN
CONONSOLEOLE
CiCisco 89 891FWFW
RESRESET
AUXUX
54
32
POEPOE1
0
00
88 054V54VDC1.5A.5A3.5-5A3.5-5A12V12VDC
(POE)(POE)
12345781312911
10
6
1Back up WAN port—FE8 Serial port—Console or auxiliary
2ISDN9Power connector 
3Primary WAN port—GE10On/Off switch
4SFP port11Reset button
5USB port12Earth ground connection
6V.92 backup port 13Kensington security slot
78-port 10/100/1000 Ethernet switch