Cisco 881w Manual

							 
1-91
Cisco Integrated Services Router Hardware Installation Guide
 
Chapter 1      Product Overview
  Cisco 860, 880, 890 Series
11 WWAN Green Module is powered on and connected but not 
transmitting or receiving.
Green (slow 
blinking)Module is powered on and searching for connection.
Green (fast 
blinking)Module is transmitting or receiving.
Off Module is not powered.
Table 1-34 LED Descriptions for the Cisco C881G-4G ISR
Number LED Color Description 
						

							 
1-92
Cisco Integrated Services Router Hardware Installation Guide
 
Chapter 1      Product Overview
  Cisco 860, 880, 890 Series
Figure 1-49 shows the back panel of the Cisco C881G-4G ISR.
Figure 1-49 Back Panel of the Cisco C881G-4G ISR
For information on installing the Cisco C880 Series Routers, see:
http://www.cisco.com/c/en/us/td/docs/routers/access/800/hardware/installation/guide/800HIG.html
Cisco C886VAG-LTE 
Figure 1-50 shows the front panel of the Cisco C886VAG-LTE ISR.
Figure 1-50 Front Panel of the Cisco C886VAG-LTE ISR
372522
12345681097
11121314
1Primary WAN port—FE9Earth ground connection
2USB port10 Kensington security slot
34G port114G Antenna connector—M1/DIV
4SIM slots 12 Power switch
54-port 10/100 Ethernet switch13Active GPS antenna connector
6Serial port—Console or auxiliary14 4G Antenna connector—M0/MAIN
7Reset button
8Power connector
372529
67891011
13
24
5 
						

							 
1-93
Cisco Integrated Services Router Hardware Installation Guide
 
Chapter 1      Product Overview
  Cisco 860, 880, 890 Series
Ta b l e 1 - 3 5  describes the LEDs for Cisco C886VAG-LTE ISR.
Table 1-35 LED Descriptions  for the Cisco C886VAG-LTE ISR
Number LED Color Description
1 Power OK Green On—DC power is being supplied to the router and the 
Cisco IOS software is running. 
Blinking—Boot up is in process, or the router is in 
ROMMON mode. 
Off—Power is not supplied to the router. 
2 PPP Green On—At least one PPP session is established. 
3 PoE Green On—PoE is connected and powered. 
Off—PoE is not installed. 
Amber On—Fault with the PoE. 
4 xDSL CD Green On—The xDSL interface is connected to the DSLAM. 
Blinking—Training the line. 
Off—Indicates that a connection has not been established 
or the port is shut down. 
xDSL Data Green Blinking—The xDSL interface is either receiving or 
transmitting data. 
Off—No data is being transmitted or received. 
5 SIM  Green / Yellow 
(one green blink 
followed by two 
yellow blinks)SIM in slot 0 is active, SIM in slot 1 is not. 
Ye l l o w  /  G r e e n  
(one yellow 
blink followed 
by two green 
blinks)SIM in slot 1 is active, SIM in slot 0 is not. 
Off / Green (two 
green blinks and 
then a pause)No SIM in slot 0, SIM present in slot 1. 
Green / Off 
(slow blink once 
and then a 
pause)SIM present in slot0, no SIM in slot 1. 
Off / Off No SIM present in either slots. 
6 VPN Green On—VPN is connected. 
7 FE LAN 
Port Links 
StatusGreen On—Ethernet port is connected. 
Blinking—Data is either being received or transmitted. 
Off—Ethernet port is not connected.  
						

							 
1-94
Cisco Integrated Services Router Hardware Installation Guide
 
Chapter 1      Product Overview
  Cisco 860, 880, 890 Series
8 GPS Green (solid) Standalone GPS. 
Green (slow 
blinking)GPS is acquiring signals. 
Yellow (solid Assisted GPS. 
Ye l l o w  ( s l o w  
blinking)Assisted GPS is acquiring signals. 
Off GPS is not configured. 
9 RSSI Green (solid) Signal strength bars are indicated by the corresponding 
LEDs.
10 Service Green  (Solid) Service is active and the corresponding LED is lit based on 
the service level that is active (2G, 3G, 3.7G, LTE). 
Off No service. 
11 WWAN Green Module is powered on and connected but not transmitting 
or receiving. 
Green (slow 
blinking)Module is powered on and searching for connection. 
Green (fast 
blinking)Module is transmitting or receiving. 
Off Module is not powered. 
Table 1-35 LED Descriptions  (continued)for the Cisco C886VAG-LTE ISR
Number LED Color Description 
						

							 
1-95
Cisco Integrated Services Router Hardware Installation Guide
 
Chapter 1      Product Overview
  Cisco 860, 880, 890 Series
Figure 1-51 shows the back panel of the Cisco C886VAG-LTE ISR.
Figure 1-51 Back Panel of the Cisco C886VAG-LTE ISR
Cisco C887VAG-4G Integrated Services Router
Figure 1-52 shows the front panel of the Cisco C887VAG-4G ISR.
Figure 1-52 Front Panel of the Cisco C887VAG-4G ISR
365672
123457986
1011121413
Cisco 886VAG-LTE
1USB port 8Earth ground connection 
2LTE port 9Kensington security slot
3SIM slots 10LTE antenna connector—M1/DIV 
44-port 10/100 Ethernet switch11Power switch 
5Serial port—Console or auxiliary12Active GPS antenna connector 
6Reset button13Primary WAN port—VDSL or ADSL over 
ISDN 
7Power connector14LTE antenna connector—M0/MAIN 
372529
67891011
13
24
5 
						

							 
1-96
Cisco Integrated Services Router Hardware Installation Guide
 
Chapter 1      Product Overview
  Cisco 860, 880, 890 Series
Ta b l e 1 - 3 6  describes the LEDs for Cisco C887VAG-4G ISR.
Table 1-36 LED Descriptions  for the Cisco C887VAG-4G ISR
Number LED Color Description
1 Power OK Green On—DC power is being supplied to the router and the 
Cisco IOS software is running.
Blinking—Boot up is in process, or the router is in 
ROMMON mode.
Off—Power is not supplied to the router.
2 PPP Green On—At least one PPP session is established.
3 PoE Green On—PoE is connected and powered.
Off—PoE is not installed.
Amber On—Fault with the PoE.
4 xDSL CD Green On—The xDSL interface is connected to the DSLAM.
Blinking—Training the line.
Off—Indicates that a connection has not been established 
or the port is shut down.
xDSL Data Green Blinking—The xDSL interface is either receiving or 
transmitting data.
Off—No data is being transmitted or received.
5 SIM  Green / Yellow 
(one green blink 
followed by two 
yellow blinks)SIM in slot 0 is active, SIM in slot 1 is not.
Ye l l o w  /  G r e e n  
(one yellow 
blink followed 
by two green 
blinks)SIM in slot 1 is active, SIM in slot 0 is not.
Off / Green (two 
green blinks and 
then a pause)No SIM in slot 0, SIM present in slot 1.
Green / Off 
(slow blink once 
and then a 
pause)SIM present in slot0, no SIM in slot 1.
Off / Off No SIM present in either slots.
6 VPN Green On—VPN is connected.
7 FE LAN 
Port Links 
StatusGreen On—Ethernet port is connected.
Blinking—Data is either being received or transmitted.
Off—Ethernet port is not connected. 
						

							 
1-97
Cisco Integrated Services Router Hardware Installation Guide
 
Chapter 1      Product Overview
  Cisco 860, 880, 890 Series
8 GPS Green (solid) Standalone GPS.
Green (slow 
blinking)GPS is acquiring signals.
Yellow (solid Assisted GPS.
Ye l l o w  ( s l o w  
blinking)Assisted GPS is acquiring signals.
Off GPS is not configured.
9 RSSI Green (solid) Signal strength bars are indicated by the corresponding 
LEDs.
10 Service Green  (Solid) Service is active and the corresponding LED is lit based on 
the service level that is active (2G, 3G, 3.7G, LTE).
Off No service.
11 WWAN Green Module is powered on and connected but not transmitting 
or receiving.
Green (slow 
blinking)Module is powered on and searching for connection.
Green (fast 
blinking)Module is transmitting or receiving.
Off Module is not powered.
Table 1-36 LED Descriptions  (continued)for the Cisco C887VAG-4G ISR
Number LED Color Description 
						

							 
1-98
Cisco Integrated Services Router Hardware Installation Guide
 
Chapter 1      Product Overview
  Cisco 860, 880, 890 Series
Figure 1-53 shows the back panel of the Cisco C887VAG-4G ISR.
Figure 1-53 Back Panel of the Cisco C887VAG-4G ISR
Cisco C896VAG-LTE Integrated Services Router
Figure 1-54 shows the front panel of the Cisco C896VAG-LTE ISR.
Figure 1-54 Front Panel of the Cisco C896VAG-LTE ISR
372523
123457986
1011121413
1USB port8Earth ground connection 
24G port9Kensington security slot
3SIM slots 10 4G antenna connector—M1/DIV 
44-port 10/100 Ethernet switch11Power switch
5Serial port—Console or auxiliary12Active GPS antenna connector
6Reset button13Primary WAN port—VDSL or ADSL over 
POTS
7Power connector144G antenna connector—M0/MAIN
372530
6
7
8
9
10
11
12
13
13
24
5 
						

							 
1-99
Cisco Integrated Services Router Hardware Installation Guide
 
Chapter 1      Product Overview
  Cisco 860, 880, 890 Series
Ta b l e 1 - 3 7  describes the LEDs for Cisco C896VAG-LTE ISR.
Table 1-37 LED Descriptions for Cisco C896VAG-LTE ISR
Number LED Color Description
1 Power OK Green On—DC power is being supplied to the router and the 
Cisco IOS software is running.
Blinking—Boot up is in process, or the router is in 
ROMMON mode
Off—Power is not supplied to the router.
2 PoE Green On—PoE is connected and powered.
Off—PoE is not installed.
Amber On—Fault with the PoE.
3 GE LAN PoE 
Ports Green/Ambe
rGreen On—Ethernet port is connected.
Amber On—Fault with PoE. There is a fault with the 
in-line power supply.
Green/Amber Blinking—Data is either being received or 
being transmitted.
Green/Amber Off—Ethernet port is not connected.
4 GE LAN Ports Green On—Ethernet port is connected.
Blinking—Data is either being received or being 
transmitted.
Off—Ethernet port is not connected.
5 GE WAN Ports Green On—Port is connected.
Blinking—Data is either being received or transmitted.
Off—Port is not connected.
SFP WAN port Green On—Port is connected.
Blinking—Data is either being received or transmitted.
Off—No link
6 VPN Green On—VPN is connected.
7 PPP Green On—At least one PPP session is established.
8 xDSL CD Green On—The xDSL interface is connected to the DSLAM.
Blinking—Training the line.
Off—Indicates that a connection has not been 
established or the port is shut down.
xDSL Data Green Blinking—The xDSL interface is either receiving or 
transmitting data.
Off—No data is being transmitted or received. 
						

							 
1-100
Cisco Integrated Services Router Hardware Installation Guide
 
Chapter 1      Product Overview
  Cisco 860, 880, 890 Series
9 SIM Green / 
Yellow (one 
green blink 
followed by 
two yellow 
blinks)SIM in slot 0 is active, SIM in slot 1 is not.
Yellow / 
Green (one 
yellow blink 
followed by 
two green 
blinks)SIM in slot 1 is active, SIM in slot 0 is not.
Off / Green 
(two green 
blinks and 
then a pause)No SIM in slot 0, SIM is present in slot 1.
Green / Off 
(slow green 
blink once 
and then a 
pause)SIM is present in slot0, no SIM in slot 1.
Off / Off No SIM present in either slots.
10 Service Green 
(Solid)Service is active and the corresponding LED is lit based 
on the service level that is active (2G, 3G, 3.5G, 3.7G, 
LTE).
Off No service.
11 RSSI Green 
(solid)Signal strength bars are indicated by the corresponding 
LEDs.
12 GPS Green 
(solid)Standalone GPS.
Green (slow 
blinking)GPS is acquiring signals.
Yellow 
(solid)Assisted GPS.
Yellow 
(slow 
blinking)Assisted GPS is acquiring signals.
Off GPS is not configured.
Table 1-37 LED Descriptions  (continued)for Cisco C896VAG-LTE ISR
Number LED Color Description