Home > Cisco > Ethernet Switch > Cisco 6500e Manual

Cisco 6500e Manual

Here you can view all the pages of manual Cisco 6500e Manual. The Cisco manuals for Ethernet Switch are available online for free. You can easily download all the documents as PDF.

Page 161

1-39
Catalyst 6500 Series Switches Installation Guide
OL-5781-08
Chapter 1      Installing the Switch
  Installing a Catalyst 6509-V-E Switch Chassis
Figure 1-20 Installing a Catalyst 6509-V-E Switch Chassis in a Rack
112-24 or 10-32 rack-mounting screws (10x)2Shelf bracket
INPUT
OKFA N
OKOUTPUT
FA IL
o
280388
POWER SUPPLY 1
POWER SUPPLY 2
W
S
-S
U
P32
-G
E
-3
BSTA
TUS
SYSTEM
ACTIVE
PWR
 MG
MT
RES
ETC
A
TA
L
Y
S
T
   6
500
 S
UP
E
R
V
ISO
R
  
E
N
G
IN
E
  32
C
O
N
S
O
L
E
E
J
E
C
TD
IS
K
 0P
O
R
T 1
P...

Page 162

1-40
Catalyst 6500 Series Switches Installation Guide
OL-5781-08
Chapter 1      Installing the Switch
  Installing a Catalyst 6509-V-E Switch Chassis
Installing the Cable Management System (Optional)
The accessory kit for the Catalyst 6509-V-E switch chassis includes an optional cable management 
system that is installed on the front of the switch chassis. This cable management system is only 
available for the Catalyst 6509-V-E switch chassis. 
NoteThe cable management system adds an additional 6.8...

Page 163

1-41
Catalyst 6500 Series Switches Installation Guide
OL-5781-08
Chapter 1      Installing the Switch
  Installing a Catalyst 6509-V-E Switch Chassis
Step 5Pivot the cable management assembly up on its hinges so that the back plate of the assembly is flush 
against the chassis. Secure the cable management assembly in place to the front of the chassis with the 
two captive installation screws. (See Figure 1-22.)
Figure 1-22 Securing the Cable Management Assembly to the Front of the Chassis
1Cable guide...

Page 164

1-42
Catalyst 6500 Series Switches Installation Guide
OL-5781-08
Chapter 1      Installing the Switch
  Installing a Catalyst 6513 or Catalyst 6513-E Switch Chassis
What is Next
After installing the chassis in its location, complete the installation process by following these 
procedures:
Connecting the chassis to system ground. See “Establishing the System Ground” section on 
page 1-52.
Installing and connecting the power supplies to source power. Go to Chapter 4 for information on 
how to install and...

Page 165

1-43
Catalyst 6500 Series Switches Installation Guide
OL-5781-08
Chapter 1      Installing the Switch
  Installing a Catalyst 6513 or Catalyst 6513-E Switch Chassis
The accessory kit also contains the following chassis installation kits:
A rack-mount shelf kit. The rack-mount shelf kit is used to support the weight of the chassis while 
you secure the chassis L brackets to the rack enclosure.
A stabilizer bracket kit. If you are not installing the Catalyst 6513 or Catalyst 6513-E switch in a 
rack, you...

Page 166

1-44
Catalyst 6500 Series Switches Installation Guide
OL-5781-08
Chapter 1      Installing the Switch
  Installing a Catalyst 6513 or Catalyst 6513-E Switch Chassis
Figure 1-23 L Brackets on the Catalyst 6513 Switch Chassis
Installing the 3 RU Rack-Mount Shelf Kit
The 3 RU rack-mount shelf kit is included as part of the accessory kit for the Catalyst 6513 and the 
Catalyst 6513-E switch chassis. You need to install this kit first before you install the chassis in the rack. 
The shelf kit supports the...

Page 167

1-45
Catalyst 6500 Series Switches Installation Guide
OL-5781-08
Chapter 1      Installing the Switch
  Installing a Catalyst 6513 or Catalyst 6513-E Switch Chassis
Rack-Mounting the Chassis
TipWe recommend that you have a third person to assist in this procedure.
CautionFor easier installation, the chassis should be empty when you install it in the rack.
WarningTwo people are required to lift the chassis. To prevent injury, keep your back straight and lift with your 
legs, not your back. Statement 164...

Page 168

1-46
Catalyst 6500 Series Switches Installation Guide
OL-5781-08
Chapter 1      Installing the Switch
  Installing a Catalyst 6513 or Catalyst 6513-E Switch Chassis
Figure 1-24 Installing the Catalyst6513 Switch Chassis in the Rack
What is Next
After installing the chassis in its location, complete the installation process by following these 
procedures:
Connecting the chassis to system ground. See “Establishing the System Ground” section on 
page 1-52.
Installing and connecting the power supplies to...

Page 169

1-47
Catalyst 6500 Series Switches Installation Guide
OL-5781-08
Chapter 1      Installing the Switch
  Generic Installation Procedures
Optional Installation Kits
An optional stabilizer bracket installation kit is included in the accessory kit for the Catalyst 6513 and 
the Catalyst 6513-E switch chassis. This kit contains the parts necessary to install two brackets on the 
bottom of the chassis to provide additional stability for the chassis when the chassis is not rack mounted 
allowing the chassis to...

Page 170

1-48
Catalyst 6500 Series Switches Installation Guide
OL-5781-08
Chapter 1      Installing the Switch
  Generic Installation Procedures
NoteThis rack-mounting kit is not suitable for use with racks that have obstructions (such as power strips) 
because the obstructions could impair access to switch field-replaceable units (FRUs).
Required Tools
These tools and equipment are required to install the rack-mount shelf kit:
Number 1 and number 2 Phillips screwdrivers
3/16-inch flat-blade screwdriver 
Tape...
Start reading Cisco 6500e Manual

Related Manuals for Cisco 6500e Manual

All Cisco manuals