Christie Projector Roadie HD+35K User Manual

							Roadie HD+35K
USER MANUAL
020-100340-02 
						

							Roadie HD+35K
USER MANUAL
020-100340-02 
						

							NOTICES 
COPYRIGHT AND TRADEMARKS 
© 2010 Christie Digital Systems USA, Inc.  All rights reserved.
All brand names and product names are trademarks, registered trademarks or trade names of their respective holders.
REGULATORY
The product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.  These limits are 
designed to provide reasonable protection against harmful interference when the product is operated in a commercial environment.  The product 
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful 
interference to radio communications.  Operation of the product in a residential area is likely to cause harmful interference in which case the user will 
be required to correct the interference at the user’s own expense.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
이 기기는 업무용(A급)으로 전자파적합등록을 한 기기이오니 판매자 또는 사용자는 이점을 주의하시기 바라며, 가정 외의 지역에서 사용하는 것을 목적
으로 합니다.
GENERAL
Every effort has been made to ensure accuracy, however in some cases changes in the products or availability could occur which may not be reflected 
in this document.  Christie reserves the right to make changes to specifications at any time without notice.  Performance specifications are typical, but 
may vary depending on conditions beyond Christie's control such as maintenance of the product in proper working conditions.  Performance 
specifications are based on information available at the time of printing.  Christie makes no warranty of any kind with regard to this material, including, 
but not limited to, implied warranties of fitness for a particular purpose. Christie will not be liable for errors contained herein or for incidental or 
consequential damages in connection with the performance or use of this material.
The product is designed and manufactured with high-quality materials and components that can be recycled and reused.  This symbol  means 
that electrical and electronic equipment, at their end-of-life, should be disposed of separately from regular waste. Please dispose of the product 
appropriately and according to local regulations.  In the European Union, there are separate collection systems for used electrical and electronic 
products.  Please help us to conserve the environment we live in!
Canadian manufacturing facility is ISO 9001 and 14001 certified.
WARRANTY
For complete information about Christie’s limited warranty, please contact your Christie dealer.  In addition to the other limitations that may be 
specified in Christie’s limited warranty, the warranty does not cover:
(a) Damage occurring during shipment, in either direction.
(b) Projector lamps (See Christie’s separate lamp program policy).
(c) Damage caused by use of a projector lamp beyond the recommended lamp life, or use of a lamp supplied by a supplier other than 
Christie.
(d) Problems caused by combination of the product with non-Christie equipment, such as distribution systems, cameras, video tape 
recorders, etc., or use of the product with any non-Christie interface device.
(e) Damage caused by misuse, improper power source, accident, fire, flood, lightening, earthquake or other natural disaster.
(f) Damage caused by improper installation/alignment, or by product modification, if by other than a Christie authorized repair service 
provider.
(g) For LCD projectors, the warranty period specified applies only where the LCD projector is in “normal use.” “Normal use” means the LCD 
projector is not used more than 8 hours a day, 5 days a week. For any LCD projector where “normal use” is exceeded, warranty co
verage 
under this warranty terminates after 6000 hours of operation.
(h) Failure due to normal wear and tear.
PREVENTATIVE MAINTENANCE
Preventative maintenance is an important part of the continued and proper operation of your product. Please see the Maintenance section for specific 
maintenance items as they relate to your product.  Failure to perform maintenance as required, and in accordance with the maintenance schedule 
specified by Christie, will void the warranty. 
						

							       Table of Contents
Roadie HD+35K User Manuali020-100340-02 Rev. 1 (01-2010)
1: Introduction
1.1 Using this Manual........................................................................................................................ 1-1
1.1.1 Labels and Marking ............................................................................................................. 1-2
1.1.2 35K Typographical Notations..............................................................................................1-2
1.2 Purchase Record and Service Contacts .......................................................................................1-2
1.3 Projector Overview ...................................................................................................................... 1-3
1.3.1 How the Projector Works .................................................................................................... 1-3
1.3.2 List of Components.............................................................................................................. 1-4
1.3.3 Key Features ........................................................................................................................ 1-4
2: Installation and Setup
2.1 Projector Quick Setup and Installation ........................................................................................ 2-1
2.1.1 Quick Setup.......................................................................................................................... 2-1
2.2 Installation Considerations .......................................................................................................... 2-6
2.2.1 Screen Type ......................................................................................................................... 2-6
2.2.2 Screen Size........................................................................................................................... 2-7
2.2.3 Screen Aspect Ratio ............................................................................................................. 2-7
2.2.4 Ambient Lighting................................................................................................................. 2-11
2.2.5 Other Considerations ........................................................................................................... 2-11
2.3 Projector Position and Mounting ................................................................................................. 2-12
2.3.1 Throw Distance .................................................................................................................... 2-12
2.3.2 Vertical & Horizontal Position ............................................................................................2-13
2.3.3 Floor Mounting and Leveling..............................................................................................2-15
2.3.4 Tilting and Special Orientations ..........................................................................................2-16
2.3.5 Hoisting and Stacking .......................................................................................................... 2-17
2.4 Installing Lens, Lamp, and Cooling ............................................................................................ 2-20
2.4.1 Lens Installation................................................................................................................... 2-20
2.4.2 Install First Lamp ................................................................................................................. 2-22
2.5 Connecting Sources ..................................................................................................................... 2-23
2.5.1 RGB Signals ........................................................................................................................ 2-25
2.5.2 YPbPr Signals (Component Video)
. ............................................................................................ 2-26
2.5.3 Composite Video ................................................................................................................. 2-26
2.5.4 Dual SD/HD-SDI ................................................................................................................. 2-27
2.5.5 Extra Video .......................................................................................................................... 2-28
2.5.6 Optional Inputs .................................................................................................................... 2-28
2.6 Connecting Communications ...................................................................................................... 2-28
2.6.1 Standard IR Remotes ........................................................................................................... 2-29
2.6.2 Other Controllers ................................................................................................................. 2-30
2.7 Connecting Multiple Projectors ................................................................................................... 2-32
2.7.1 Serial Links .......................................................................................................................... 2-33
2.7.2 Ethernet Networks ............................................................................................................... 2-34
2.7.3 Separating or Joining Serial Networks ................................................................................ 2-36
2.7.4 Communicating to All Ports ................................................................................................2-38
2.7.5 Communicating to Certain Ports.......................................................................................... 2-39
2.7.6 Projector Numbers ............................................................................................................... 2-40 
						

							iiRoadie HD+35K User Manual020-100340-02 Rev. 1 (01-2010)
Table of Contents
2.8 Connecting the Ballast .................................................................................................................2-40
2.8.1 Configuring the Ballast for Incoming AC............................................................................2-40
2.8.2 Connect to Projector.............................................................................................................2-41
2.9 Initial Switch On ..........................................................................................................................2-41
2.9.1 Set Lamp Type .....................................................................................................................2-41
2.9.2 Turning ON the Projector ....................................................................................................2-42
2.9.3 Set Cable Length ..................................................................................................................2-42
2.10 Maximizing Light Output ..........................................................................................................2-42
2.11 Basic Image Adjustment ............................................................................................................2-42
2.12 Boresight Adjustment ................................................................................................................2-43
2.12.1  Adjust Offset .....................................................................................................................2-43
2.12.2  Adjust Left/Right Boresight ..............................................................................................2-44
2.12.3  Adjust Top/Bottom Boresight ...........................................................................................2-44
2.12.4  Add Anamorphic Lens ......................................................................................................2-45
2.13 Internal Optical Adjustments .....................................................................................................2-45
2.13.1  Contrast Ratio Adjustment ................................................................................................2-45
2.13.2  Color Gamut Adjustment ..................................................................................................2-46
2.13.3  Maximizing Brightness .....................................................................................................2-46
2.13.4  DMD Convergence ...........................................................................................................2-46
2.13.5  Fold Mirror Adjustment ....................................................................................................2-46
2.14 IR Remote Protocols and Adjustment .......................................................................................2-47
2.14.1  Standard IR Remote Protocols ..........................................................................................2-48
2.14.2 Converting a Remote .........................................................................................................2-49
3: Operation
3.1 Projector Basics ...........................................................................................................................3-1
3.1.1 Air Filter...............................................................................................................................3-1
3.1.2 Ballast Breaker/Power Switch (ON/OFF)............................................................................3-2
3.1.3 Control Panel (Rear of Projector) ........................................................................................3-2
3.1.4 Handles.................................................................................................................................3-3
3.1.5 Channels for FredFrame™...................................................................................................3-3
3.1.6 Lens Mount & Anamorphic Lens Mount.............................................................................3-3
3.1.7 Lens Mount and Projection Lenses ......................................................................................3-3
3.1.8 Input Panel ...........................................................................................................................3-3
3.1.9 Lamp ....................................................................................................................................3-4
3.1.10 Leveling Feet......................................................................................................................3-4
3.1.11 DC Power Cables ...............................................................................................................3-4
3.1.12 Projection Head ..................................................................................................................3-4
3.1.13 Rear Connection Panel .......................................................................................................3-4
3.1.14 Security Locks....................................................................................................................3-6
3.2 Using the Built-In Keypad or Remotes........................................................................................3-6
3.2.1 Built-in Keypad ....................................................................................................................3-6
3.2.2 Standard IR Remote and Transmission ................................................................................3-7
3.2.3 Wired IR Remote .................................................................................................................3-7
3.2.4 The Lite Remote (Optional) .................................................................................................3-8
3.2.5 Guide to Keypads .........................................................................................................
........3-9 
						

							       Table of Contents
Roadie HD+35K User Manualiii020-100340-02 Rev. 1 (01-2010)
3.2.6 Keypad and Standard IR Remote Functions ........................................................................ 3-9
3.3 Power-up Procedure/Checklist .................................................................................................... 3-15
3.4 Power-down Procedure................................................................................................................ 3-16
3.5 Navigating through the Menu System .........................................................................................3-16
3.5.1 On-line Help ........................................................................................................................ 3-17
3.5.2 Time-outs ............................................................................................................................. 3-18
3.5.3 The Global Icon  .................................................................................................................. 3-18
3.5.4 The PIP Icon  ....................................................................................................................... 3-18
3.5.5 Using Slidebars and Other Controls .................................................................................... 3-18
3.5.6 Editing Text ......................................................................................................................... 3-19
3.5.7 Editing Numerical Values.................................................................................................... 3-20
3.6 Adjusting the Image..................................................................................................................... 3-21
3.6.1 Before You Begin ................................................................................................................ 3-21
3.6.2 Size and Position Menu ....................................................................................................... 3-21
3.6.3 Image Settings Menu ........................................................................................................... 3-27
3.7 Using Inputs and Channels .......................................................................................................... 3-35
3.7.1 Do I Select an Input or a Channel? ...................................................................................... 3-35
3.7.2 Creating a New Channel ...................................................................................................... 3-37
3.7.3 Selecting a Channel ............................................................................................................. 3-37
3.7.4 Available Channels in the Channel Setup Menu ................................................................. 3-38
3.7.5 Copying a Channel............................................................................................................... 3-39
3.7.6 Deleting One or More Channels .......................................................................................... 3-40
3.7.7 Editing a Channel Setup ...................................................................................................... 3-41
3.8 Adjusting System Parameters and Advanced Controls ............................................................... 3-42
3.8.1 System Configuration (General Settings) ............................................................................ 3-42
3.8.2 System Configuration (Communication) ............................................................................. 3-44
3.8.3 System Configuration (Geometry & Color) ........................................................................ 3-48
3.8.4 System Configuration (Diagnostics / Calibration)............................................................... 3-51
3.8.5 System Configuration (Optional Input Modules) ................................................................ 3-54
3.9 Working with PIP ........................................................................................................................ 3-54
3.9.1 Controlling Your PIP Image ................................................................................................3-55
3.10 Working with the Lamp............................................................................................................. 3-57
3.10.1 Which Lamp is Installed? .................................................................................................. 3-57
3.10.2 Lamp Cable Lengths .......................................................................................................... 3-58
3.10.3 Turning the Lamp ON/OFF ............................................................................................... 3-59
3.10.4 If the Lamp Will Not Turn On ........................................................................................... 3-60
3.10.5 Lamp Menu ........................................................................................................................ 3-60
3.10.6 Adjusting Lamp Position (LampLOC™) .......................................................................... 3-63
3.10.7 Stand-by Mode................................................................................................................... 3-64
3.10.8 How Old is My Lamp?  .....................................................................................................3-65
3.10.9 When to Replace the Lamp................................................................................................3-65
3.11 Status Menu ............................................................................................................................... 3-65
3.12 Using Multiple Projectors.................................................................................................
......... 3-65
3.12.1 Matching Colors In Multiple Screens ................................................................................ 3-66
3.12.2 Achieving Brightness Uniformity...................................................................................... 3-69
3.12.3 Edge Blending.................................................................................................................... 3-72 
						

							ivRoadie HD+35K User Manual020-100340-02 Rev. 1 (01-2010)
Table of Contents
3.13 Remote Control of the Projector ................................................................................................3-76
3.14 Working with the Lenses ...........................................................................................................3-77
3.14.1 Anamorphic Lens ...............................................................................................................3-78
3.15 Error Conditions ........................................................................................................................3-78
3.15.1 System Warnings/Errors ....................................................................................................3-79
4: Maintenance
4.1 Safety Warnings and Guidelines..................................................................................................4-1
4.1.1 General Precautions .............................................................................................................4-1
4.1.2 AC / Power Precautions .......................................................................................................4-1
4.1.3 Lamp Precautions.................................................................................................................4-2
4.2 Maintaining Proper Cooling ........................................................................................................4-2
4.2.1 Ventilation ............................................................................................................................4-3
4.2.2 Air Filter...............................................................................................................................4-3
4.2.3 Liquid Cooler .......................................................................................................................4-3
4.3 Maintenance and Cleaning...........................................................................................................4-3
4.3.1 Electrical..............................................................................................................................4-3
4.3.2 Optical ..................................................................................................................................4-3
4.3.3 Other Components ...............................................................................................................4-5
4.4 Replacing the Lamp & Filter .......................................................................................................4-5
4.4.1 Lamp Replacement Procedure .............................................................................................4-5
4.4.2 Filter Replacement Procedure ..............................................................................................4-9
4.5 Replacing a Lens ..........................................................................................................................4-10
5: Troubleshooting
5.1 Power ...........................................................................................................................................5-1
5.1.1 Projector Does Not Power ON .............................................................................................5-1
5.2 Lamp ............................................................................................................................................5-1
5.2.1 Lamp Does Not Ignite ..........................................................................................................5-1
5.2.2 Lamp Suddenly Goes OFF...................................................................................................5-1
5.2.3 Flicker, Shadows Or Dimness ..............................................................................................5-2
5.2.4 LampLOC™ Does Not Seem to Work ................................................................................5-2
5.2.5 LiteLOC™ Does Not Seem to Work ...................................................................................5-2
5.3 Calibrating the Lens Mount .........................................................................................................5-3
5.4 Built In Keypad ............................................................................................................................5-3
5.4.1 Projector ON, but No Backlight on Built-In Keypad...........................................................5-3
5.5 Image Displays ............................................................................................................................5-3
5.5.1 Blank Screen, No Display of Image.....................................................................................5-3
5.5.2 Severe Motion Artifacts .......................................................................................................5-3
5.5.3 Image Appears Vertically Stretched or ‘Squeezed’ into Center of Screen ..........................5-4
5.5.4 The Projector is ON, but There is No Display .....................................................................5-4
5.5.5 The Display is Jittery or Unstable ........................................................................................5-4
5.5.6 The Display is Faint .............................................................................................................5-4
5.5.7 The Upper Portion of the Display is Waving, Tearing or Jittering ......................................5-4
5.5.8 Portions of the Display are Cut OFF or Warped to the Opposite edge ................................5-4 
						

							       Table of Contents
Roadie HD+35K User Manualv020-100340-02 Rev. 1 (01-2010)
5.5.9 Display Appears Compressed (Vertically Stretched) .......................................................... 5-5
5.5.10 Data is Cropped from Edges ..............................................................................................5-5
5.5.11 Display Quality Appears to Drift from Good to Bad, Bad to Good .................................. 5-5
5.5.12 Display has Suddenly Froze ..............................................................................................5-5
5.5.13  Colors in the Display are Inaccurate ................................................................................. 5-5
5.5.14  Display is Not Rectangular ............................................................................................... 5-5
5.5.15  Display is “Noisy” ............................................................................................................ 5-5
6: Specifications
6.1 Display ......................................................................................................................................... 6-1
6.1.1 Panel Resolution and Refresh Rate...................................................................................... 6-1
6.1.2 Achievable Brightness ......................................................................................................... 6-1
6.1.3 Achievable Contrast Ratio ................................................................................................... 6-1
6.1.4 Colors and Gray Scale ......................................................................................................... 6-1
6.1.5 Gamma ................................................................................................................................. 6-1
6.2 Lenses .......................................................................................................................................... 6-2
6.3 Inputs ........................................................................................................................................... 6-2
6.3.1 Analog: RGB / YPbPr (5 BNCs at INPUT 1) ..................................................................... 6-2
6.3.2 Analog: Video (INPUTS 3 and 4) ....................................................................................... 6-2
6.3.3 Analog: Sync (Interlaced or Progressive Scan Format)....................................................... 6-3
6.3.4 DVI-I (INPUT 2) ................................................................................................................. 6-3
6.3.5 Dual SD/HD-SDI (INPUT 5 or 6, Standard with Projector)  .............................................. 6-3
6.4 Control......................................................................................................................................... 6-4
6.4.1 Wired Remote (Converted from IR Remote)   .................................................................... 6-4
6.4.2 IR Remote ............................................................................................................................ 6-4
6.4.3 Ethernet ................................................................................................................................ 6-4
6.4.4 RS-232 Serial Input ............................................................................................................. 6-4
6.4.5 RS-422 Serial Input ............................................................................................................. 6-4
6.4.6  GPIO Input.......................................................................................................................... 6-5
6.4.7 Control Port (From Ballast) ................................................................................................. 6-5
6.4.8 Ballast Ports ......................................................................................................................... 6-5
6.5 Power ........................................................................................................................................... 6-5
6.5.1 Projection head .................................................................................................................... 6-5
6.5.2 7 kW 3-Phase Ballast (38-814001-51)................................................................................. 6-6
6.6 Lamps .......................................................................................................................................... 6-6
6.7 Reflectors ..................................................................................................................................... 6-7
6.8 Audible Noise .............................................................................................................................. 6-7
6.9 Safety ........................................................................................................................................... 6-7
6.10 EMC Emissions ......................................................................................................................... 6-7
6.11 EMC Immunity .......................................................................................................................... 6-7
6.12 Operating Environment ............................................................................................................. 6-7
6.12.1 Non-Operating Environment ............................................................................................. 6-7
6.12.2 Weight & Size.................................................................................................................... 6-8
6.13 Standard and Optional Components ..........................................................................................6-9
6.13.1 Standard (Sold with Product)............................................................................................
.6-9
6.13.2 Optional (Sold Separately)................................................................................................. 6-9 
						

							viRoadie HD+35K User Manual020-100340-02 Rev. 1 (01-2010)
Table of Contents
A:  Serial Communication Cables
A.1 Serial Links to Projector .............................................................................................................A-1
A.1.1 General Communications ....................................................................................................A-1
A.1.2 Software Downloads ...........................................................................................................A-1
A.1.3 RS-422 Connections............................................................................................................A-1
B:  Menu Tree
B.1 OnScreen Menu Tree ..................................................................................................................B-1
C:  System Integration
C.1 Introduction .................................................................................................................................C-1
C.1.1 Configuring the GPIO .........................................................................................................C-1
C.1.2 Query Command .................................................................................................................C-2
C.1.3 Real Time Event ..................................................................................................................C-2
D:  Optional Input Modules
D.1 DVI Input Module.......................................................................................................................D-1
D.2 Dual SD/HD-SDI Module...........................................................................................................D-1