Christie Projector Mirage WQ-L User Manual

   Web UI Overview
Mirage WQ-L User Manual31
020-101372-02 Rev. 1 (10-2014)
Basic WebUI Operation
Five primary tabs are located along the top of the WebUI. Each primary tab also has related 
secondary tabs, which are located along the bottom of each tab. 
Main Tab—General
Under the  Main tab, select the  General tab at the bottom of the window to view general 
information on inputs and projector status, and to activate a test pattern and color enable control.
Main Tab—Status
Under the  Main tab, select...

   Web UI Overview
Mirage WQ-L User Manual32
020-101372-02 Rev. 1 (10-2014)
Admin Tab
Under the  Admin tab, select the  System tab at the bottom of the window to upgrade, upload, 
backup and restore specific files, change gamma  properties, and interrogate the projector (creating 
a zip file of information).
1Maximize/Minimize toggle buttons.
2The Help button presents a  pop-up window, which provides information to help you 
navigate within  the current menu.
3The Virtual OSD tab presents the Main menu....

   Web UI Overview
Mirage WQ-L User Manual33
020-101372-02 Rev. 1 (10-2014)
Upload a Gamma File
1. Select  Gamma from the  Upload drop-down list. 
2. To locate and select the file you want to upload, click  Choose File.
3. Type a descriptive name in the  Display Name field.
4. From the  Index drop-down select which  memory location the file should be stored to.
5. Click  Upload. 
1The Upload feature allows you to select the file and file type you want to open.
2The Backup feature allows you to select th...

   Web UI Overview
Mirage WQ-L User Manual34
020-101372-02 Rev. 1 (10-2014)
Create a Backup File
1. From the  Backup drop-down list, select from the following  file types:  All, Preferences , 
Configuration , Users,  or Real Time Events . 
2. To initiate the download, click  Backup. Once finished, a  File Download window appears.
3. Click  Save.
4. Locate and select a folder where you want to save the file.
5. Click  Save. 
Restore a File
1. Select a file type ( All, Preferences , Configuration , Users...

   Web UI Overview
Mirage WQ-L User Manual35
020-101372-02 Rev. 1 (10-2014)
Add a Scheduled Event
Scheduled events include a command or sequence  of commands, for example, (PWR1) or (PWR1) 
(LSH1).
1. From the Advanced tab, click  Add to open the  RTE Wizard.
2. Select the  Scheduled Event  tab.
3. Select the frequency option for the event by selecting either  Once, Daily , Weekly , or 
Monthly . End Date is enabled when  Daily, Weekly  or Monthly  repeat options are selected. 
Depending on the selected...

   Web UI Overview
Mirage WQ-L User Manual36
020-101372-02 Rev. 1 (10-2014)
Add a GPIO Event
1. From the Advanced tab, click  Add to open the  RTE Wizard.
2. Select the  GPIO Event tab.
3. For the  GPIO Event  option define the  Input Condition field as required. 
The  Input Condition  field contains seven blocks, which refer to the seven I/O pins on the 
GPIO connector. Pin 1 = +12V and Pin 5 = Ground  are not included or changed. Clicking a block 
toggles between H, L and X. 
See  Serial Communication...

Mirage WQ-L User Manual37
020-101372-02 Rev. 1 (10-2014)
Operation
This section explains how to correctly setup and operate the projector.
Using the IR Remote    
The standard IR remote can be used as a wired  or wireless control. Under optimal conditions, the 
wireless keypad can communicate with a projector over a 30 foot (10 m) distance. In wireless 
mode, the standard IR remote communicates with  a battery-powered infrared (IR) transmitter. 
A laser pointer is built into the standard IR remote.
•...

   Operation
Mirage WQ-L User Manual38
020-101372-02 Rev. 1 (10-2014)
the down arrow key (Off) to guarantee the correct ac tion. This is useful if you are not sure of the 
current state of the projector. 
Shutter
The  Shutter  button powers the LEDS On and 
Off to simulate shutter operation. Press and 
hold the  Shutter button to move between 
simulated shutter states in the following 
order: Open–Closed–Open. Or, press and 
release the  Shutter button followed 
immediately by the up arrow (closed) or...

   Operation
Mirage WQ-L User Manual39
020-101372-02 Rev. 1 (10-2014)
Enter
Press  Enter to select a highlighted item, to toggle  a check box, or to accept a parameter 
adjustment and return to the previous menu or image.
Exit
Press  Exit to return to the previous menu.  
Laser
Press the  Laser button to activate the laser pointer on the remote.
Select Inputs
An input is an input source physically connected to the projector. Input describes the source signal 
to which it is connected. For a full...

   Operation
Mirage WQ-L User Manual40
020-101372-02 Rev. 1 (10-2014)
Take Control of the Array
Use this menu to set up array color and brightness.  By default ArrayLOC is configured to display the 
EBU gamut at the maximum brightness the array can support.      
1. On the projector you want to work with, access the ArrayLOC menu:  Main Menu > ArrayLOC.
2. Check  Synchronize to This Projector to make the current projector the master.
Changes you make in the  Array Color Target, Bright/ColorLO C...