Christie Projector Mirage S+/HD/WU User Manual

 Section 3: Operation 
Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual  3-41 020-100001-07 Rev. 1 (11-2009) 
SPLASH SCREEN SETUP —Use the Splash Screen to choose when you would like to 
display a special introductory splash screen image, such as your company logo, 
graphic or message. 
 Always Off = A splash screen never appears 
 Always On = A splash screen is always on behind the current display image, 
similar to wallpaper. 
 Start-up Only – The splash screen logo appears at...

Section 3: Operation  
3-42  Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual  020-100001-07 Rev. 1 (11-2009) 
Network Routing 
NOTE:  Not applicable for stand-alone projectors or simple serial networks with only 
one type of controller and linking. 
Separate
RS232 and RS422 Joined
Ethernet Joined
All Joined RS232 and  1.
2.
3.
4.
 
SEPARATE: 
Select “Separate” (factory default) to keep RS232, RS422 and Ethernet 
messages on their respective paths instead of being broadcast to the...

 Section 3: Operation 
Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual  3-43 020-100001-07 Rev. 1 (11-2009) 
 
IP ADDRESS: Enter a valid and unique IP address for use on the network to which the 
projector is currently connected. This address will overwrite any previous IP address 
such as the projector’s factory-defined default (0.0.0.0), or one that has been assigned 
by a DHCP server or other user. It takes approximately 10 seconds for the projector to 
respond at its new...

Section 3: Operation  
3-44  Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual  020-100001-07 Rev. 1 (11-2009) 
ArtNet BASE CHANNEL: When advanced mode is enabled, the projector listens to data 
on 64 consecutive channels, or 10 consecutive channels when advanced mode is not 
enabled. The projector processes requests that come on either 10 or 64 consecutive 
channels beginning with the ‘base channel’ defined here. The requests implement the 
following functions: 
  
* Functions are...

 Section 3: Operation 
Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual  3-45 020-100001-07 Rev. 1 (11-2009) 
Backlight 
Toggle to turn the built-in keypad backlighting on and off. 
Front IR / Back IR 
As needed for your application, set to “any” so that the front and/or rear IR sensor 
locations on the projector respond to the IR keypad. Set to “off” to disable. 
To disable both IR sensors, you cannot use the IR remote keypad to select the second 
OFF setting. This safeguard...

Section 3: Operation  
3-46  Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual  020-100001-07 Rev. 1 (11-2009) 
Brightness Uniformity — SUBMENU 
Brightness Uniformity provides further refinement of displays already matched for 
their primary colors and overall light output. Use Brightness Uniformity to create an 
exceptionally smooth image in which no area appears brighter and/or more red, green 
or blue than another. In the Brightness Uniformity menu, enable the “Uniformity 
Enable”...

 Section 3: Operation 
Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual  3-47 020-100001-07 Rev. 1 (11-2009) 
DEFINING “USER” COLOR GAMUTS: In some cases, you may find that none of the pre-
defined “Select Color Adjustment” options exactly suit your needs. For example, you 
may require a unique color gamut (range) for a single projector or application, or you 
may need to precisely match colors across multiple adjacent displays. In such cases, 
use the Color Adjustments by X,Y or...

Section 3: Operation  
3-48  Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual  020-100001-07 Rev. 1 (11-2009) 
 
Figure 3.11. CIE 1931 Chromaticity Diagram (without Yellow Notch Filter) 
NOTE: Keep new x,y coordinates within the original color gamut triangle shown 
here. 
PROCEDURE FOR X,Y ADJUSTMENTS:  See 3.10, Using Multiple Projectors. 
COLOR SATURATION: Use this submenu 
if you do not have specific color 
coordinates in mind and will simply 
judge color performance by eye or...

 Section 3: Operation 
Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual  3-49 020-100001-07 Rev. 1 (11-2009) 
Black Level Blending — SUBMENU 
Black Level Blending is a feature that eliminates the differences between black levels 
when edge blending multiple projectors. The Black Level Blending submenu provides 
many controls to allow the edges of adjacent images to be smoothly overlapped 
creating a “seamless” image. Black Level Blending provides a simple solution for 
uneven black...

Section 3: Operation  
3-50  Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual  020-100001-07 Rev. 1 (11-2009) 
NOTES: 1) See System Configuration – Diagnostics/Calibration, ILS Calibration 
for further details about calibration. 2) ILS
 control is a preference setting and will 
be retained between power cycles. 
 
Test Pattern 
Choose the desired internal test pattern to 
display, or select OFF to turn off a test 
pattern. Alternatively, use the 
Te s t key 
for cycling through test...