Christie Projector Mirage S+/HD/WU User Manual

 Section 3: Operation 
Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual  3-11 020-100001-07 Rev. 1 (11-2009) 
 
If at any time you are uncertain what to do next, press Hel p to display summary 
information about the current menu or highlighted option. Press Hel p again to exit. In 
addition, a line of “hint” text is included at the bottom of some menus. 
Enable a notice upon power-up
indicating the lamp has logged a given
number of hours as specified by 
the lamp limit (default is...

Section 3: Operation  
3-12  Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual  020-100001-07 Rev. 1 (11-2009) 
Once selected, change the setting as desired (see below) and press  to save and 
return to the current function menu. 
Slide bars in menus – The current value for a given 
parameter, such as size or vertical stretch, appears to the left 
of its slide bar icon (adjustment window). This number often expresses a percentage, 
or it may have units associated with it (such as...

 Section 3: Operation 
Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual  3-13 020-100001-07 Rev. 1 (11-2009) 
1.
2.
3.
4.
5.
6.
7.
8.
9.
0.Baud Rate for RS232
Baud Rate for RS422
Projector
Network Routing
Ethernet Settings
Broadcast Key
Backlight
Front IR
Back IR
Wired Keypad115200
115200
004
All Joined
Off
On
On
Communications
Separate
RS232 and RS422 Joined
Ethernet Joined
All Joined RS232 and  1.
2.
3.
4.
 
Example of Pull-Down List 
If you prefer to quickly scroll through a list...

Section 3: Operation  
3-14  Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual  020-100001-07 Rev. 1 (11-2009) 
NOTE: Press Ex i t at any time to cancel changes and return to the previously defined text. 
Enter numbers directly from the keypad in order to specify numbers representing 
projectors, channels (source setups), or slots. As each digit is entered, it is displayed 
and the cursor moves on. Note that channel numbers are defined with two digits—for 
example, if you enter only a...

 Section 3: Operation 
Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual  3-15 020-100001-07 Rev. 1 (11-2009) 
you choose for a VCR source may be very different from those you choose for a high-
resolution computer source, or one signal may simply vary from another signal used 
previously through the same input location. Once you have adjusted a display 
parameter, such as pixel tracking or contrast, all current settings are collectively stored 
in the projectors memory as a unique...

Section 3: Operation  
3-16  Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual  020-100001-07 Rev. 1 (11-2009) 
NOTES: 1) The current 
channel is highlighted upon 
entering the channel list, 
or, if this channel is not 
displayed here, the first 
channel in the list is 
highlighted. 2) Channels 
created automatically do 
not appear in the channel 
list unless a parameter for 
the channel has been changed. 
All available channels are listed in the Channel Setup menu, which describes...

 Section 3: Operation 
Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual  3-17 020-100001-07 Rev. 1 (11-2009) 
Table 3.2. Abbreviations for Signal Type 
Abbrev.Signal Type
4WH Composite (4 wire) on HC input 
4WVComposite (4 wire) on V input 
SG Sync-on-green
5WSeparate H,V
5WR Separate H,V swapped
SVid S-Video
CVid Composite Video
Dig Digital
 
FUNCTIONS WITHIN THE CHANNEL SETUP MENU —
To copy, delete or edit a channel, 
highlight the desired channel in the Channel Setup menu and do...

Section 3: Operation  
3-18  Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual  020-100001-07 Rev. 1 (11-2009) 
 
Figure 3.5. Deleting a Channel 
TO DELETE MULTIPLE CHANNELS highlight any channel in the Channel Setup menu 
and press 
Fu n c to go to the Channel Copy/Delete submenu. Select “Delete Unlocked 
Only” and press 
 to delete all unlocked channels. Select “Delete All Channels” to 
delete all channels, even those that are locked. In either case, the current channel will 
remain...

 Section 3: Operation 
Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual  3-19 020-100001-07 Rev. 1 (11-2009) 
NOTES: 1) If you enter a channel number that already exists; a dialog message 
appears indicating that this number is already in use–assign a different channel 
number.  2) You can define up to 50 channels. 
 
INPUT: 1-8, corresponding to where on the projector’s input panel the source is 
connected. 
 
IN MENU: If checked (default, except for automatically defined channels...

Section 3: Operation  
3-20  Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual  020-100001-07 Rev. 1 (11-2009) 
Use Auto Setup (Au to) 
For a good and efficient first step in perfecting the image, press
Au to. This initiates an 
automated process in which the projector quickly optimizes critical display parameters 
such as size, position, pixel tracking, etc., based on the type of incoming source data 
detected. An Auto Setup can save considerable setup time, and you can still modify...