Christie Projector Mirage 4K35 User Manual

   Content
Mirage 4K35 User Manual11
020-101377-03 Rev. 1 (07-2015)
Remove the liquid cooling reservoir   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Filtration  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Replace the light engine air filter   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Replace the liquid cooling air filter   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

   Content
Mirage 4K35 User Manual12
020-101377-03 Rev. 1 (07-2015)
Run the projector interrogator   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Save TPC log files  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Specification  . . . . . . . .  . . . . . . . . . . . . . . . . . . . . .  . . . . . . . . . . . . . . . . . . . 86
Display  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Mirage 4K35 User Manual13
020-101377-03 Rev. 1 (07-2015)
Introduction
This manual is intended for professionally trained  operators of Christie high-brightness projection 
systems. These operators are qualified to replace th e lamp and air filters, but should not attempt to 
install or service the projector.
Only qualified Christie technicians who are knowle dgeable about the hazards associated with high-
voltage, ultraviolet exposure, and the high temp eratures generated by the projector lamp are...

   Introduction
Mirage 4K35 User Manual14
020-101377-03 Rev. 1 (07-2015)
Installation safety and warning guidelines
AC/power precautions
To correctly install this projector, a certified electrician must install a permanent three-phase 
connection to the lamp power supply (LPS). The LPS  projector outlet is used to supply power to the 
projector head. Operate the projector at the recommended voltage.
Danger!  Failure to comply with the followin g results in death or serious injury.
• This product must be...

   Introduction
Mirage 4K35 User Manual15
020-101377-03 Rev. 1 (07-2015)
Lamp precautions
Lamps used in the projector are under high pressure and must be handled with caution. Lamps can 
explode and cause serious personal injury if dropped or mishandled.
Danger!  Failure to comply with the followin g results in death or serious injury.
• Never attempt to access the lamp compartment while the lamp is on. Wait at least 10 minutes after  the lamp turns off before powering down, disc onnecting from AC, and...

   Introduction
Mirage 4K35 User Manual16
020-101377-03 Rev. 1 (07-2015)
Product safety labels
Indicates the presence  of a grounding point.
Indicates the presence of  an earth grounding point.
Indicates the presence of a dangerous condition or situation.
Indicates the presence of a pinch hazard. To avoid personal injury, ke ep hands clear and loose clothing 
tied back.
Indicates the presence of a hot surface. To avoid pe rsonal injury, always allow the projector to cool 
down for a minimum of 10 minutes...

   Introduction
Mirage 4K35 User Manual17
020-101377-03 Rev. 1 (07-2015)
Indicates the presence  of a fire hazard. To avoid personal in jury and property damage, always adhere 
to the instructions desc ribed in this manual.
Always disconnect all power so urces before performing mainte nance or service procedures.
See the product user manual for sp ecific information and directions.
See the product service manual for sp ecific information and directions.
Never look directly into the projector lens. The...

   Introduction
Mirage 4K35 User Manual18
020-101377-03 Rev. 1 (07-2015)
Projector overview
The Mirage 4K35 is a professional quality, easy -to-use, split-body projector using Digital Light 
Processing (DLP™) technology from Texas Instruments. Its unique separation of projector and lamp 
power supply means both parts can be installed wi th greater ease, providing the ideal solution for 
tight spaces and challenging installations. In tegrating smoothly into traditional projection 
environments, the Mirage...

   Introduction
Mirage 4K35 User Manual19
020-101377-03 Rev. 1 (07-2015)
• RS232 ports for communication
• 4x Option slots accepting a variety of digital video input option cards
• 3D Sync input/output port
• LiteLOC™ feature for constant image brightness
• LampLOC™ feature for motorized three-axis lamp alignment
• Electronically operated “quick” douser
• Motorized lens mount
• LED indicators on the rear corners of the  projector for easy-to-read status indication
• Replaceable air filters (no tools...

   Introduction
Mirage 4K35 User Manual20
020-101377-03 Rev. 1 (07-2015)
•Warranty card
•Shroud
• Access keys
• Web registration form
Verify the following components were received  with the Lamp Power Supply (P/N: 129-003104-XX):
• 10’ line cord (250V/10A)
• Harness package (includes four cables)