Christie Projector DWX600-G User Manual

							G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 6: Specifications
6-7
 
y WXGA 0.65" 1280 x 800 or HD 0.65" 1920 × 1080 resolution or WUXGA 
0.67" 1920 × 1200 resolution
 
y Projection lens compatibility:
 
-
Horizontal offset ranges: +/-20%
 
-
Vertical offset ranges: +/-100% (WUXGA/WXGA) and +/-120% (HD)
 
y Dynamic aperture enabled (full white to full dark contrast ratio): 500\
0:1 
(Nominal)
 
y Dual Processing Warp Module for edge blending and geometric correction. \
(Optional)
 
y Wireless desktop display using wireless dongle (optional)
 
y SNMP traps and e-mail notifications
 
y Single mercury lamp illumination with 465W (DWH600-G/DHD600-G/
DWU600-G)
 
y 10-bit image processor electronics with modular design
 
y All video formats can be resized to full screen either horizontally or 
vertically while maintaining aspect ratio
 
y The projector can be operated using any of the following: 
 
-
The built-in keypad, an infrared (IR) remote control, a wired remote 
control, a PC/device using serial communications (Ethernet or RS232)
 
-
A Web page via Ethernet or from a PC/device via a wireless USB 
dongle. (Optional)
 
y Weight:
 
-
Maximum product weight (with lens removed): 15kg (33lb.)
 
y Built-In keypad
6.3  Key Features
NOTE:
 
™Measurements are based on industry standards where offset is calculated \
as a ratio of the number of pixels shifted up/
down to half the image size. 
						

							G Series User Manual020-000648-01  Rev. 3 (02-2014)6-8
This projector comes with all the items shown below. Check to make sure your 
package is complete. Contact your dealer if anything is missing.
6.4  List of Components
 
y IR remote control 003-004468-01
 
y Power cord x 4
 
-
UK/Korea/Russia
 
-
North America
 
-
Europe
 
-
Japan
 
y DVI to HDMI dongle
 
y User manual (CD)
NOTE:
 
™Due to the difference in applications for each country, some regions may\
 have different accessories.
6.5  Optional Accessories
 
y Cable cover (140-103105-01)
 
y Standard Lens (A05) (140-100102-01)
 
y Optional Lens (A01) (140-101103-01)
 
y Optional Lens (A03) (140-102104-01)
 
y 1DWUSB-BGN / Wireless dongle (optional accessory) (133-113106-01)
 
y Dual Processor Warp Module (optional accessory) (133-111104-01) 
						

							G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 6: Specifications
6-9
 
y Safety
 
-
CSA C22.2 No. 60950-1
 
-
UL 60950-1
 
-
IEC 60950-1
 
-
EN 60950-1
 
y Electro-Magnetic Compatibility
Emissions  
-
FCC CFR47, Part 15, Subpart B/ANSI C63.4, Class A – Unintentional 
Radiators
 
-
CISPR 22/EN55022 Class A - Information Technology Equipment
 
-
ICES/NMB003 (A) - Information Technology Equipment
Immunity  
-
CISPR 24/EN55024 EMC Requirements - Information Technology 
Equipment 
 
y Environmental
 
y The product conforms to:
 
-
EU Directive (2011/65/EU) on the restriction of the use of certain 
hazardous substances (RoHS) in electrical and electronic equipment 
and the applicable official amendment(s).
 
-
EU Regulation (EC) No. 1907/2006 on the registration, evaluation, 
authorization and restriction of chemicals (REACH) and the applicable \
official amendment(s).
 
-
EU Directive (2012/19/EU) on waste and electrical and electronic 
equipment (WEEE) and the applicable official amendment(s).
 
-
China Ministry of Information Industry Order No.39 (02/2006) on the 
control of pollution caused by electronic information products, the 
hazardous substances concentration limits (SJ/T11363-2006), and the 
applicable product marking requirement (SJ/T11364-2006).
 
y Marking
 
-
This product conforms to all relevant Canadian, US, and European 
directives, standards, safety, health and environmental concerns. 
International packaging recycling marks conform to:
 
`EU Directive (2012/19/EU) on waste and electrical and electronic 
equipment (WEEE) .
 
`EU Directive (94/62/EC) on packaging and packaging waste
 
`China packaging recycling mark standard (GB18455-2001)
6.6  REGULATORY 
						

							G Series User Manual020-000648-01  Rev. 3 (02-2014)6-10
6.7  Federal Communications Commission (FCC) Warning
WARNING
 
y A shielded-type power cord is required in order to meet FCC emission 
limits and also to prevent interference to the nearby radio and televisi\
on 
reception. It is essential that only the supplied power cord be used.
 
y Use only shielded signal cables to connect I/O devices to this equipment\
. 
						

							G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 6: Specifications
6-11
6.8  OSD Tree
Level 1Level 2 Level 3(Or List) Level 4(Or List) Level 5(Or List) Level 6(Or List) Default
Size & 
Position Size Presets
Auto
Auto
Native
4:3
Letterbox Full Size
Full Width
Full Height Custom
Overscan Off 
By source set
Zoom
Crop
Pixel Track 0 - 100 50
Pixel Phase 0 - 100 50
Horz Position 0 - 100 50
Vert Position 0 - 100 50
Digital Horz Zoom 50%~400% 100
Digital Vert Zoom 50%~400% 100
Digital Horz Shift 0 - 100 50
Digital Vert Shift 0 - 100 50
Geometry 
Correction Off
Off
Basic Horz Keystone
0 - 100  
(0-20 for GEO  model) 50  
(10 for GEO  model)
Vert Keystone 0 - 100 (0-20 for 
GEO model) 50  
(10 for GEO  model)
Horz Pincushion 0 - 100 50
Vert Pincushion 0 - 100 50
Pincushion/Barrel 0-20 10
4-Corner Top Left  
Horz adjust. 0-140
0
Top Left  
Vert adjust. 0-80
0
Top Right   
Horz adjust. 0-140
0
Top Right   
Vert adjust. 0-80
0
Bottom Left   
Horz adjust. 0-140
0
Bottom Left    Vert adjust. 0-80
0
Bottom Right   Horz adjust. 0-140
0
Bottom Right   Vert adjust. 0-80
0
Curve Curve
Top Arc
0-400200
Bottom Arc 0-400200
Left Arc 0-400200
Right Arc 0-400200
4-Corner Top Left Horz 
adjust. 0-160
0
Top Left Vert  adjust. 0-80
0
Top Right  Horz  adjust. 0-160
0
Top Right  Vert  adjust. 0-80
0 
						

							G Series User Manual020-000648-01  Rev. 3 (02-2014)6-12
Level 1Level 2 Level 3(Or List) Level 4(Or List) Level 5(Or List) Level 6(Or List) Default
Size & 
Position Geometry 
Correction Curve
4-CornerBottom Left  Horz 
adjust. 0-140
0
Bottom Left  Vert  adjust. 0-80
0
Bottom Right   Horz adjust. 0-140
0
Bottom Right   Vert adjust. 0-80
0
Rotate Rotation
0-16 8
4-Corner Top Left Horz 
adjust. 0-140
0
Top Left Vert  adjust. 0-80
0
Top Right  Horz  adjust. 0-140
0
Top Right  Vert  adjust. 0-80
0
Bottom Left  Horz  adjust. 0-140
0
Bottom Left  Vert  adjust. 0-80
0
Bottom Right   Horz adjust. 0-140
0
Bottom Right   Vert adjust. 0-80
0
Auto Image command
Image 
settings Brightness
0 - 100 50
Contrast 0 - 100 By source set
Color Space Auto
Auto
RGB RGB
RGB
RGB Video
REC709
YUV REC709
REC709
REC601
Detail Maximum
By source set
High
Normal Low
Minimum
Video Options Color
0 - 100 50
Tint 0 - 100 50
Noise Reduction 0 - 100 0
Flesh Tone   Correction 0 - 100
0
Video Black Level Detect Film Off/On Off
Closed captions Off
Off
cc1
cc2
Input Levels Red Gain
0 - 100 50
Green Gain 0 - 100 50
Blue Gain 0 - 100 50
Red Offset 0 - 100 50
Green Offset 0 - 100 50
Blue Offset 0 - 100 50
Sync Threshold 0 - 100 50
Reset RGB Gain/ Offset command 
						

							G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 6: Specifications
6-13
Level 1Level 2 Level 3(Or List) Level 4(Or List) Level 5(Or List) Level 6(Or List) Default
Image 
settings Picture Settings
Presentation
By source set
Video
Bright
Whiteboard Blackboard Beige Wall Real
DICOM SIM
Save to User User
DynamicBlack command Off
Image Freeze Off / On Off
Advanced Image  Settings Gamma
Video
By source set
Film
Bright CRT
DICOM
BrilliantColor
TMNormal Look Bright
Bright Look
White Peaking 0 - 100 By source set
Color 
Temperature Warmest
By source set
Warm
Cool
Bright
Edge 
Enhancement Off
Off
Normal
Maximum
Color Wheel  Speed 2X
2X
3X
Color 
Enhancement Off
CE1
CE 1 
CE 2
Configuration Language
SPEC define English
Lens settings Focus
command
Zoom command
Lens Shift command
Lock all Lens  Motors Allow 
Allow
Locked
Lens center  calibration command
Ceiling Mount Off/On/Auto Auto
Rear Projection Off/On Off
Menu Preferences Menu Horz Offset 0 - 100
0
Menu Vert Offset 0 - 100 0
Show Messages off/on on
Menu 
Transparency 0 - 90
0
Splash Screen  Setup Factory Logo
Factory Logo
Blue
Black
White
PIN Protect command
Change PIN command 
						

							G Series User Manual020-000648-01  Rev. 3 (02-2014)6-14
Level 1Level 2 Level 3(Or List) Level 4(Or List) Level 5(Or List) Level 6(Or List) Default
Configuration Power Management
Standby Mode
0.5 W Mode
Communication 
mode
Communication 
Mode
AC Power On off/on  off
Auto shutdown Never
Never
5 Mins
10 Mins
15 Mins
20 Mins
25 Mins
30 Mins
Sleep Timer Off
Off
2 Hrs
4 Hrs
6 Hrs
High Altitude Off/On Off
Communications LAN
DHCP
by set
IP Address
Subnet Mask
Default Gateway MAC Address
WLAN Enable
by set
Start IP
End IP
Subnet Mask
Default Gateway MAC Address SSID
Password
Network Projector Name
by set
Show Network 
Messages
Restart Network… Network Factory  Reset…
Serial Port Baud  Rate 2400
115200
4800
9600
14400
19200
38400
57600
115200 1200
Serial Port Echo Off/On Off
Projector Address 0 - 9 0
Image Blending Blending
On/Off Off
Marker On/Off Off
Grid Off/White/Red/
Green/Blue Off
Solid Color Off/White/Red/
Green/Blue Off 
						

							G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 6: Specifications
6-15
Level 1Level 2 Level 3(Or List) Level 4(Or List) Level 5(Or List) Level 6(Or List) Default
Configuration Image Blending
Overlap
TOP
0… ½ Output 
Height(Pixel) 0
Bottom 0… ½ Output 
Height 0
Left 0… ½ Output 
Width 0
Right 0… ½ Output 
Width 0
Bright Adj. Blending Area 
offset 0-2000
1000
non-Blending  Area Offset 0-2000
1000
Drop Off Curve 70-300 100
Image Gamma 1.8/2.0/2.2/2.4/2.6 2.2
Color Matching Meter Adjustment Enable
On/Off Off
Auto Test Pattern On/Off On
Measured Data Intensity of Red 100 - 10000
453
x of Red 0.300 - 0.700 0.633 y of Red 0.300 - 0.500 0.356
Intensity of Green 100 - 10000 2137 x of Green 0.300 - 0.400 0.352
y of Green 0.400 - 0.700 0.572
Intensity of Blue 100-10000 239
x of Blue 0.100 - 0.300 0.140 
y of Blue 0.030 - 0.400 0.093 
Intensity  of White 100-10000 9219
x of White 0.200 - 0.400 0.331 y of White 0.200 - 0.400 0.380 
Reset to Default Yes/No
Target Data Gain of Red 0.200 - 1.000 1.000 
x of Red 0.300 - 0.700 0.643y of Red 0.300 - 0.500 0.344
Gain of Green 0.200 - 1.000 1.000  x of Green 0.300 - 0.400 0.329
y of Green 0.400 - 0.700 0.544
Gain of Blue 0.200 - 1.000 1.000  x of Blue 0.100 - 0.300 0.141
y of Blue 0.030 - 0.400 0.094 
Gain of White 0.200 - 1.000 1.000  x of White 0.200 - 0.400 0.334y of White 0.200 - 0.400 0.371
Reset to Default Yes/No
Manual 
Adjustment Enable
On/Off Off
Auto Test Pattern On/Off On
Red Part of Red 0 - 1000 1000
Green Part of Red 0 - 1000 0
Blue Part of Red 0 - 1000 0
Green Part of  Green 0 - 1000
1000
Red Part of   Green 0 - 1000
0
Blue Part of   Green 0 - 1000
0
Blue Part of Blue 0 - 1000 1000
Red Part of Blue 0 - 1000 0
Green Part of  Blue 0 - 1000
0 
						

							G Series User Manual020-000648-01  Rev. 3 (02-2014)6-16
Level 1Level 2 Level 3(Or List) Level 4(Or List) Level 5(Or List) Level 6(Or List) Default
Configuration Color Matching
Manual 
Adjustment Red Part of White 0 - 1000
1000
Green Part of  White 0 - 1000
1000
Blue Part of White 0 - 1000 1000
Reset to Default Yes/No
Hot-Key settings Blank Screen
Aspect Ratio
Freeze Screen Projector Info Overscan
Closed Captions
Service Projector Info
Model Name
Serial Number
Native Resolution Firmware
Configuration Boot Code
Standby Mode
Lens Lock Settings
Color wheel Index
FactoryReset… command
Test pattern Off
Grid
White Black
Checkerboard Color Bars Red
Green Blue
Yellow
Magenta Cyan
Boresight
Color wheel Index  (2x) TBD
Color wheel Index  (3x) TBD
Error log Show log
Clear log
Mode Adjustment