Christie Projector DWX600-G User Manual

							G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 4: Operation
4-22
4.9  Web User Interface
4.9.1 Logging On
Open your web browser and type the IP address (in the address bar) assigned 
to your projector.
1 Select the log in level from the Access type drop-down list
2 Enter the Password in the Password field
3 Select the appropriate language from the Language drop-down list.
4 Click the Press login button. The Main window appears. 
4.9.2 Main Tabbed Page – General 
						

							G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 4: Operation
4-23
 
y Control Panel
 Select main source / PIP source, enable/disable PIP/PBP, change the 
layout / PIP size, swap, and change the test pattern. 
 
y Projector Information Panel
 Check the projector information for power status, Pic mute status, OSD 
status, IP address and Mac address.
 
y Switch Panel
Switch the on/off status of power, Pic mute, and OSD.
4.9.3 Main Tabbed Page – Status
 Display the current status of lamp info, cooling (fans), version numbe\
rs and 
signal (source) information 
						

							G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 4: Operation
4-24
4.9.4 Main Tabbed Page – Lens
 Control the focus, lens shift and zoom adjustments for the lens.
4.9.5 Network 
						

							G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 4: Operation
4-25
 
y Restart Network
Execute a Network restart. This will not change any of the network 
settings.
 
y Network Factory Reset
Execute a network factory reset. Network settings will be reset to 
the following default values:
 - Projector Name = Christie@ + Serial Number
 - Show Network Messages = ON
 - LAN Settings:
 - Manual
 -IP Address = 192.168.0.100
 - Subnet Mask = 255.255.255.0
 - Default Gateway = 192.168.0.100
 - WLAN Settings:  - Enabled
 -Start IP = 192.168.1.100
 - End IP = 192.168.1.120
 - Subnet Mask = 255.255.255.0
 - Default Gateway = 192.168.1.100
 - SNMP Settings:  - SNMP Read Communication = private
 - Trap IP Address = 0.0.0.0
 - SMTP IP Address = 0.0.0.0
 - All other settings are cleared/blanked
 - Trap Configuration:
 - All items = SNMP Trap + Email
 
y LAN Setting Panel
 -   Select if the projector must obtain an automatically assigned IP address\
 
through DHCP or if the user will set the address manually.
 - Enter the IP address, netmask, default gateway and DNS server  address for the TCP/IP setting.
 
y WLAN Setting Panel
 -  Select if the wireless LAN of the projector is enabled or disabled. 
						

							G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 4: Operation
4-26
 - Enter the IP address range, netmask and default gateway for the wireless LAN.
 
y SNMP Panel 
 - The G Series SNMP (Simple Network Management Protocol) interface  provides network administrators with a common way to manage their 
network devices from a single remote location. SNMP allows an 
administrator to query a number of devices to see their current status/
configuration. It also allows operators to change configuration values 
and configure trap notifications to be sent when certain events occur. 
(eg. Loss of signal, power state change, etc)
 
`Emails are sent to the mail server configured in the projector 
settings. Up to 2 user email accounts can be selected. Any 
important information regarding the event will be located in the body 
content of the email.
 
`SNMP Traps are notifications that are sent from the projector. They 
are only received by a trap receiver (MIB Browser) in the computer.
 - SNMP Read Community (default setting: private) – this is a plain- text password. This must also be entered in the MIB browser. This 
password allows the various settings in the projector to be queried.
 - SNMP Location (default setting: blank) – This field can be used as a 
description to where a projector is located in a building. SNMP emails 
sent will specify this location.
 - Trap IP Address (default setting: 0.0.0.0) – This field must be filled in to 
receive Traps from the projector. The Trap IP Address should be filled 
in with the IP Address of the computer on which you would like to view 
received traps.
 - Trap Email 1/2 (default setting: Blank) – The Trap Email 1 and 2 mu\
st  be set to an email address that is configured under the mail server that 
you will enter in the “SMTP Server IP Address” field.
 - Email from Address (default setting: blank) – the “Email from Address” 
that will appear as the source of the SNMP emails.
 - SMTP Server IP Address (default setting: 0.0.0.0) – Enter your mail\
  server’s IP address.
 
y Trap Configuration Panel
 Set the SNMP actions for the system events. The dropdown options are: 
SNMP Trap + Email, Email, SNMP Trap, and Disabled. 
						

							G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 4: Operation
4-27
4.9.6 Tools
 Use the Tools tabbed pages to control “Size & Position”, “Image Settings”, 
“Configuration”, “Lamp”, “Input Switching & PIP” and “Test Pattern”. 
4.9.7 Administrator Page
 Add or delete a user or change password 
						

							G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 4: Operation
4-28
4.9.8 About Page
 
y Version Tab
 View the main firmware version, network firmware version, projector model 
name, and projector serial number.
 
y License Tab
 The license information of the computer program is displayed. 
						

							G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 4: Operation
4-29
4.10  Christie Presenter
The Christie Presenter application allows a remote desktop from a host P\
C 
to be displayed on the network display through Ethernet, USB, or wireles\
s 
transports. It can adapt to different network settings (DHCP, fixed IP, and 
direct link by USB/Ethernet cable).
Christie Presenter can be downloaded from the Christie website or from t\
he 
web page of the projector. 
4.10.1 Connect to the Projector
1.  Connect to the projector using WiFi or Ethernet - Ethernet connection:
 
`Determine the projector’s IP address from the menu Main Menu > 
Configuration > Communications > LAN
 
`Configure your PC IP address to be on the same network as the 
projector.
 
`The projector and computer must be connected directly or over the 
network via Ethernet.
 - WiFi  Wireless connection:
 
`Insert the WiFi USB dongle (1DWUSB-BGN) into the USB port on 
the projector input panel. 
Insert the WiFi USB dongle 
						

							G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 4: Operation
4-30
 
`Power on the Projector.
 
`Obtain the WiFi SSID from the OSD menu Main Menu > 
Configuration > Communications > WLAN
 
`Connect your PC device to the wireless SSID for the selected 
projector . Example:  “Christie@0111000123”.
4.10.2 Install Christie Presenter software
1.  Use a web browser to connect to the projector’s network address (Def\
ault 
address 192.168.1.100)
2.  Download and install the Christie Presenter Software 
						

							G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 4: Operation
4-31
3. Configure the Christie Presenter Software. The name entered is used to 
identify all computers connected to the projector via  the Christie Pres\
enter 
software via either wired or wireless connections.  The Network Display \
Management -> Device Management tab will show all current connections.
4.10.3 Use Christie Presenter
1. Press the autorun icon in the system tray to pause or play the USB display.