Christie Projector DWX600-G User Manual

							USER MANUAL
020-000648-01
G Series
DWX600-G/DHD600-G/DWU600-G 
						

							Addendum
The CD included with this printed manual contains an electronic copy in English. Please read all instructions before 
using or servicing this product.
Die mit dieser gedruckten Anleitung gelieferte CD enthält eine elektronische Kopie in Deutsch. Bitte lesen Sie alle 
Anweisungen, bevor Sie dieses Produkt verwenden oder warten.
Le DC fourni avec ce manuel imprimé contient une copie électr onique en français. Sil vous plaît lire toutes les 
instructions avant dutiliser ou de réparer ce produit.
Il CD fornito con il manuale stampato contiene una copia elettronica in lingua italiano. Si prega di leggere tutte le 
istruzioni prima di utilizzare o riparare questo prodotto.
El DC incluido con este manual impreso contiene una copia elect rónica en español. Por favor, lea todas las 
instrucciones antes de usar o dar servicio a este producto.  
						

							NOTICES
COPYRIGHT AND TRADEMARKS
© 2014 Christie Digital Systems USA, Inc. All rights reserved.
All brand names and product names are trademarks, registered trademarks \
or trade names of 
their respective holders.
REGULATORY
The product has been tested and found to comply with the limits for a Cl\
ass A digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provi\
de reasonable protection 
against harmful interference when the product is operated in a commercia\
l environment. The 
product generates, uses, and can radiate radio frequency energy and, if \
not installed and used in 
accordance with the instruction manual, may cause harmful interference t\
o radio communications. 
Operation of the product in a residential area is likely to cause harmfu\
l interference in which case 
the user will be required to correct the interference at the user’s o\
wn expense. 
WARNING! Changes or modifications not expressly approved by Christie could void the user’s 
authority to operate the product.
FOR COMMERCIAL USE ONLY - POUR USAGE COMMERCIAL UNIQUEMENT
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT\
 
TO THE FOLLOWING 2 CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL 
INTERFERENCE (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, 
INCLUDING ANY INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS CLASS A DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN 
INTERFERENCE-CAUSING EQUIPMENT REGULATIONS.
CET APPAREIL NUMÉRIQUE DE CLASSE A EST CONFORME AUX NORMES DÉFINIE\
S 
DANS LES RÉGLEMENTATIONS CANADIENNES SUR LES APPAREILS CAUSANT 
DES INTERFÉRENCES RADIO (CANADIAN INTERFERENCE-CAUSING EQUIPMENT 
REGULATIONS, ICES-003, CLASS A).
         
  ,       . 
						

							GENERAL
Every effort has been made to ensure accuracy, however in some cases cha\
nges in the products 
or availability could occur which may not be reflected in this document. Christie reserves the right 
to make changes to specifications at any time without notice. Performance specifications are 
typical, but may vary depending on conditions beyond Christie's control \
such as maintenance of 
the product in proper working conditions. Performance specifications are based on information 
available at the time of printing. Christie makes no warranty of any kind with regard to this material, 
including, but not limited to, implied warranties of fitness for a particular purpose. Christie will not 
be liable for errors contained herein or for incidental or consequential\
 damages in connection with 
the performance or use of this material.
The product is designed and manufactured with high-quality materials and\
 components that can 
be recycled and reused. This symbol 
 means that electrical and electronic equipment, at their 
end-of-life, should be disposed of separately from regular waste. Please\
 dispose of the product 
appropriately and according to local regulations. In the European Union,\
 there are separate 
collection systems for used electrical and electronic products. Please h\
elp us to conserve the 
environment we live in!
Canadian manufacturing facility is ISO 9001 and 14001 certified.
GENERAL WARRANTY STATEMENTS
For complete information about Christie’s limited warranty, please co\
ntact your Christie dealer. In 
addition to the other limitations that may be specified in Christie’s limited warranty, the warranty 
does not cover:
a.  Damage occurring during shipment, in either direction.
b.  Projector lamps (See Christie’s separate lamp program policy).
c.  Damage caused by use of a projector lamp beyond the recommended lamp lif\
e, or use of a lamp  supplied by a supplier other than Christie.
d.  Problems caused by combination of the product with non-Christie equipmen\
t, such as distribution  systems, cameras, video tape recorders, etc., or use of the product with\
 any non-Christie interface 
device.
e.  Damage caused by misuse, improper power source, accident, fire, flood, lightening, earthquake or 
other natural disaster.
f.  Damage caused by improper installation/alignment, or by product modification, if by other than a 
Christie authorized repair service provider.
g.  For LCD projectors, the warranty period specified applies only where the LCD projector is in “normal 
use.” “Normal use” means the LCD projector is not used more than 8 hours a day, 5 days a week. 
For any LCD projector where “normal use” is exceeded, warranty coverage under this warranty 
terminates after 6000 hours of operation.
h.  Failure due to normal wear and tear.
PREVENTATIVE MAINTENANCE
Preventative maintenance is an important part of the continued and prope\
r operation of your 
product. Please see the Maintenance section for specific maintenance items as they relate to your 
product. Failure to perform maintenance as required, and in accordance w\
ith the maintenance 
schedule specified by Christie, will void the warranty. 
						

							G Series User Manual020-000648-01  Rev. 3 (02-2014)
Table of Contents
i
1.  SAFETY
2.  INTRODUCTION
2.1  Projector Components ........................................................................\
.......................... 2-1
2.2  Built-in Keypad ........................................................................\
..................................... 2-4
2.3  Input/Output (I/O) Panel ........................................................................\
....................... 2-5
2.4  Remote Control ........................................................................\
.................................... 2-6
2.5  LED Status Indicators ........................................................................\
...........................2-8
3.  INSTALLATION
3.1  Connect to Computer ........................................................................\
........................... 3-1
3.2  Connect to Video Equipment ........................................................................\
................ 3-2
3.3  Turn the Projector On ........................................................................\
........................... 3-3
3.4  Turn the Projector Off ........................................................................\
........................... 3-3
3.5  Adjust the Projector Position ........................................................................\
................ 3-4
3.6  Calculate Lens Offset ........................................................................\
........................... 3-5
3.7  Removing and Installing the Lens ........................................................................\
........ 3-11
3.8  Cable Cover Installation ........................................................................\
....................... 3-12
4.  OPERATION
4.1  Size and Position Menu ........................................................................\
........................ 4-2
4.2  Image Settings Menu ........................................................................\
............................ 4-7
4.3  Configuration Menu ........................................................................\
.............................. 4-10
4.4  Lamp Menu ........................................................................\
........................................... 4-15
4.5  Status Menu ........................................................................\
......................................... 4-16
4.6  Input Switching & PIP Menu ........................................................................\
................. 4-19
4.7  Language Menu ........................................................................\
.................................... 4-21
4.8  Test Pattern Menu ........................................................................\
................................ 4-21
4.9  Web User Interface ........................................................................\
............................... 4-22 4.9.1 Logging On ........................................................................\
.................................. 4-22
4.9.2 Main Tabbed Page – General ........................................................................\
..... 4-22
4.9.3 Main Tabbed Page – Status ........................................................................\
........ 4-23
4.9.4 Main Tabbed Page – Lens ........................................................................\
.......... 4-24
4.9.5 Network ........................................................................\
....................................... 4-24
4.9.6 Tools ........................................................................\
............................................ 4-27
4.9.8 About Page ........................................................................\
.................................. 4-28
4.10  Christie Presenter ........................................................................\
................................. 4-29 4.10.1 Connect to the Projector ........................................................................\
............ 4-29
4.10.2 Install Christie Presenter software ..................................................................... 4-30
4.10.3 Use Christie Presenter ........................................................................\
.............. 4-31
4.11  Card Reader Operation ........................................................................\
........................ 4-37
4.12  Install the Lamp ........................................................................\
.................................... 4-41
5.  TROUBLESHOOTING
6.  SPECIFICATIONS
6.1  Inputs ........................................................................\
.................................................... 6-1
6.2  PIP/PBP Compatibility ........................................................................\
.......................... 6-6
6.3  Key Features ........................................................................\
........................................ 6-7
6.4  List of Components ........................................................................\
............................... 6-8
6.5  Optional Accessories ........................................................................\
............................ 6-8
6.6  REGULATORY ........................................................................\
..................................... 6-9 
						

							G Series User Manual020-000648-01  Rev. 3 (02-2014)
Table of Contents
ii6.7  Federal Communications Commission (FCC) Warning ................................................ 6-10
6.8  OSD Tree ........................................................................\
............................................. 6-11
6.9  Preset Mode tables ........................................................................\
............................... 6-19 
						

							G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 1: Safety
1-1
1.  SAFETY
Read through this document in its entirety and understand all warnings a\
nd 
precautions before attempting to operate the projector.  
y Do not look into the projector lens when the lamp is on. The bright ligh\
t 
may result in permanent eye damage.
 
y To reduce the risk of fire or electric shock, do not expose this projector to 
rain or moisture.
 
y Do not open or disassemble the projector as this may cause electric shock.
 
y When replacing the lamp, allow the projector to cool, and follow all 
replacement instructions.
 
y When you turn the projector off, wait 180 seconds for the projector to cool 
down before you disconnect the projector from power. 
 
y Cooling the lamp during the ignition phase may lead to ignition failures\
. 
After a successful lamp ignition, keep the lamp burning for at least 5 
minutes to maintain lamp life.
 
y When the lamp is approaching the end of its life, the message “Lamp is 
approaching the end of its useful life in full power operation” appea\
rs on 
the screen. Change the lamp when the warning message appears.
 
y All installation and maintenance procedures must be performed by a 
Christie accredited service technician.
 
y Keep all combustible material away from the concentrated light beam of 
the projector. 
 
y Position all cables where they cannot contact hot surfaces or be pulled \
or 
tripped over.
WARNING 
						

							G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 1: Safety
1-2
 
y Always power down the projector and disconnect all power sources before \
servicing or cleaning.
 
y Use a soft cloth moistened with a mild detergent to clean the display 
housing.
 
y Disconnect the power plug from the AC outlet if the product is not being\
 
used for an extended period of time.
 
y Operate the projector under the following conditions:
 
-
Operating temperature range: 5°C to 35°C
 
-
Storage temperature range: -10°C to 60°C
 
-
Humidity range: 5% to 80 % RH (Max.), non condensing
 
-
Operating altitude: 10,000 ft. maximum
 
y Use only the AC power cord supplied. Do not attempt operation if the AC \
supply and cord are not within the specified voltage and power range for 
your region.
 
y Remove the lens plug from the lens opening in the projector before 
installing the lens. Retain the lens plug to protect the optical compone\
nts 
from dust and debris during transport.
 
y Do not block the ventilation slots and openings on the projector.
 
y Do not use abrasive cleaners, waxes or solvents to clean the projector.
 
y Do not allow anything to rest on the power cord. 
						

							G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 2: Introduction
2-1
2.  INTRODUCTION
The product specified in this document is a high brightness, high-resolution 
video/graphics 1-chip mercury lamp based projector. The projector is ava\
ilable 
in WXGA, HD and WUXGA resolutions. The projector utilizes Digital Light \
Processing (DLP
®) technology from Texas Instruments. It is primarily designed 
for fixed installation markets.
2.1  Projector Components
Front View
2
1
4
Ind. Part Name Description
1 Front IR Sensor Receives signals from the IR remote. Keep the signal 
path to the sensor unobstructed for uninterrupted 
communication with the projector.
2 Projection Lens Allows automated lens control and adjustment: vertical 
and horizontal offsets, zoom and focus.
3  Lens Ring Protects the lens motors and mechanism. Remove in 
order to insert or remove the lens.
4 Adjustable Feet Raise or lower the feet to level the projector.
3 
						

							G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 2: Introduction
2-2
Rear View1
5
2
3
6
4
Ind. Part NameDescription
1 Rear IR Sensor Receives signals from the IR remote. Keep the signal 
path unobstructed for uninterrupted communication 
with the projector.
2 Input/Output (I/O) 
Panel Connects the projector to external devices.
3 Cooling Air Vents 
(Exhaust) Keep these vents unobstructed to prevent the projector 
from overheating.
4 AC Input Connect to the supplied power adapter.
5 Power Button Switch the power button to turn on the power source.
6 Kensington Lock Use to secure the projector to countertops, tables, etc.