Christie Digital Systems L2k1500 Multimedia Projector Quick Reference Guide

- 9 -
English
020-000410-01 Rev.1 (05-2011)
r FOCUS  button
  Adjusts the focus.
e 
ZOOM button
  Zooms in and out the images.
q ON/STAND-B y button
  Turns the projector on or off. 
!0 INPUT  button
  Selects  an  input  source  Input  1,  Input  2,  Input  3  or 
Input 4. 
u 
AUTO PC AD j.  button
  Automatically adjusts the computer image to its 
optimum setting. 
y  POINT  buttons
  -  Select  an  item  or  adjust  the  value  in  the  On-Screen 
MENU.
   -  Pan the image in DIGITAL ZOOM + mode.
Side...

- 10 -020-000410-01 Rev.1 (05-2011)
Indicators
q
w
e
r
t
ye WARNING TEMP. indicator
  This indicator flashes red when internal projector 
temperature is too high. 
q 
POWER indicator
  This indicator lights green when the projector is 
ready to be turned on in standby mode. And it 
flashes green in Power Management mode. 
w  LAMP Indicator
  This indicator is dim when the projector is turned 
on. And bright when the projector is in stand-by 
mode.
r  WARNING FILTER indicator
  –  Lights orange when the...

- 11 -
English
020-000410-01 Rev.1 (05-2011)
Remote Control
!6 LIGHT button
  Lights the buttons on the remote control for about 10 seconds.
t 
MENU button
  Opens or closes the On-Screen MENU. 
y POINT ed 7 8 buttons
   –  Select an item or adjust the value in the ON-SCREEN MENU. )
   –Pan the image in DIGITAL ZOOM +/– mode. 
u  LENS SHIFT button
  Selects the LENS SHIFT function.
@0 
FOCUS buttons
  Adjusts the focus. 
i 
ZOOM buttons
  Zoom in and out the images.
!0 
FREEZE button
  Freezes the...

- 12 -020-000410-01 Rev.1 (05-2011)
Point the remote control toward the projector (to Infrared 
Remote Receivers). The operating distance and angle 
between the receivers and the remote control must be 
shorter than 16.4’ (5 m) and less than 60 degrees.
Infrared Remote Receivers are located on the front, rear, and 
top panels. You can activate only necessary receivers. 
Remote Control Receivers and Operating Range
  ✔Note:
•   When hanging the projector from the ceiling, select the Infrared R emote...

- 13 -
English
020-000410-01 Rev.1 (05-2011)
Terminals of Projector
The projector has two replaceable Interface board slots. The projector's functions can be extended by installing 
the optional interface boards into the terminal slots. 2 vacant slots (Input 3 and 4) are provided in your 
purchasing the projector.  For the Optional Interface Boards, contact sales dealer where you purchased the 
projector.
Pull out the interface board.Remove 2 screws from an interface board.
Tighten screws to secure...

- 14 -020-000410-01 Rev.1 (05-2011)
Connecting to Computer
VGA 
Cable 
Monitor Output  Desktop type
Laptop type
Terminals of
the projector Monitor Output 
DVI-D Cable 
BNC Cable 
Monitor Output 
Unplug  the  power  cords  of  both  the 
projector  and  external  equipment  from 
the AC outlet before connecting cables.
Cables used for connection 
• DVI-D cable       • Serial cross cable
• DVI/HDMI cable      • USB cable
• VGA Cable (D-sub 15 pin)	*
 ( *One cable is supplied;	Other cables are not supplied...

- 15 -
English
020-000410-01 Rev.1 (05-2011)
Connecting to Video Equipment
Video Source (example)
Professional Digital VCRVideo Disc Player
RGB SCART
21-pin Output
VIDEO/Y, Pb/Cb, Pr/Cr
Component video output equipment.  
(such as DVD player or 
high-definition TV source.)
BNC
Cable 
Digital Output
( HDCP compatible)
DVI-D Cable 
SCART-VGA
Cable
	
Unplug the power cords of both the projector 
and  external  equipment  from  the  AC  outlet 
before connecting cables.
S-Video OutputS-VIDEO
Cables used for...

- 16 -020-000410-01 Rev.1 (05-2011)
Turning On the Projector
Connect the projector’s AC power cord into an AC outlet. 
The LAMP indicator lights red and the POWER indicator 
lights green.
Press the ON/STAND-BY button on the side control 
or the ON button on the remote control. The LAMP 
indicator dims and the cooling fans start to operate. 
The preparation display appears on the screen and the 
countdown starts. 
2
3
1
The preparation display will disappear after 
20 seconds.
4After the countdown, the...

- 17 -
English
020-000410-01 Rev.1 (05-2011)
Press the ON/STAND-BY button on the side control or 
the STAND-BY button on the remote control, and Power 
off? appears on the screen.
Press the ON/STAND-BY button on the side control or 
the STAND-BY button on the remote control again to 
turn off the projector. The LAMP indicator lights bright 
and the POWER indicator turns off. 
1
2
3When the projector has cooled down enough, the 
POWER indicator lights green and then you can turn on 
the projector. 
Power...

- 18 -020-000410-01 Rev.1 (05-2011)
How to Operate the On-Screen Menu
Operating with Projector Control
The projector can be adjusted or set via the on-screen 
menu. For each adjustment and setting procedure, refer 
to respective sections in the user’s manual (CD-ROM).Use the Point 
ed buttons to highlight or select a main 
menu item. Press the Point 
8 or the SELECT button 
to access the submenu items. (The selected item is 
highlighted in orange.)
Use the Point 
ed buttons to select the desired 
submenu...