Christie Digital Systems L2k1000 Multimedia Projector Quick Reference Guide

- 9 -
English
020-000409-01 Rev.1 (08-2011)
r	FOCUS  button
 Adjusts the f

ocus.
e	
ZOOM button
 Zooms in and out the images.
q	ON/STAND-By but ton
 Turns the projector on or of

f. 
!0	INPUT  button
   Selects an input source Input 1, Input 2, Input 3 or 
Input 4. 
u	
A
 UTO PC ADj. but
ton
 Automatically adjusts the computer image to its 
optimum set

ting. 
y	 POINT  buttons
 -  Select an item or adjust the value in the On-Screen 
MENU

.
 
 -  Pan the image in DIGI

TAL ZOOM + mode.
Side Control and...

- 10 -020-000409-01 Rev.1 (08-2011)
Indicators
qw
e
r
t
y e	
WARNING TEMP. indicator
  This indicator flashes red when internal projector 
temperature is too high. 
q	
POWER indicator
  This indicator lights green when the projector is 
ready to be turned on in standby mode. And it 
flashes green in Power Management mode. 
w	 LAMP Indicator
  This indicator is dim when the projector is turned 
on. And bright when the projector is in stand-by 
mode.
r	 WARNING FILTER indicator
  – 
 Blinks slow when the...

- 11 -
English
020-000409-01 Rev.1 (08-2011)
Remote Control
!6	LIGHT button
 Lights the buttons on the remote control f

or about 10 seconds.
t MENU button
 Opens or closes the On-Screen MENU.
y POINT ed 7 8 buttons
   –
 Select an item or adjust the value in the ON-SCREEN MENU
 .
   –Pan the image in DIGITAL ZOOM +/– mode. 
u	 LENS SHIFT button
 Selects the LENS SHIFT function. 
@0 FOCUS butt ons
 Adjusts the f

ocus. 
i	ZOOM buttons
 Zoom in and out the images.
!0	FREEZE button
 Freez

es the picture...

- 12 -020-000409-01 Rev.1 (08-2011)
Point the remote control toward the projector (to Infrared 
Remote Receivers) when pressing the buttons. Maximum 
operating range for the remote control is about 16.4’ (5 m) 
and 60 degrees in front and rear of the projector.
Infrared Remote Receivers are provided both in front and 
back of the projector. You can conveniently use both of the 
receivers.
Remote Control Receivers and Operating Range
✔Note:
•   When hanging the projector from the ceiling, 
select the...

- 13 -
English
020-000409-01 Rev.1 (08-2011)
Terminals of Projector
The projector has two replaceable Interface board slots. The projector's functions can be extended by installing 
the optional interface boards into the terminal slots. 2 vacant slots (Input 3 and 4) are provided in your 
purchasing the projector.  For the Optional Interface Boards, contact sales dealer where you purchased the 
projector.
Pull out the interface board.Remove 2 Screws from an interface board.
1
2
Tighten screws to...

- 14 -020-000409-01 Rev.1 (08-2011)
Connecting to Computer
VGA 
Cable 
Monitor Output  Desktop type
Laptop type
Terminals of
the projector Monitor Output 
DVI-D Cable 
BNC Cable 
Monitor Output 
Unplug  the  power  cords  of  both  the 
projector  and  external  equipment  from 
the AC outlet before connecting cables.
Cables used for connection 
• DVI-D cable       • Serial cross cable
• DVI/HDMI cable      • USB cable
• VGA Cable (D-sub 15 pin)	*
 ( *One cable is supplied;	Other cables are not supplied...

- 15 -
English
020-000409-01 Rev.1 (08-2011)
Connecting to Video Equipment
Video Source (example)
Professional Digital VCRVideo Disc Player
RGB SCART
21-pin Output
VIDEO/Y, Pb/Cb, Pr/Cr
Component video output equipment.  
(such as DVD player or 
high-definition TV source.)
BNC
Cable 
Digital Output
( HDCP compatible)
DVI-D Cable 
SCART-VGA
Cable
	
U n

p l u g   t h e   p owe r   c o r d s   o f   b o t h   t h e 
projector and external equipment from the 
AC outlet before connecting cables.
S-Video...

- 16 -020-000409-01 Rev.1 (08-2011)
CAUTION ON HANDLING PIN CODE
If you forget your PIN code, the projector 
can no longer be started. Take special care 
in setting a new PIN code; write down the 
number and keep it on hand. Should the 
PIN code be missing or forgotten, consult 
your dealer or service center.
Turning On the Projector
✔Note:
• The Lamp replacement icon and the  Filter replacement or the Filter cartridge 
replacement icon may appear on the 
screen depending on the usage state of 
the...

- 17 -
English
020-000409-01 Rev.1 (08-2011)
✔Note:
• When the Direct On function is set to On, the  projector will be turned on automatically by 
connecting the AC power cord to an AC outlet. 
•
 The running speed of cooling fans is changed 
according to the temperature inside the projector

.
•
 Do not put the projector in a case before the 
projector is cooled enough.
•
 The projector cannot be turned on during the 
cooling period with the POWER indicator turned of

f. 
You can turn it on again after...

- 18 -020-000409-01 Rev.1 (08-2011)
How to Operate the On-Screen Menu
Operating with Projector Control
The projector can be adjusted or set via the on-screen 
menu. For each adjustment and setting procedure, refer 
to respective sections in the user’s manual (CD-ROM).Use the Point 
ed buttons to highlight or select a main 
menu item. Press the Point 
8 or the SELECT button 
to access the submenu items. (The selected item is 
highlighted in orange.)
Use the Point 
ed buttons to select the desired 
submenu...