Christie Digital Systems L2k1000 Multimedia Projector Quick Reference Guide

L2K1000
SETUP GUIDE
020-000409-01 

Use  this  book  as  a  reference  guide  when  setting  up  the  projector. 
For  detailed  information  about  installation,  setup,  and  operation  of 
the projector, refer to the user’s manual on the CD-ROM.
ReaD the  Sa Fety  In StRUC tIO nS In  th IS  QUICK  R eFe R en Ce 
GUIDe beFORe USInG the pROjeCt OR.
English
Deutsch
Français
Italiano
Español
Português
✽ Lens not included.
Multimedia  Projector 
Quick Reference Guide 

- 2 -020-000409-01 Rev.1 (08-2011)
CAUTION: T O   R E D U C E   T H E   R I S K   O F   E L E C T R I C 
S H O C K ,  D O  N OT  R E M OV E  C OV E R  ( O R 
B AC K ) .  N O  U S E R - S E RV I C E A B L E  PA RT S 
INSIDE  EXCEPT  LAMP  REPLACEMENT.  
REFER  SERVICING TO  QUALIFIED  SERVICE 
PERSONNEL.
T H I S  SY M B O L  I N D I C AT E S  T H AT  DA N G E R O U S 
VO LTAG E  C O N ST IT UT I N G  A  R I S K  O F  E L E C T R I C 
SHOCK IS PRESENT WITHIN THIS UNIT.
T H I S   S Y M B O L   I N D I C AT...

- 3 -
English
020-000409-01 Rev.1 (08-2011)
All the safety and operating instructions should be read before 
the product is operated.
Read all of the instructions given here and retain them for 
later use. Unplug this projector from AC power supply before 
cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth 
for cleaning.
Follow all warnings and instructions marked on the projector.
For added protection to the projector during a lightning storm, or 
when it is left unattended and unused for...

- 4 -020-000409-01 Rev.1 (08-2011)
Openings in the cabinet are provided for ventilation. 
To ensure reliable operation of the product and to 
protect it from overheating, these openings must not 
be blocked or covered. 
Air CirculationMoving the Projector
Remote Control Battery Installation
Hot air is exhausted from the exhaust vent. When 
using or installing the projector, the following 
precautions should be taken. 
–  Do not put any flammable object or spray can near 
the projector, hot air is...

- 5 -
English
020-000409-01 Rev.1 (08-2011)
Installing the Projector in Proper Directions
Avoid positioning the projector as described below when installing.
Do not roll the projector more 
than 10 degrees from side to side. 
10˚10˚
In downward projection, do 
not tilt the projector over 10 
degrees right and left.
For ceiling mounting, you need the ceiling mount kit designed for this projector. When not 
mounted properly, the projector may fall, causing hazards or injury. For details, consult your...

- 6 -020-000409-01 Rev.1 (08-2011)
The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.  
AC Power Cord for the United States and Canada:
AC Power Cord used in the United States and Canada is listed by the Under writers Laboratories (UL) 
and certified by the Canadian Standard Association (CSA).
AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the plug 
will fit into the power outlet. Do not try to defeat...

- 7 -
English
020-000409-01 Rev.1 (08-2011)
 
u
e r t
Front
q
w
yit
q	 Lens Mount Cover
w	 Projection Lens (Optional)
e  Indicators
r	 Infrared Remote Receiver (Front) 
t  Adjustable Feet
y	
Terminals and Connectors
u  Handle 
i  Side Control 
o  Lamp Cover
o
Back
A Kensington* Security Slot
T
his slot is for a Kensington lock used to 
deter theft of the projector.
* Kensington is a registered trademark of ACCO Brands 
Corporation.
 CAUTION
Hot air is exhausted from the exhaust 
vent. Do not put...

- 8 -020-000409-01 Rev.1 (08-2011)
Terminals and Connectors
r	R/C j ACK
  When using the wired remote control, connect the 
wired remote control to this jack with a remote 
control cable (not supplied).
e	USB CONNECTOR (series B)
  USB connector is to used to service the projector.
y	S-VIDEO j ACK
  Connects the S-VIDEO output signal from video 
equipment to this jack .
q	
SERIAL PORT IN TERMINAL
  If you control the projector from a computer, you 
must connect a cable (not supplied) from your 
computer...