Casio Ravine 3 Manual

							40
Entering and Editing Information
3. When entered text is correct, press the Center Select Key [OK]. If 
incorrect, you can use the following procedure to correct it.
Press the Directional Key   left or right to select the incorrect 
word and press the Right Soft Key [List] to display the Choice 
List. Select the correct word, then press the Center Select Key 
[OK].  
If the correct word is not found in the Choice List, select 
[Spell Word] from the Choice List to type characters with 
the Alphanumeric Keypad. In the middle of spelling a word, 
candidate words are presented for you to select by scrolling with 
the Directional Key  up or down.
NOTES
Before using Voice Dictation mode for the first time, you must 
complete the voice training following the instructions on the 
screen.
Voice Dictation mode cannot be used when the handset is 
connected to an audio device with Bluetooth
®.
Voice Dictation mode supports only US English. 
When you press the Left Soft Key, then select Voice, the message 
“Press and Hold Voice Commands Key while speaking” appears 
on the display. •
•
•
•• 
						

							41
RECENT CALLS
The Recent Calls menu is a list of the last phone numbers or Contact 
entries for calls (including PT T calls) you placed, accepted, missed, 
or blocked. It is continually updated as new numbers are added to 
the beginning of the list and the oldest entries are removed from the 
bottom of the list.
Accessing the Recent Calls submenu
1.  From idle mode, press the Center Select Key [MENU], select 
Recent Calls, then press the Center Select Key [OK]. 
2. Select a submenu. 
Missed: Displays a list of the 90 most recently missed calls.
Received: Displays a list of the 90 most recently received calls.
Dialed: Displays a list of the 90 most recently dialed calls.
Blocked*: Displays a list of the 90 most recently blocked calls.
All**: Displays a list of the 270 most recent calls.
View Timers: Displays the duration of selected calls.
If you select Blocked, enter the four-digit Lock Code. The default 
Lock Code is the last 4 digits of your phone number. 
*  Blocked appears only when Contacts Only or Block All is 
selected for Calls under MENU > Settings & Tools > Phone 
Settings > Security > Restrictions > Calls > Incoming Calls. For 
information about how to configure this setting, see page 157. 
** Blocked calls are not displayed in the All Calls list. 
NOTE
Pressing the Send Key from idle mode takes you to the All Calls list. •
RECENT CALLS 
						

							42
RECENT CALLS
Making a Call from Recent Calls
1.  From idle mode, press the Center Select Key [MENU], select 
Recent Calls, then press the Center Select Key [OK]. 
2. Select one of the following call lists, then press the Center Select 
Key [OK].  
Missed /Received /Dialed /Blocked /All
3. Scroll to an entry, then press the Send Key to make a call. 
Viewing Recent Call History
1.  From idle mode, press the Center Select Key [MENU], select 
Recent Calls, then press the Center Select Key [OK]. 
2. Select one of the following call lists, then press the Center Select 
Key [OK].  
Missed /Received /Dialed /Blocked /All 
3. Scroll to a call entry, then:
Press the Center Select Key [OPEN] to view the entry.
If you selected a non-PTT call, press the Right Soft Key 
[Options] to select:
Save to Contacts: Stores the phone number in your Contacts. 
(This option is not displayed for a phone number already 
registered in the Contacts.)
Save to PTT Contacts: Stores the phone number in your PT T 
Contacts. (This option is not displayed when PT T Mode is Off, or 
for a phone number already registered in the PT T Contacts.)
Details: Displays the entry content. (This option is not available 
for a phone number not registered in the Contacts)
Erase: Erases the entry from the call list. 
Lock /Unlock: Locks or unlocks the entry in the call list. 
Erase All: Erases all the entries in the selected call list. 
View Timers: Displays the duration of the call.  •
• 
						

							43
RECENT CALLS
Press the Left Soft Key [Message] to select:  
New TXT Message / New Picture Message / New Video 
Message /New Voice Message
If you selected a PTT call, press the Left Soft Key [Alert] to place 
an alert PT T call. (The Left Soft Key [Alert] is not available when 
PT T Mode is Off.) 
If you selected a PTT call, press the Right Soft Key [Options] to 
select:  
New TXT Message / New Picture Message / New Video 
Message / New Voice Message / Save To Contacts / Save To 
PTT Contacts /Erase /Lock (Unlock) /Erase All /View Timers
If you selected a PTT Group or Temp PTT Group from the Dialed 
Calls list, press the Right Soft Key [Options] to select: 
Erase / Lock (Unlock) / Erase All /View Timers
View Timers
To view the duration of selected calls:
1.  From idle mode, press the Center Select Key [MENU], select 
Recent Calls, then press the Center Select Key [OK]. 
2. Select View Timers, then press the Center Select Key [OK].
3. Scroll to a call list. Call timers include:  
Last Call /All Calls / Received Calls / Dialed Calls / Roaming 
Calls / Transmit Data / Received Data / Total Data / Last Reset /
Lifetime Calls / Lifetime Data Counter
Press the Left Soft Key [Reset] to reset the highlighted timer.
Press the Right Soft Key [Reset All] to reset all timers.  •
•
•
•
•
• 
						

							44
CONTACTS
CONTACTS
The Contacts menu allows you to store names, phone numbers and 
other information in your handset’s memory. You may store up to 
1,000 entries.
Adding a new Contact from idle mode
1.  From idle mode, enter the phone number (up to 48 characters) you 
want to register. 
2. Press the Left Soft Key [Save]. 
NOTES
When PT T Mode is On, press the Right Soft Key [Options] in step 
2, then  Save To Contacts. 
Pressing the Right Soft Key [Options] allows you to access the 
following options: 
Add 2-Sec Pause : Inserts a 2-sec Pause into the number.
Add Wait : Inserts a Wait pause into the number.
Add From Contact : Adds a phone number which is stored in the 
Contact List. 
Add From Recent Call: Adds a phone number which is stored in 
Recent Calls. 
Save To Contacts: Stores the phone number in your Contacts. 
(This option is not displayed when PT T Mode is Off.)
Save To PTT Contacts: Stores the phone number in your PT T 
Contacts. (This option is not displayed when PT T Mode is Off.)
New TXT Message : Sends a text message to the entered phone 
number.
New Picture Message : Sends a picture message to the entered 
phone number.
New Video Message : Sends a video message to the entered 
phone number.  •
•
CONTACTS 
						

							45
CONTACTS
New Voice Message : Sends a voice message to the entered 
phone number. 
Assisted Dialing: Sets the Assisted Dialing setting. For more 
detail, see page 164. 
3. Press  Add New Contact.
4. Select the type of phone number you want to save, then press the 
Center Select Key [OK].  
Mobile 1/ Mobile 2 /Home /Business
5. Scroll to the information field you want to enter. These fields 
include:  
Name / Mobile 1/ Home /Business / Mobile 2 /Personal Email /
Business Email / IM Screen Name / Picture / Ringtone /Group /
Home Address /Work Address /Company/Title /Birthday/ Notes
To add the name, scroll to the Name field, then enter a name for 
the contact (up to 32 characters).
To add the phone number, scroll to the Mobile 1, Home, 
Business, or Mobile 2 field, then enter the phone number (up to 
48 characters). 
To add an e-mail address, scroll to the Personal Email or 
Business Email field, then enter an e-mail address (up to 48 
characters). 
To add the IM Screen Name, scroll to the IM Screen Name field, 
then press the Left Soft Key [Set]. Select a service provider, then 
press the Center Select Key [OK]. Enter the IM Screen Name (up 
to 48 characters), then press the Center Select Key [OK]. 
To assign the Picture ID, scroll to the Picture field, then press the 
Left Soft Key [Set]. Select a picture, then press the Center Select 
Key [OK]. 
To assign the call ringtone, scroll to the Ringtone field, then 
press the Left Soft Key [Set]. Select a ringtone, then press the 
Center Select Key [OK].  •
•
•
•
•
• 
						

							46
CONTACTS
To add the Contact entry into a group, scroll to the Group field, 
then press the Left Soft Key [Set]. Select the Group, press the 
Center Select Key [MARK], then press the Left Soft Key [Done]. 
To add the Home Address, scroll to the Home Address field, 
then press the Left Soft Key [Set]. Enter the Street, City, State, 
Zip Code, and Country, then press the Center Select Key [OK]. 
(Up to 11 characters for Zip Code and up to 32 for others)
To add the Work Address, scroll to the Work Address field, then 
press the Left Soft Key [Set]. Enter the Street, City, State, Zip 
Code, and Country, then press the Center Select Key [OK].
To add the company name, scroll to the Company field, then 
enter the company name (up to 32 characters).
To add a title, scroll to the Title field, then enter the title (up to 32 
characters).
To add the birthday, scroll to the Birthday field, then press the 
Left Soft Key [Set]. Enter the birthday, then press the Center 
Select Key [OK].  
To remove the added birthday, press the Right Soft Key 
[Remove] with the Birthday field selected. Select Ye s and press 
the Center Select Key [OK].
To add notes, scroll to the Notes field, then enter the notes (up to 
30 characters).
6. Select the entered phone number field and press the Right Soft 
Key [Options] to select one of the following options:  
Set Speed Dial / Set As Default /Add 2-Sec Pause /Add Wait 
To add the Contact entry to the Speed Dial list, press  Set 
Speed Dial. Select the desired Speed Dial digit by using the 
keypad or by scrolling to highlight it, then press the Center Select 
Key [SET]. Select Ye s and press the Center Select Key [OK].
To set the phone number as the Default Number, press  
Set As Default, then select Ye s and press the Center Select Key 
[OK]. •
•
•
•
•
•
•
•
• 
						

							47
CONTACTS
To add a pause to an existing number, press  Add 2-Sec 
Pause or  Add Wait. 
NOTE
The initial phone number entered when the new Contact is created 
becomes the Default Number. If more than one number is entered 
for the Contact entry, another number can be selected as the 
Default Number. 
7.  After entering the information as necessary, press the Center 
Select Key [SAVE] to save the contact entry. 
8. CONTACT SAVED appears on the display. The phone number 
reappears on screen. Press the End/Power Key to exit, or press the 
Send Key to make a call to the displayed phone number. 
Adding a Phone Number to an Existing 
Contact
1.  From idle mode, enter the phone number (up to 48 characters) you 
want to register.
2. Press the Left Soft Key [Save], then press  Update Existing. 
3. Scroll to the existing Contact entry you want to update, then press 
the Center Select Key [OK]. 
4. Select the phone number type, then press the Center Select Key 
[OK].  
Mobile 1/ Mobile 2 /Home /Business
  If a phone number is already assigned to the field you selected, 
Entry is already assigned. Overwrite? appears on the display. 
Select Ye s to overwrite, then press the Center Select Key [OK]. 
5. CONTACT UPDATED appears on the display. The phone number 
reappears on screen. Press the End/Power Key to exit, or press the 
Send Key to make a call to the displayed phone number. • 
						

							48
CONTACTS
Phone Numbers with Pauses
Pauses are used for automated systems (e.g. voicemail or calling 
cards). Insert a pause after a set of numbers then enter another set. 
The second set of numbers is dialed after the pause. This feature 
is useful for dialing into systems that require a code. There are two 
different types of pauses you can use when registering a phone 
number:
Wait (W): The handset stops dialing until you press the Left Soft 
Key [Release] to advance to the next number.
2-Sec Pause (P) : The handset waits 2 seconds before 
automatically dialing the next set of numbers.
Registering a Phone Number with Pauses
1.  From idle mode, enter the phone number.
2. Press the Right Soft Key [Options], then press  Add 2-Sec 
Pause or  Add Wait. 
3. Enter the additional number(s) (e.g. PIN number or credit card 
number). 
4. Press the Left Soft Key [Save], then press  Add New 
Contact.
5. Complete any additional fields and press the Center Select Key 
[SAVE]. 
Accessing the Contacts submenu
1.  From idle mode, press the Center Select Key [MENU], select 
Contacts, then press the Center Select Key [OK]. 
2. Select a submenu:  
New Contact / Contact List / Groups / New PTT Contact*/PTT 
Contact List*/ PTT Groups*/Backup Assistant /Speed Dials / In 
Case of Emergency/ My Name Card
  * These options are available only when the PT T feature is turned 
on. •
• 
						

							49
CONTACTS
NOTE
From idle mode, pressing the Right Soft Key [Contacts] functions 
as a hot key to access the Contact List. 
New Contact
To add a new number to your Contact List: 
1.  From idle mode, press the Center Select Key [MENU], select 
Contacts, then press the Center Select Key [OK]. Press  
New Contact. 
2. Complete all the desired fields and press the Center Select Key 
[SAVE] to create the contact entry. 
NOTE
Using this submenu, the number is saved as a new Contact. To 
save the number into an existing Contact, edit the Contact entry. 
Contact List
To view your Contact List: 
NOTES
From idle mode, pressing the Right Soft Key [Contacts] functions 
as a hot key to access the Contact List.
Your handset is able to perform a dynamic search of the contents 
in your handset’s memory. A dynamic search compares entered 
letters or numbers against the entries in your Contact List, and 
displays matches in alphabetical order. You can then select a 
number from the list to call or edit. You may locate a contact by: 
Searching by Letter 
Scrolling Alphabetically  •
•
-
-