Casio Ravine 3 Manual

							160
SETTINGS & TOOLS
NOTE
When PT T mode is On, you cannot change this setting.
NAM Selection
To select the handset’s NAM (Number Assignment Module) if the 
handset is registered with multiple service providers: 
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK]. Press 
 Phone Settings,  NAM Selection.
2. Select NAM 1 or NAM 2, then press the Center Select Key [SET]. 
NOTES
When PT T mode is On, you cannot change this setting. 
When you change this setting, the handset will restart.  •
•
Motion Detection
To turn the Motion Detection feature On or Off: 
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK]. Press 
 Phone Settings.
2. Select Motion Detection, then press the Center Select Key [OK]. 
3. Select one of the following settings, then press the Center Select 
Key [OK].  
G’zGEAR / My Pics / Videos 
4. Select On or Off, then press the Center Select Key [OK].
Call Settings
The Call Setup menu allows you to designate how the handset 
handles both incoming and outgoing calls. 
						

							161
SETTINGS & TOOLS
Accessing the Call Settings submenu
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK].
2. Select Call Settings, then press the Center Select Key [OK]. 
3. Select a submenu: 
Answer Options /Auto Retry / TTY Mode / One Touch Dial / Voice 
Privacy / PC Connections / DTMF Tones / PTT Mode /Assisted 
Dialing
Answer Options
To set how to answer an incoming call: 
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK]. 
2. Select Call Settings, then press the Center Select Key [OK],  
Answer Options.
3. Select Flip Open, Any Key, or Auto w / Handsfree, press the 
Center Select Key [MARK], then the Left Soft Key [Done]. 
“ANSWER OPTIONS SET” will appear on the display.
NOTES
The Auto w/Handsfree Mode will function after about five seconds. 
When the handset is closed, the Auto w/Handsfree Mode will not 
function, except when connected to a headset.  
When the handset is open, the Auto w/Handsfree Mode will only 
function when the Speakerphone is on. 
Flip Open and Any Key are the default settings.  •
•
•
Auto Retry
To set the length of time the handset waits before automatically 
redialing a number when the attempted call fails: 
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK].  
						

							162
SETTINGS & TOOLS
2. Select Call Settings, then press the Center Select Key [OK],  
Auto Retry.
3. Select the following settings, then press the Center Select Key 
[SET].  
10 seconds / 30 seconds / 60 seconds / Off
TTY Mode
You can connect a T T Y device to your handset, enabling you to 
communicate with other parties using a T T Y device. 
A phone with T T Y support is able to translate typed characters to 
voice. Voice can also be translated into characters and then displayed 
on the T T Y. 
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK]. 
2. Select Call Settings, then press the Center Select Key [OK],  
TTY Mode.
3. A warning message “Enabling T T Y will disable headset audio.” 
appears on the display. Press the Center Select Key [OK].
4. Select one of the following settings, then press the Center Select 
Key [SET]. 
TTY Full/TTY+Talk/TTY+Hear/TTY Off
One Touch Dial
To initiate a speed dial call by holding down the speed dial digit: 
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK]. 
2. Select Call Settings, then press the Center Select Key [OK],  
One Touch Dial.
3. Select On or Off, then press the Center Select Key [SET].  
						

							163
SETTINGS & TOOLS
NOTE
If One Touch Dial is disabled, Speed Dial numbers designated in 
your Contacts will not function. 
Voice Privacy
To turn the voice privacy feature On or Off: 
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK]. 
2. Select Call Settings, then press the Center Select Key [OK],  
Voice Privacy.
3. Select On or Off, then press the Center Select Key [SET].
PC Connections
Allows you to use wireless data communication services, which 
use subscriber terminals for access to the internet with personal 
computers or laptops. The connection speed depends on your 
carrier’s network and other variables. Contact communication 
information specifications must match the network. 
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK]. 
2. Select Call Settings, then press the Center Select Key [OK], 	 
PC Connections.
3. Select one of the following settings, then press the Center Select 
Key [SET]. 
USB/ Bluetooth /Close
NOTE
When the headset is communicating with a PC using Bluetooth®, 
you will not be able to answer or make a PT T call.  
						

							164
SETTINGS & TOOLS
DTMF Tones
To set the Key Tone length and touch tone playback speed: 
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK]. 
2. Select Call Settings, then press the Center Select Key [OK], 
 
DTMF Tones.
3. Select one of the following settings, then press the Center Select 
Key [SET]. 
Normal: Sends out a tone for a fixed period of time even if you 
continue to press the key. 
Long: Sends out a continuous tone for the duration the key is 
pressed and held. 
PTT Mode
You can use the following procedure to turn the PT T feature On or Off. 
When PT T is turned on, you will be able to send and receive PT T calls 
or alerts. 
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK]. 
2. Select Call Settings, then press the Center Select Key [OK],  
PTT Mode.
3. Select On or Off, then press the Center Select Key [OK]. 
NOTE
The 3G or 1x service indicator icon on the top line of the main 
display is highlighted to indicate that the PT T service is available 
when turned On. 
Assisted Dialing
Assisted Dialing allows easy dialing of international calls while 
roaming in another country. First, set Reference Country to your home 
location. 
						

							165
SETTINGS & TOOLS
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK]. 
2. Select Call Settings, press the Center Select Key [OK], then press 
 Assisted Dialing.
3. Press the Directional Key   left or right to select On or Off.
4. Select the Reference Country field, then press Left Soft Key [Set] 
to select country.
5. Select the desired country, then press the Center Select Key 
[OK]. If you want to edit details, press Left Soft Key [Details] to 
edit and save the Country Code, International Dialing Digits (IDD) 
Prefix, the National Dialing Digits (NDD) Prefix, Area/City Code, 
or the National Number Length, then press the Center Select Key 
[SAVE].
6. Press the Center Select Key [OK]. Press the Center Select Key 
[OK] again. 
Memory
You can view details about the information stored in your handset’s 
internal memory and on a memory card inserted in the handset. 
Accessing the Memory submenu
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK]. 
2. Select Memory, then press the Center Select Key [OK].
3. Select a submenu:  
Save Options / Phone Memory / Card Memory
Save Options
To select whether to save to Phone Memory or to Card Memory when 
saving a file: 
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK]. 
						

							166
SETTINGS & TOOLS
2. Select Memory, then press the Center Select Key [OK],  
Save Options.
3. Select one of the following settings, then press the Center Select 
Key [OK].  
Pictures /Videos /Sounds
4. Select Phone Memory or Card Memory, then press the Center 
Select Key [SET]. 
Phone Memory and Card Memory
Select this option to display Phone or Card Memory information, and 
to delete or move files saved in Phone or Card Memory. 
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK]. 
2. Select Memory, then press the Center Select Key [OK],  
Phone Memory or  Card Memory
3. Select one of the following settings, then press the Center Select 
Key [OK]. 
Memory Usage / My Pictures / My Videos / My Ringtones / My 
Music / My Sounds / My Contacts / Move All to Card ( Move All to 
Phone)
4. Press the Right Soft Key [Options].  
(Excluding Memory Usage, Move All to Card, and Move All to 
Phone)
5. Select Erase if you want to delete a file or Move if you want to 
move a file to Card or Phone Memory, then press the Center Select 
Key [OK]. 
6. Select a file or a contact, press the Center Select Key [MARK] or 
the Right Soft Key [Mark All], then press the Left Soft Key [Done]. 
7. Select Ye s, then press the Center Select Key [OK]. 
						

							167
SETTINGS & TOOLS
NOTES
Selecting Memory Usage in step 2 displays the available 
memory capacity, used capacity, and total capacity. 
Selecting Move All To Card in step 2 moves all the files stored in 
Phone Memory to Card Memory. 
Selecting Move All To Phone in step 2 moves all the files stored 
in Card Memory to Phone Memory. 
Do not remove the memory card from the handset while files are 
being transferred. 
To view Card Memory, a memory card (sold separately) must be 
inserted in your handset.  •
•
•
•
•
USB Mode
Your handset has the ability to automatically detect connection of the 
USB cable (included in box) from the handset to your PC. 
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK]. 
2. Select USB Mode, then press the Center Select Key [OK].
3. Select one of the following settings, then press the Center Select 
Key [SET]. 
Media Sync Mode /Modem Mode /Ask On Plug
NOTES
Before connecting the handset to your PC with the USB cable, 
check that your handset is not locked. 
While the USB cable is connected to your handset, if you select 
Media Sync Mode or Modem Mode, all calls and Bluetooth
® 
functions will be temporarily disabled. Unplug the USB cable from 
your handset to be able to make or receive calls, and to enable 
Bluetooth
® function.  •
• 
						

							168
SETTINGS & TOOLS
Phone Info
Accessing the Phone Info submenu
To display information about your handset: 
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK].
2. Select Phone Info, then press the Center Select Key [OK].
3. Select a submenu and press the Center Select Key [OK]. 
My Number/SW/ HW Version / Icon Glossary/Software Update
My Number
To view your handset’s Mobile Device Number (MDN) and Mobile 
Identifications Number (MIN): 
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK].
2. Select Phone Info, then press the Center Select Key [OK],  
My Number. 
SW/ HW Version
To view the Software, PRL, ERI, Browser, Media Center, MSUI and 
HW versions, and MEID, Software Update Client, BT Mac Address, 
Warranty Date Code:
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK].
2. Select Phone Info, then press the Center Select Key [OK],  
SW/ HW Version.
Icon Glossary
To view all the icons and their meanings: 
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK].
2. Select Phone Info, then press the Center Select Key [OK],  
Icon Glossary. 
						

							169
SETTINGS & TOOLS
NOTE
For more information on the icons, see page 13. 
Software Update
Status
To check the status of a Software Update: 
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK].
2. Select Phone Info, then press the Center Select Key [OK],  
Software Update,  Status.
Check new
To check for and execute a Software Update: 
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK].
2. Select Phone Info, then press the Center Select Key [OK],  
Software Update,  Check New.
3. If there is a new Software Update, it will be downloaded. 
4. After download is complete, press the Center Select Key [OK] or 
wait for three minutes to execute the Software Update.
Warning !
You cannot make phone calls, including 911 emergency calls, nor 
can you answer calls while a Software Update is in progress. 
I
I