Casio Ravine 3 Manual

							170
SETTINGS & TOOLS
NOTES
After the software download is complete, you can press the Left 
Soft Key [Info] to check the content of the downloaded Software 
Update. 
After the software download is complete, you can press the Right 
Soft Key [Options] and then  Defer to set a time when 
Software Update should start. 
After the software download is complete, you can press the Right 
Soft Key [Options], then  Reject to reject the Software 
Update.  •
•
•
Install Deferred SW
When there is a Software Update that has been deferred, the “Check 
New” item changes to “Install Deferred SW.” Selecting this option 
installs the deferred Software Update. 
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK].
2. Select Phone Info, then press the Center Select Key [OK],  
Software Update,  Install Deferred SW.
3. Select Ye s, then press the Center Select Key [OK]. 
Set-up Wizard
You can set the Call Sounds, Display Theme, Menu Layout, Main 
Clock Format, and Front Clock Format all at once using the Wizard. 
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK]. 
2. Select Set-up Wizard, then press the Center Select Key [OK].
3. Follow the on-screen prompts for the settings below. 
CALL SOUNDS : Select Ring Only, Vibrate Only, Ring and 
Vibrate or Be Silent then press the Center Select Key [SET] to 
save the setting or press the Right Soft Key [Skip] to go to the 
next setting.
I
• 
						

							171
SETTINGS & TOOLS
DISPLAY THEMES: Select White, Wireframe, Tr e k, or Clash, 
then press the Center Select Key [SET] to save the setting or 
press the Right Soft Key [Skip] to go to the next setting.
MENU LAYOUT: Select Ta b, List, or Grid, then press the Center 
Select Key [SET] to save the setting or press the Right Soft Key 
[Skip] to go to the next setting.
MAIN CLOCK FORMAT: Select Analog, Large Analog, Digital 
12, Large Digital 12, Digital 24, Large Digital 24 or Off, then 
press the Center Select Key [SET] to save the setting or press 
the Right Soft Key [Skip] to go to the next setting.
FRONT CLOCK FORMAT: Select Digital, Analog or Off, then 
press the Center Select Key [SET] to save the setting or press 
the Right Soft Key [Done] to complete set-up.
Tutorial
You can display the tutorial for Push to Talk (PT T), G’zGEAR®, Voice 
Dictation, or Message Readout. 
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK]. 
2. Select Tutorial, then press the Center Select Key [OK].
3. Select one of the following tutorials, then press the Center Select 
Key [OK].
Push to Talk (PTT) / G’zGEAR / Voice Dictation / Message 
Readout  •
•
•
• 
						

							172
Safety
TIA Safety Information
The following is the complete TIA Safety Information for wireless 
handheld phones.
Tips on Efficient Operation
Do not touch the antenna unnecessarily when the phone is in use. 
Contact with the antenna affects call quality and may cause the 
phone to consume more power than otherwise needed.
Driving
Talking on the phone while driving is extremely dangerous and is 
illegal in some states. Remember, safety comes first. Check the laws 
and regulations on the use of phones in the areas where you drive. 
Always obey them.
If you must use your phone while driving, please:
Give full attention to driving. Driving safely is your first responsibility.
Use hands-free operation and/or one-touch, speed dialing, and auto 
answer modes.
Pull off the road and park before making or answering a call.
An air bag inflates with great force. DO NOT place objects, including 
either installed or portable wireless equipment, in the area over the air 
bag or in the air bag deployment area. 
If in-vehicle wireless equipment is improperly installed and the air bag 
inflates, serious injury could result. 
Warning !
Failure to follow these instructions could lead to serious personal 
injury and possible property damage. 
I
I
•
•
•
Safety 
						

							173
Safety
Electronic Devices
Your wireless handheld portable telephone is a low power radio 
transmitter and receiver. When it is ON, it receives and also sends out 
radio frequency (RF) signals. 
Most modern electronic equipment is shielded from RF energy. 
However, certain electronic equipment may not be shielded against 
the RF signals from your wireless phone. Therefore, use of your phone 
must be restricted in certain situations.
Pacemakers
The Health Industry Manufacturers Association recommends that 
a minimum separation of six (6) inches be maintained between 
a handheld wireless phone and a pacemaker to avoid potential 
interference with the pacemaker. These recommendations are 
consistent with the independent research by and recommendations of 
Wireless Technology Research.
Never come closer than six (6) inches to a person with a heart 
pacemaker implant when using your phone. Doing so could result in 
interference with the function of the pacemaker.
Persons with pacemakers:
ALWAYS keep the phone more than six (6) inches from your 
pacemaker when the phone is turned on.
Do not carry the phone in a breast pocket.
Use the ear opposite the pacemaker to minimize the potential for 
interference.
If you have any reason to suspect that interference is taking place, 
turn your phone OFF immediately.
Hearing Aids
Some digital wireless phones may interfere with some hearing aids. In 
the event of such interference, you may want to consult your service 
provider (or call the customer service line to discuss alternatives).
I
•
•
•
• 
						

							174
Safety
Other Medical Devices
If you use any other personal medical device, consult the 
manufacturer of your device to determine if they are adequately 
shielded from external RF energy. Your physician may be able to 
assist you in obtaining this information.
Hospitals and Health Care Facilities
Turn your phone OFF in health care facilities when any regulations 
posted in these areas instruct you to do so. Hospitals or health care 
facilities may be using equipment that could be sensitive to external 
RF energy.
Vehicles
RF signals may affect improperly installed or inadequately shielded 
electronic systems in motor vehicles. Check with the manufacturer or 
its representative regarding your vehicle. You should also consult the 
manufacturer of any equipment that has been added to your vehicle.
Posted Facilities
Turn your phone OFF where posted notices so require.
Aircraft
FCC regulations prohibit using your phone while in the air. Turn your 
phone OFF before boarding an aircraft. 
Always request and obtain prior consent and approval of an 
authorized airline representative before using your phone aboard an 
aircraft. Always follow the instructions of the airline representative 
whenever using your phone aboard an aircraft, to prevent any 
possible interference with airborne electronic equipment.
I
I
I 
						

							175
Safety
Blasting Areas 
To avoid interfering with blasting operations, turn your phone OFF 
when in a “blasting area” or in areas posted “Turn off two-way radio”. 
Obey all signs and instructions.
Potentially Explosive Atmospheres
Turn your phone OFF when in any area with a potentially explosive 
atmosphere and obey all signs and instructions. Sparks in such areas 
could cause an explosion or fire resulting in bodily injury or even 
death. 
Areas with a potentially explosive atmosphere are often, but not 
always, clearly marked. They include fueling areas such as gas 
stations; below deck on boats; fuel or chemical transfer or storage 
facilities; vehicles using liquefied petroleum gas (such as propane or 
butane); areas where the air contains chemicals or articles, such as 
grain, dust, or metal powders; and any other area where you would 
normally be advised to turn off your vehicle’s engine.
Safety Information for FCC RF Exposure
Warning !
Read this information before using.
In August 1996 the Federal Communications Commission (FCC) 
of the United States with its action in Report and Order FCC 96 -
326 adopted an updated safety standard for human exposure to 
radio frequency electromagnetic energy emitted by FCC regulated 
transmitters. Those guidelines are consistent with the safety standard 
previously set by both U.S. and international standards bodies. The 
design of this phone complies with the FCC guidelines and these 
international standards.
I
I 
						

							176
Safety
Body-Worn Operation
This device was tested for typical body-worn operations with the back 
of the phone kept 2.0 cm from the body. To maintain compliance with 
FCC RF exposure requirements, use only belt-clips, holsters or similar 
accessories that maintain a 2.0 cm separation distance between the 
user’s body and the back of the phone, including the antenna. The 
use of belt-clips, holsters and similar accessories should not contain 
metallic components in its assembly. The use of accessories that do 
not satisfy these requirements may not comply with FCC RF exposure 
requirements, and should be avoided.
SAR information
THIS MODEL PHONE MEETS THE GOVERNMENT’S 
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. 
Your wireless phone is a radio transmitter and receiver. It is 
designed and manufactured not to exceed the emission limits 
for exposure to radiofrequency (RF) energy set by the Federal 
Communications Commission of the U.S. Government. These limits 
are part of comprehensive guidelines and establish permitted 
levels of RF energy for the general population. The guidelines are 
based on standards that were developed by independent scientific 
organizations through periodic and thorough evaluation of scientific 
studies. The standards include a substantial safety margin designed 
to assure the safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a unit of 
measurement known as the Specific Absorption Rate, or SAR. The 
SAR limit set by the FCC is 1.6 W/kg.* Tests for SAR are conducted 
with the phone transmitting at its highest certified power level in 
all tested frequency bands. Although the SAR is determined at the 
highest certified power level, the actual SAR level of the phone while 
operating can be well below the maximum value. This is because 
the phone is designed to operate at multiple power levels so as to 
I
I 
						

							177
Safety
use only the power required to reach the network. In general, the 
closer you are to a wireless base station antenna, the lower the power 
output. Before a phone model is available for sale to the public, it 
must be tested and certified to the FCC that it does not exceed the 
limit established by the government adopted requirement for safe 
exposure. The tests are performed in positions and locations (e.g., at 
the ear and worn on the body) as required by the FCC for each model.
The highest SAR value for this model phone when tested for use at 
the ear is 0.53W/Kg and when worn on the body, as described in 
this guide, is 0.81W/Kg. (Body-worn measurements differ among 
phone models, depending upon available accessories and FCC 
requirements). While there may be differences between the SAR 
levels of various phones and at various positions, they all meet the 
government requirement for safe exposure.
The FCC has granted an Equipment Authorization for this model 
phone with all reported SAR levels evaluated as in compliance with 
the FCC RF exposure guidelines. SAR information on this model 
phone is on file with the FCC and can be found under the Display 
Grant section of 
http://www.fcc.gov/oet/ea/fccid after searching on T YKNX9300.
Additional information on Specific Absorption Rates (SAR) can be 
found on the Cellular Telecommunications & Internet Association 
(CTIA) web-site at http://www.ctia.org.
*  In the United States and Canada, the SAR limit for mobile phones 
used by the public is 1.6 watts/kg (W/kg) averaged over one gram 
of tissue. The standard incorporates a substantial margin of safety 
to give additional protection for the public and to account for any 
variations in measurements. 
This equipment has been tested and found to comply with the limits 
for a class B digital device, pursuant to Part 15 of the FCC Rules. 
These limits are designed to provide reasonable protection against  
						

							178
Safety
harmful interference in a residential installation. This equipment 
generates, uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause 
harmful interference to radio communications.
However, there is no guarantee that interference will not occur 
in a particular installation. if this equipment does cause harmful 
interference to television reception, which can be determined by 
turning the equipment off and on, the user is encouraged to try to 
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that 
to which the receiver is connected
Consult the dealer or an experienced radio/ T V technician for help.
FCC Compliance Information
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received.
Including interference that may cause undesired operation.
CAUTION
The user who makes changes or modifications to the unit without 
the express approval by the manufacturer will void user authority to 
operate the equipment.
FDA Information
U.S. Food and Drug Administration 
Cell Phone Facts 
Consumer Information on Wireless Phones •
•
•
•
I 
						

							179
Safety
What kinds of phones are the subject of this 
update?
The term “wireless phone” refers here to hand-held wireless phones 
with built-in antennas, often called “cell,”“mobile,” or “PCS” phones. 
These types of wireless phones can expose the user to measurable 
radiofrequency energy (RF) because of the short distance between 
the phone and the user’s head. These RF exposures are limited by 
Federal Communications Commission safety guidelines that were 
developed with the advice of FDA and other federal health and safety 
agencies. When the phone is located at greater distances from the 
user, the exposure to RF is drastically lower because a person’s RF 
exposure decreases rapidly with increasing distance from the source. 
The so-called “cordless phones,” which have a base unit connected 
to the telephone wiring in a house, typically operate at far lower 
power levels, and thus produce RF exposures well within the FCC’s 
compliance limits.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health 
problems are associated with using wireless phones. There is no 
proof, however, that wireless phones are absolutely safe. Wireless 
phones emit low levels of radiofrequency energy (RF) in the 
microwave range while being used. They also emit very low levels 
of RF when in the stand-by mode. Whereas high levels of RF can 
produce health effects (by heating tissue), exposure to low level RF 
that does not produce heating effects causes no known adverse 
health effects. Many studies of low level RF exposures have not 
found any biological effects. Some studies have suggested that 
some biological effects may occur, but such findings have not been 
confirmed by additional research. In some cases, other researchers 
have had difficulty in reproducing those studies, or in determining the 
reasons for inconsistent results.
I
I