Casio Ravine 3 Manual

							130
SETTINGS & TOOLS
Pedometer: Counts your steps with the pedometer. (On/Off)
Calibration: Calibrates the electronic compass.
Restore Defaults: Returns G’zGEAR
® settings to initial value. 
How To Use
You can display how to use G’zGEAR®. 
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK]. Press 
 To o l s. 
2. Select G’zGEAR, then press the Center Select Key [OK],  
How To Use.
Bluetooth Menu
Your handset supports the following Bluetooth® profile services 
and protocols: Headset, Handsfree, Dial Up Networking, Stereo, 
Phonebook Access, Basic Printing, and Object Push (for vCard 
and vCalendar).* You can create and store 20 pairings within the 
handset but connect to only one device at a time. The approximate 
communication range for Bluetooth
® wireless technology is up to 25 
feet.
*  Your handset is based on the Bluetooth
® specification, but it is 
not guaranteed to work with all devices enabled with Bluetooth® 
wireless technology. This handset does not support all Bluetooth® 
OBEX Profiles. For vehicle/accessory (sold separately) 
compatibility go to www.verizonwireless.com/bluetoothchart.  
						

							131
SETTINGS & TOOLS
NOTES
Read the user guide of each Bluetooth® accessory that you are 
trying to pair with your handset because the instructions may 
differ. 
Bluetooth
® accessories/peripherals must have a passkey to work 
with the mobile device. •
•
Power
To toggle Bluetooth® power On/Off: 
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK]. 
2. Press  Bluetooth Menu. 
3. Press the Left Soft Key [Turn On]. 
NOTES
By default, your handset’s Bluetooth® functionality is turned off. 
From idle mode, you can display the Bluetooth Menu by pressing 
the Center Select Key [MENU], selecting Bluetooth, then pressing 
the Center Select Key [OK]. 
From idle mode, you can toggle Bluetooth
® power on or off 
by pressing the Directional Key  right and pressing  
Bluetooth on /off.  •
•
•
Add New Devices
“Pairing” is the process that allows the handset to locate, establish, 
and register a 1-to-1 connection with the target device. 
To pair the handset with a new Bluetooth
® device: 
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK]. 
2. Press  Bluetooth Menu. 
3. Press  Add New Devices.  
						

							132
SETTINGS & TOOLS
NOTE
Above step automatically turns on your handset’s Bluetooth® power, 
even if it is turned off. 
4. The handset will prompt you with the following message on the 
main display: PLACE DEVICE YOU ARE CONNECTING TO IN 
DISCOVERABLE MODE. Press the Center Select Key [OK].
5. The device will appear in the ADD NEW DEVICE menu. Select 
the device you wish to pair with, then press the Center Select Key 
[PAIR].
6. The handset may prompt you for the passkey. Consult the 
Bluetooth® accessory instructions for the appropriate passkey 
(typically “0000”—4 zeroes). Enter the passkey, then press the 
Center Select Key [OK].
NOTES
You do not need to input the passkey for pairing when the 
passkey of the Bluetooth
® Headset or hands-free kit is 0000. 
For pairing with devices that do not have pre-defined passkeys, 
it is recommended that you use at least 8 characters as the 
passkey. •
•
7.  The handset will prompt you with the following message on the 
main display: Before Connecting To [Device Name]. If you would 
like to always confirm before connecting to the Bluetooth
® device, 
select Always Ask, then press the Center Select Key [OK]. The 
handset will prompt you with the message Connect to [Device 
Name]. Select Ye s, then press the Center Select Key [OK]. If 
you do not wish to confirm every time before connecting to the 
Bluetooth
® device, select Always Connect, then press the Center 
Select Key [OK]. 
						

							133
SETTINGS & TOOLS
8. Once connected, you will see the device listed in the Bluetooth 
Menu and the Bluetooth® device connected icon  will appear at 
the top of the main display. 
NOTES
In the Bluetooth Menu, you can disconnect the connected device 
with an icon 
 by pressing the Center Select Key [DROP]. 
Conversely, you can reconnect by pressing the Center Select Key 
[OK] again. 
When an audio device is connected, you can select another 
device and the connection is automatically transferred from the 
one to the other. 
If multiple devices are displayed, select the device to which you 
want to connect. 
Paring of the handset with a new Bluetooth
® device should be 
performed at a secure location.  •
•
•
•
Bluetooth Settings
Settings for Your Handset
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK]. 
2. Press  Bluetooth Menu. 
3. Press the Right Soft Key [Options] to select one of the following 
options:
To edit the Bluetooth
® name of your phone, press  My 
Phone Name. Enter a new custom name and then press the 
Center Select Key [OK] to save and exit.
To set whether your handset is able to be searched for by other 
Bluetooth
® devices in the area, press  Discovery Mode. 
Select On or Off, then press the Center Select Key [OK].
I
•
• 
						

							134
SETTINGS & TOOLS
To view brief descriptions of the profiles supported by the phone, 
press  Supported Profiles. Select one of the profiles, then 
press the Center Select Key [VIEW]. 
Settings for Paired Device
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK]. 
2. Press  Bluetooth Menu. 
3. Select the paired device, then press the Right Soft Key [Options]. 
4. Select one of the following options: 
Remove Device: Removes a device from the pairing list. 
Rename Device: Allows you to rename the paired device. 
Incoming Security: Set whether or not to confirm (Always Ask/
Always Connect) before connecting to the paired device upon 
receiving an incoming connection request from it. 
Service Discovery: Searches for services supported by the 
selected device. 
Device Info: Displays the paired device information. 
Sending and Receiving Name Cards
Use the following procedures to send and receive a Name Card via 
Bluetooth®.
Sending a Name Card
To send a name card to the paired device via Bluetooth®: 
1.  From idle mode, press the Center Select Key [MENU], select 
Contacts, then press the Center Select Key [OK], press  
Contact List. 
  Or, press the Right Soft Key [Contacts] from idle mode.
2. Select the Contact then press the Right Soft Key [Options]. 
3. Select Send Name Card, then press the Center Select Key [OK]. •
I
I 
						

							135
SETTINGS & TOOLS
4. Your contact entries will be displayed in alphabetical order. Select 
the contact you want to send, then press the Center Select Key 
[MARK]. 
5. Press the Left Soft Key [Done].
6. Select the receiving device and then press the Center Select Key 
[OK].
Sending My Name Card
To send My Name Card to the paired device via Bluetooth®: 
NOTE
Register My Name Card before performing the following steps.
For information about how to register My Name Card, see page 60.
1.  From idle mode, press the Center Select Key [MENU], select 
Contacts, then press the Center Select Key [OK].
2. Select My Name Card, then press the Center Select Key [OK]. 
3. Press the Right Soft Key [Options] then  Via Bluetooth, 
 Send. 
4. Select the receiving device then press the Center Select Key [OK]. 
Pulling a Name Card
You can use the following procedure to request a name card from 
another Bluetooth® device and add the received name card to your 
Contact List. 
NOTE
Register My Name Card before performing the following steps. 
For information about how to register My Name Card, see page 60. 
1.  From idle mode, press the Center Select Key [MENU], select 
Contacts, then press the Center Select Key [OK]. 
I
I 
						

							136
SETTINGS & TOOLS
2. Select My Name Card, then press the Center Select Key [OK].
3. Press the Right Soft Key [Options] then  Via Bluetooth, 
 Pull. 
4. Select the device and then press the Center Select Key [OK]. 
Receiving a Name Card
To save a Name Card received via Bluetooth® to your Contact List: 
1.  When Incoming Security is set to Always Ask, the message 
“Connect to:[Device Name]” will appear on your handset’s display 
when another Bluetooth
® device sends a name card to your 
handset. If you select Ye s and then press the Center Select Key 
[OK], the message “Want to Receive files?” will appear.
  When incoming Security is set to Always Connect, the message 
“Want to Receive files?” will appear on your handset’s display when 
another Bluetooth
® device sends a name card to your handset.
2. Select Ye s, then press the Center Select Key [OK].
Sending and Receiving Images 
To send and receive an image via Bluetooth®:
Sending an Image
To send an image saved on your handset to the paired device via 
Bluetooth®:
1.  From idle mode, press the Center Select Key [MENU], select 
Media Center, then press the Center Select Key [OK].
2. Press  Picture & Video,  My Pictures. 
3. Select the image you want to send, then press the Right Soft Key 
[Options]. 
4. Press  Send and then  Via Bluetooth. 
5. Highlight the image and press the Center Select Key [MARK], 
when finished, press the Left Soft Key [Done]. 
I
I 
						

							137
SETTINGS & TOOLS
6. Select the receiving device and then press the Center Select Key 
[OK].
Receiving an Image
To receive and save an image sent from the paired device via 
Bluetooth®:
1.  When Incoming Security is set to Always Ask, the message 
“Connect to:[Device Name]” will appear on your handset’s display 
when another Bluetooth
® device sends an image to your handset. 
If you select Ye s and then press the Center Select Key [OK], the 
message “Want to Receive files?” will appear. 
  When incoming Security is set to Always Connect, the message 
“Want to Receive files?” will appear on your handset’s display when 
another Bluetooth
® device sends an image to your handset.
2. Select Ye s, then press the Center Select Key [OK]. 
Keyguard Settings
Keyguard Timer
The Keyguard Timer feature locks the side keys to prevent them from 
being pressed accidentally in your bag or pocket. Set the period 
of time until side keys are automatically locked after the last key 
operation with the flip closed.
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK]. 
2. Press  Keyguard Settings,  Keyguard Timer. 
3. Select one of the following settings, then press the Center Select 
Key [SET].  
Always Off / Lock on Flip Close / 7 Seconds / 15 Seconds / 30 
Seconds
I 
						

							138
SETTINGS & TOOLS
NOTES
When Keyguard Timer is set to Lock on Flip Close, the side keys 
are locked as soon as the flip is closed. When unlocked with the 
flip closed, the handset will be locked again if you do not operate 
it within seven seconds. 
When you open the flip, the side keys will unlock. 
Even when locked, the side keys are still operational in the 
following cases:
During alarms and schedule alerts.
When the handset receives an incoming call.
During a call.
When the handset receives a PT T incoming call.
During a PT T call.  •
•
•
-
-
-
-
-
Unlock Options
To select how to unlock the side keys when the keyguard has been 
activated: 
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK].
2. Press  Keyguard Settings,  Unlock Options.
3. Select one of the following settings, then press the Center Select 
Key [SET]. 
 Press Once : Temporarily release the lock by pressing the Bottom 
Side Key  once with the flip closed.
 Press Twice: Temporarily release the lock by pressing the Bottom 
Side Key  then the Volume Key  down with the flip 
closed.  
						

							139
SETTINGS & TOOLS
PTT Settings
You can set the following Push To Talk (PT T) features.
PTT Mode
You can use the following procedure to turn the PT T feature On or Off.
When PT T is turned on, you will be able to send and receive PT T calls 
or alerts.
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK]. Press 
	 PTT Settings,  PTT Mode. 
2. Select On or Off, then press the Center Select Key [OK].
NOTE
The 3G or 1x service indicator icon on the top line of the main 
display is highlighted to indicate that the PT T service is available 
when turned On. 
PTT Alert
To set PT T Alert tone and vibration:
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK]. Press 
	 PTT Settings,  PTT Alert. 
2. Select To n e or Vibrate, then press the Center Select Key [OK]. 
To n e : Select a ringer, then press the Center Select Key [SET]. To 
play the alert tone, press the Left Soft Key [Play]. 
Vibrate: Select On or Off, then press the Center Select Key [SET].
PTT Tutorial
To display PT T tutorial: 
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK]. Press 
	 PTT Settings,  PTT Tutorial.